i have no computer on my car no wires going to my trans and it runs just fine. I say kick the plug to the curb. Make sure your detent cable is setup correctly or youll burn through this trans faster...
Type: Posts; User: jersyboyy; Keyword(s):
i have no computer on my car no wires going to my trans and it runs just fine. I say kick the plug to the curb. Make sure your detent cable is setup correctly or youll burn through this trans faster...
with my setup as si im looking at a 2500 stall, a 3000 would probally be too big but shoot me a pm with more info and a price. As for the rear bro im in Jersey so shipping would make even a GREAT...
13.6 with a 2.0 r/t at 101.12 for my first run then it just got WORSE! i ran high 14 then high 15 then a 13.8.
BALD tires in the rear at 25psi and i mean BALD.
Stock 3.08 open rear
Stock 700r4...
Thats a great cam, Im using that in my mild 357 right now nd I love it. Def a good cam esp for a 327.
3310-2 vaccum secondary carb, I decided against the edelbrock after taking the holley to a local speed shop. old school guy is rebuilding it tearing off the choke setup and putting a quick change...
Im picking up the springs and rear this weekend.
I had some help from the auto shop teacher at my old highschool.
My rocker arms were actually loose as hell!
We tightened them down properly...
4th gen 3:42 LSD rear with disc brakes-picking it up and putting it in 3 weeks.
Im currently rebuilding the carb I bought(used) because well its been through hell and back. Hopefully I can get the...
Das is true Steve.
Either way I need to rebuild my carb and just have fun driving it no matter how much power its making at this point. Thanks for the info guys.
http://www.compcams.com/Technical/DynoSheets/XE274H-10_001.asp
WOOT I stumbled upon this dyno sheet using almost the IDENTICAL setup im running. (their running the older Dart/World S/R...
Yea I did the old school way after my last post, im going to still do the chase the firing order method to be positive its right.
I will be taking the valve covers off tommorow and rechecking the rocker arms.
Turn the motor with a wrench untill the pushrod on the intake valve of the particular cyl is all the way up then...
Alrite well im going to loosen them al lup and run the motor and tighten them untill it stops clattering then give iti an extra 1/2 turn(just read how to do that now). Could this have bent a valve, I...
I wish I could but after 2k rpms it backfires from the carb & loses power. I cant get it running on the street properlly. I was thinking a worm cam lobe but all the rocker arms move like they...
Videos on streetfire.net
<a href="http://videos.streetfire.net/video/Camaro-with-new-parts-up_178939.htm"><img...
Rotella t and stp 4cycle oil treatment has more than enough zinc to break in the flat tappet cam. Only thing is its not cheap, you have to drain and fill the oil aftr the first 30 min break in period...
cam and crank gears wernt aligned!!! DOH, could ahve been BAD but after tearing it all down again and fixing it I did NOT bend any valves or anything. I proceeded to reset the distributor and SOUNDS...
Spent the last 5 days straight putting the motor together taking it apart and putting it back right. Cant get it to start. Iv been told to check the timing again, which iv already done a few times...
Hidden 150 shot is on my list for after I changed the stall and rear and throw some susp mods at it.
:) as am I prince. You mentioned when I first got the car that we should have done a wicked sbc build. Well it may not be wicked but I did manage to build something out of this.
If the car is...
Well with a good tune running at 5000+ rpms and the new heads alone should make more than 50 hp.
I mean im not dumb but that sounds logical to me!
I had the car dynoed a few months before I blew my headgaskets.
Performer intake, much smaller cam, 600 cfm carb, headers, stock exhaust, old crappy 882 heads.
200 horsepower to the wheels at...
WOW I personally know of a intake/carb/headers 305 thirdgen running 14.3.
In any event I know my rear is garbage and im planning on running an ls1 10 bolt with 3:73's. Lca's,panhard bar, strut...
Godswill my motor is going to be done soon. Iv been ordering parts and working on things with it for awhile now and I should have it up and running next week with pics and videos too.
Here is the...
That tranny cable has gotta be adjusted correctly, that is a simple thing a shop will do to fvck a guy over and make them come back for a tranny build.
Time for a th350, hell if you can find a...
Kickdown cable could be incorrectly set causing the transmission to slip which in turn will toast the tranny all together. Happened to me, get that check out if it hasn't done too much damage...