PDA

View Full Version : Lots of thirgen stuff



OldSchoolSS
05-22-2005, 11:58 AM
Hi guys I've decided to get rid of all my thirdgen stuff. I need the garage space back. I live near Fond du Lac, WI. My zip code is 53006. I can ship out some of the smaller stuff and some of the larger lighter stuff. I prefer local sales though. If you want any of this stuff it goes to first come first serve. Prices are pretty firm unless it's a large item and you are local to me. Pictures can be provided upon request. But please only ask for pictures if you are serious about buying the items. I only have a connection that runs at 24kb/s so sending pictures is a pain in the ass. Well here is what is for sale. All prices are plus shipping.

1986 Camaro Z-28 Shell very solid no doors, no wiring harness, no hatch, no front clip, basically as gutted as can be comes with the rear-end. Would make a great starting point for a race car or a complete frame off restoration. Clean title $100.

1 Set of 82-92 z-28 doors, with glass and power window motors. These doors are decent there is some rust on the lower lip. $100 a pair or $50 each.

1 Set of 82-92 Camaro Doors, Cleaner than those listed above, these are manual crank door and come with the glass. $100 a pair.

1 Set of 82-92 Camaro Front Fenders, some rust no rot. $100 a pair.

1 82-92 Camaro Flat hood, good shape one small dent no rot $50.

3 82-92 Camaro Hatches. Two have defrost one does not. $50 each.

Complete Gray interior plastic pieces, They are in pretty good shape. $100 for all.

85 2.8 MPFI engine, 180,000 miles runs strong. $75.

85 V6 T5 Transmission, 80,000 on rebuild $75.

92 WC V6 T5 Transmission, 75k miles previous owner said it was in perfect shape $150.

91-92 Aero Ground Effects Compete set including front bumper cover and rear bumper cover. Plus the front steel bumper and Honeycomb great condition! $350.

91-92 Z-28 hood blisters, no broken studs Sold to cam91rs1

85-90 Z-28 Ground Effects, All there but need a little tlc to be 100% include front bumper cover lower spoiler plus rear bumper cover. $150.

2 Camaro Dash pads , One has a little crack on the corner that rests under the winshied and isn't visable when installed. The other has no cracks but has a little nick in the surface that could be repaired by a doctor vynil guy for $10 . $75 each

1 92-82 3:42 gear rear end, drum to drum $75 Sale Pending

1 90-92 Camaro dash with 110 mph V8 gauge cluster and wiring. Perfect condition $150.

1 light gray trunk security panel. This is the piece that installs in the trunk of a vehicle and has a lock on it so you can put valuables under it, it comes with rear trim piece but no key. $30 Sale Pending

1 82-92 Five speed console, complete and in decent shap. Shifter plate/boot sold have the rest of the console make an offer.

Also a set of old style IROC Wheels, they need some tlc. $100.

I have a lot of other parts that I can't think of right now. I also have a complete 85 V6 parts car. Two tilt steering columns. and a lot of other thirdgen stuff. Ask and I might have it. Please send all inquiries to scottsterr@gmail.com my ebay feedback is under camaro-man67, thanks for looking!

Knyghtmare
05-22-2005, 03:07 PM
91-92 Aero Ground Effects Compete set including front bumper cover and rear bumper cover. Plus the front steel bumper and Honeycomb great condition! $350.

91-92 Z-28 hood blisters, no broken studs $100.


What color are all of these and in what shape is the paint?

OldSchoolSS
05-22-2005, 05:27 PM
They are just in primer. I would strip them down to bare plastic and repaint them before I put them on a car.

Thanks,

Scott

OldSchoolSS
05-22-2005, 09:30 PM
Knyghtmare - Are you still interested? Let me know there is a member on another board that is interested in the blisters but I'm giving you priority since you asked first.

Thanks,

Scott

Knyghtmare
05-22-2005, 10:00 PM
Nah its ok, they can have them. Thanks.

OldSchoolSS
05-23-2005, 12:12 AM
Alright thanks for the interest.

loud91rs
05-23-2005, 03:50 PM
how much rust is on the rolling chassis? t tops? what can you all tell me about it. what color? power windows/locks? thanks.

OldSchoolSS
05-23-2005, 05:14 PM
There isn't much rust on it at all. There was a little on the wheel lip on the rear quarters. There also was some in the seams on the rear wheel wells I already had prepped the area for patch panels. The floor has a bout two holes the size of a dime other than that it's as solid as can be. I looked for a long time to find a car this solid. Most were completely rotted away where the lower control arms attaches to the underbody. The car is a hartop car, but I do have a roof off of a t-top car and all the interior trim pieces, and mouldings plus the glass. I would sell all of that for what I paid for it $80 extra on top of the price of the car. If somebody bought the roller I would give them the the doors for a extra $25, they have power windows in them. The car is multiple colors red/black/primer

Thanks,

Scott

theavenger333
05-24-2005, 02:45 AM
wish you had done this a little while ago, i'd of snatched up that 85 sixer and 5 speed

slow90z
05-24-2005, 09:58 PM
Im really interested in the rolling chassis. Do you happen to have any pictures of the rust spots?

OldSchoolSS
05-24-2005, 11:33 PM
I'll take pictures tomorrow. PonyKiller87 took a look at it when he picked up some parts. If you shoot him a PM he can tell you how solid it is.

Thanks,

Scott

PonyKiller87
05-25-2005, 08:40 AM
Yeah I seen it, its pretty solid other than the part scott was talking about where he started to fix it around the rear wheel wells on the inside. Over all it looked pretty solid but it would still take some work to get it painted and looking good.

slow90z
05-25-2005, 03:39 PM
Cool cool, ill see when me and my buddy could come get it. Ill let ya know soon.

OldSchoolSS
05-25-2005, 05:40 PM
That sounds great, if you email me at scottsterr@gmail.com I'll reply with some pictures of the rust areas. Also did you want the doors with the rolling chassisr?

Thanks,

Scott

slow90z
05-27-2005, 09:48 AM
Nah, im getting it because my car have is pretty clean interior wise, and the doors are good. Just mine has pretty rusty quarters, and id just like a body that I can slowly work on and weld a 12pt cage into and stuff like that. I dont need the t-top roof, because itd be pointless to have t-tops with a cage in my opinion. My buddy is cool with letting me use the trailer. SO... im going to be up north all weekend, but probably one of the weeknights next week. That work for you?

PonyKiller87
05-27-2005, 10:43 AM
and weld a 12pt cage into

I just so happen to have a cage for sale very cheep. New it goes for $600, Im lookin to get $100 obo for it. If your interested Ill get you the specs and a picture of it.

OldSchoolSS
05-27-2005, 07:20 PM
slow90z - That sounds good. That's good that it's a trailer. I forgot the previous owner took the rear inspection cover off the differential and didn't put it back on. I don't think you would make it that far with a dolly haha. Have a good weekend up north.

-Scott

slow90z
06-01-2005, 03:32 PM
Thanks, had a really good time. My buddy couldnt get the trailer for last night, but is trying to see if he can use it this weekend. (He has a 70 cutlass on it right now).

OldSchoolSS
06-01-2005, 04:26 PM
Sounds good. I'll be in madison saturday and sunday morning. But I'll be around friday night or my father will be home and he can help you guys out if you want to come on Saturday.

OldSchoolSS
06-02-2005, 07:42 PM
Oops I got my weekends mixed up. I'll be home all this weekend and next weekend I'll be in madison. If you come Saturday it would be best if it was before 6:00, I have a bachelor party to go to.

danwaite
06-05-2005, 08:41 AM
1 92-82 3:42 gear rear end, drum to drum $75 Sale Pending
Sold Yet ?

OldSchoolSS
06-06-2005, 06:18 PM
Not yet there is one more person in line if the sale falls through I'll put you @ the # 3 position.

slow90z
06-09-2005, 05:27 PM
I still really want to buy the shell, but I had to fix my truck, and spent the money I was going to buy the car with, so I dont have money for it until next friday unfortunately.

OldSchoolSS
06-09-2005, 06:58 PM
I understand that's how things usually worked out for me when I wanted something. I'm going to be out of the state next weekend some people will still be home but they will be of no hlep to you if you wanted to pick up the car. Any time during the week or the weekend of the 25th and 26th I'll be around.

Thanks,

Scott

slow90z
06-10-2005, 12:55 AM
Ok, thanks alot. I will def. let you know though when I do have money in hand and have time to make a run up there to get the car.

88camaro
06-10-2005, 08:38 AM
I just so happen to have a cage for sale very cheep. New it goes for $600, Im lookin to get $100 obo for it. If your interested Ill get you the specs and a picture of it.


do you still have it?

PonyKiller87
06-10-2005, 01:33 PM
Sorry, I sold it to a guy at Thirdgen Fest

DFJ6000
06-14-2005, 12:44 AM
would you by ne chance have an electric hatch module for an 88 camaro?

OldSchoolSS
06-14-2005, 05:59 PM
I have the motor, and also the release popper is that what you mean by module, or is it something under the dash?

DFJ6000
06-14-2005, 10:15 PM
i think you have what i need. On the hatch theres the black little box with 2 metal clips that touch to the pad on the actual car, my one clip is broken so it doesnt latch ne more. do the ones you have work? and how much for it?>

OldSchoolSS
06-15-2005, 09:57 PM
I'll look for it tomorrow.

OldSchoolSS
06-21-2005, 10:03 PM
DFJ6000 - I do have the hatch module. Make an offer.



slow90z - any way you could pick the car up Friday night or early Saturday mornign. My parents are getting pissed about it sitting in the yard. And I'm having friends from school up and I don't want to portray a hick image by having 15 cars sitting out. Haha.

Thanks

slow90z
06-22-2005, 11:27 AM
I can see what I can do maybe saturday morning.

OldSchoolSS
06-22-2005, 05:12 PM
Thanks that would be great!

350-Z28
06-26-2005, 03:04 AM
Do you happen to still have a drivers side front fender? If so would you be willing to part with just that one fender and how much? Also if you happen to have the 90-91 sideskirts how much on thos and the front clip? Or do you have a drivers side rear view mirror that isn't broken? Any info would help thanks.

OldSchoolSS
06-26-2005, 10:51 AM
Do you happen to still have a drivers side front fender? If so would you be willing to part with just that one fender and how much? Also if you happen to have the 90-91 sideskirts how much on thos and the front clip? Or do you have a drivers side rear view mirror that isn't broken? Any info would help thanks.

I have the drivers side fender there is a little rust in one area of the lip should be an easy repair. I would like $40 for it. If by sideskirts you mean rocker panel GFX I have those, both the 85-90 style and the 91-92 style. The 85-90 style I'll split up, but not the 91-92 style. What do you mean by front clip? The front bumper cover and air damn? For the 85-90 style I'll give you everything for 150 or if you don't need the rear bumper cover and quarter GFX you can have the front stuff for 110. For the 91-92 the best price I'll do is 300 for everything(front and rear bumper covers, Front impact bumper and honeycomb, door, rocker and quarter panel GFX pieces, plus the super hard to find perfect condition front lower spoiler). I also have a drivers side rear view mirror that isn't broken. I have a power and manual one. $20 for the manual mirror and $25 for the power mirror.

I just checked out your profile and it said you have a 84 Z-28 I also see you wanted the 91-92 style GFX like I said 300 for everything you won't find a cleaner set for cheaper. I've seen sets in my condition go for 600 on ebay a few years back when I bought mine. You'll need the rear stuff too. You can't use the 84 stuff it will look funny. My friend did that on his 84Z and he really regrets it. The 84 stuff is shorter and narrower than the 91-92 stuff.

Thanks

350-Z28
06-27-2005, 10:54 PM
That's one question I had, about the parts matching up, kinda figured it wouldnt, i gotta see how the next few things go on my camaro, first thing is i need it running, so we'll see the damages on that. If it's not all that bad give me a few weeks and i'll for sure get the 91-92 GFX kit, mirror has to be manual, trying to keep it more original, and less complicated, and fender so long as it is not dented. The mirror and fender can wait, the GFX would be my first buy simply because i want it to look really nice. I'll keep you posted on the condition of my budget and when i could fit it in, just let me know if it sells, if someone beats me to it oh well, not skin off my back so no pressure.

OldSchoolSS
06-28-2005, 04:54 PM
No problem, I'll hold the GFX for you since your local. There has been a couple of people out of state that wanted the kit but I don't want to mess with shipping that big of an item. I also have the 91-92 style hood blisters yet the guy said he said a money order about 3 weeks ago but I haven't seen one in the mail and he stopped responding to my emails so I think he was just hoping I would send the parts out in good faith so he could get some freebies. The hood blisters won't work on a 84 hood you need a 85-92 hood for those. I don't have one available either.

350-Z28
06-28-2005, 11:28 PM
Hood blisters wouldnt do much good, running cowl induction because of the high rise manifold i bought from NVR racing. Appreciate the offer though.