View Full Version : good dyno and tuner needed...
ACRturbo
10-20-2005, 11:03 PM
i have my 2001 neon r/t has a crane 14 (race) cam wiht aem cam gear. i will be purchasing a s-afc2 soon and want to get it dialed in correcltly, any one know where i can find one??
dave
i have my 2001 neon r/t has a crane 14 (race) cam wiht aem cam gear. i will be purchasing a s-afc2 soon and want to get it dialed in correcltly, any one know where i can find one??
dave
dave if you need more extensive tuning next year we'll have our in-house dynamometer and will be welcome to tune your safc2. www.beeyondeng.com
:thumbsup
tenchu
10-21-2005, 01:28 PM
dynotuned performance
1.608.826.0270
ACRturbo
10-21-2005, 05:42 PM
bee
were r u guys located and what can expect to pay for the tuning and dyno runs??
and tenchu were is dynotuned??
bee
were r u guys located and what can expect to pay for the tuning and dyno runs??
and tenchu were is dynotuned??
dynotuned is in madison...
we are in milwaukee.. www.beeyondeng.com <----check it out!!! all info in the website. :thumbsup
EvolvedRegal
10-24-2005, 05:06 PM
i have my 2001 neon r/t has a crane 14 (race) cam wiht aem cam gear. i will be purchasing a s-afc2 soon and want to get it dialed in correcltly, any one know where i can find one??
dave
Get a Innovate LC-1/XD-1 combo and do it yourself, probably cheaper. Who really cares about dyno numbers. Plus I wouldn't trust a certain AEM "specialist" near any of my cars.
ACRturbo
10-26-2005, 09:47 AM
BEE,
when is the soonest i can get my car in??
WilliamZ
10-26-2005, 11:57 AM
Like Bee said he won't have the dyno until next year.. :wstupid
Get a Innovate LC-1/XD-1 combo and do it yourself, probably cheaper. Who really cares about dyno numbers. Plus I wouldn't trust a certain AEM "specialist" near any of my cars.
next time when you speak don't be so "DIRECT" little kid!!! :loser :flipoff2: :flipoff2: :flipoff2: :flipoff2:
i wouldn't want to touch any of your weak cars anyhow. when you want to talk sh1t come to my shop and talk sh1t child.
Like Bee said he won't have the dyno until next year.. :wstupid
yeah like cdw81 said... around the march 06'... again to all the haters.. even the haters are allowed to use my dyno... yeah don't worry i wont overcharge like others do... i'll still hook your hate'n a$$es up!!! $60/hr sound good a$$holes??? :flipoff2:
acr: if you want it tuned go to borchart to use their dyno it's local... if you want to go out of town go to dynotuned... good luck bro!!! :thumbsup
Teufelhunden
10-26-2005, 01:47 PM
next time when you speak don't be so "DIRECT" little kid!!! :loser :flipoff2: :flipoff2: :flipoff2: :flipoff2:
i wouldn't want to touch any of your weak cars anyhow. when you want to talk sh1t come to my shop and talk sh1t child.You forgot to call him a "masher". :rolleyes: :wtf
You forgot to call him a "masher" :wtf
oh he is a masher... LMAO!!! ok you said that moparscott.... what a sh1t talker he is hey??? didn't even need his opinion about this infamous AEM specilist.. why don't his donky a$$ just PM this AEM specialist??? maybe he is a masher like you said scott.... ok he is!!! LMAO :thumbsup
Teufelhunden
10-26-2005, 04:35 PM
oh he is a masher... LMAO!!! ok you said that moparscott.... what a sh1t talker he is hey??? didn't even need his opinion about this infamous AEM specilist.. why don't his donky a$$ just PM this AEM specialist??? maybe he is a masher like you said scott.... ok he is!!! LMAO :thumbsup I forgot this ==> :rolleyes: in my post above
micro_machine
10-26-2005, 06:07 PM
Get a Innovate LC-1/XD-1 combo and do it yourself, probably cheaper. Who really cares about dyno numbers. Plus I wouldn't trust a certain AEM "specialist" near any of my cars.
Look at this guy talking S H I T agian hahaha this regal guy just need to stop blabing away on people thread go get a life and stop talking s h i t about bee dude hahaha low life :punch:
1fastsol
10-26-2005, 06:36 PM
hey acrturbo bee is aem tranined & certifced by aem. he still can tune your car for you and a diferent dyno. call him at the shop to make a apointment.384-8290
thank you guys... seems like in bcm people still like to sh1t talk... admins need to give warnings like other forums. if they should have something so personal to say come up to that person or better yet "PM" .. durh!!! :flipoff2:
GRNDNL
10-27-2005, 12:48 PM
Let us know when you get your Dyno in Bee, would be interesting to play around with my junk and see what we could get out of it... :D
EvolvedRegal
10-27-2005, 10:24 PM
oh he is a masher... LMAO!!! ok you said that moparscott.... what a sh1t talker he is hey??? didn't even need his opinion about this infamous AEM specilist.. why don't his donky a$$ just PM this AEM specialist??? maybe he is a masher like you said scott.... ok he is!!! LMAO :thumbsup
Pooptalker? hardly. Did I ever say I know the AEM software? No. Do I? I've taught myself enough to get by. I have seen some of the work that came out of your shop, some of it's good and some of it is well not so good. What do you want me to PM you about?
Call me what you will, it's only the internet. I think I'll get over it.
Let us know when you get your Dyno in Bee, would be interesting to play around with my junk and see what we could get out of it... :D
hey most certainly... i'd like to see the big daddy grand national engine with it's turbo whining..... i love the sound of blowers/turbos!!! :thumbsup
Pooptalker? hardly. Did I ever say I know the AEM software? No. Do I? I've taught myself enough to get by. I have seen some of the work that came out of your shop, some of it's good and some of it is well not so good. What do you want me to PM you about?
Call me what you will, it's only the internet. I think I'll get over it.
let me explain myself a bit dude... "the not so good" work is because we literally have to work off backyard mechanic's work. Imagine someone putting a turbo kit on from scratch and used home depot tubing, duck tape...they then bring it to us and we tune and redo only limited work for them due to their funds...they sign and literally say to just do again "limited work"..so wtf aM i going to say no to business???... WTF dude!!! DON'T KNOW when people are going to understand this... goosh...this is like the 3-4time i've had to explain this... ok i know we'll stop working on RIGGED up cars...hehe!!! :thumbsup :banana
now about our good, nice clean work....yeah many have seen it. and yes it is VERY expensive. isn't KING Motorsports, AMS, etc etc expensive... yes.. they are!!! Come in here and tell us you want top notch Down Pipes, Turbo kits, etc etc... We qoute you for top notch labor and parts...no cheap sh1t... simple as this: " you get what you pay for " :thumbsup
EvolvedRegal
10-28-2005, 07:48 PM
now about our good, nice clean work....yeah many have seen it. and yes it is VERY expensive. isn't KING Motorsports, AMS, etc etc expensive... yes.. they are!!! Come in here and tell us you want top notch Down Pipes, Turbo kits, etc etc... We qoute you for top notch labor and parts...no cheap sh1t... simple as this: " you get what you pay for " :thumbsup
I guess if you want to work on someone elses problems thats on you. Do I give you credit for doing it? Sure. I have seen my share of home depot jobs and it kind of amusing, people trying to cut corners with PVC or dryer ducting, I wouldn't be suprised if some of those people are either on here or lurk here. SE WI isn't known for splurging unlike chicago where I am most every weekend.
But I have seen my share of very top notch work, and sad to say none of it has been near mil-town. I would go into depth but really would rather PM you about it to try and keep the flaming down.
Call me biased which, yes, I am. AMS makes very good products and they build top notch cars which I'm sure some of you have seen around the internet. But me being me always like to do it myself. I RESEARCH what work and what doesn't, do some of the dumb @sses around here do that? Not likely.
I will retract what I said earlier in the thread. Happy everyone???
Bee I will PM you with a more defined explanation.
Berettaspeed
10-29-2005, 06:30 PM
yeah a Dyno right next door. LOL
Bee, thats cool you will have a dyno. How much are you planning on charging? I know it may be early but JW. I finished my car, but in spring it will be RDY to dirve right away. im doing tunning right now. then ill let it sit over winter. I called you guys a couple of times with needed couplers and such. Rigged projects are cool. :rice
Syclone0044
10-31-2005, 03:18 PM
But me being me always like to do it myself. I RESEARCH what work and what doesn't, do some of the dumb @sses around here do that? Not likely. Hey I'm the same way :thumbsup I can't afford to buy shlt that doesn't produce RESULTS.. So it's nice to see someone with the same attitude. What major stuff does your Evo have done? How fast is it? Can you post the details (or PM if you'd prefer)? :)
ACRturbo
10-31-2005, 07:32 PM
yeah like cdw81 said... around the march 06'... again to all the haters.. even the haters are allowed to use my dyno... yeah don't worry i wont overcharge like others do... i'll still hook your hate'n a$$es up!!! $60/hr sound good a$$holes??? :flipoff2:
acr: if you want it tuned go to borchart to use their dyno it's local... if you want to go out of town go to dynotuned... good luck bro!!! :thumbsup
Cool, i will probably be getting in contact with you soon, if i could use borchardts dyno and you could tune the s-afcII for me that would be awesome, but probably expensive as hell. i will probably just wait untill your dyno goes in though, its winter soon ne ways.
Cool, i will probably be getting in contact with you soon, if i could use borchardts dyno and you could tune the s-afcII for me that would be awesome, but probably expensive as hell. i will probably just wait untill your dyno goes in though, its winter soon ne ways.
yeah it will be expensive.. definitely more then what i'll be charging. I'm figuring $65 for hooking up and 2 initial base run. $65/hr after that.. which is pretty fair. see you guys soon!!! :thumbsup
remember even if you don't need my expertise, you can rent the dyno yourself and do your own tuning..etc etc.. :thumbsup
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.