wiredgtp
03-01-2005, 09:34 AM
...since my post count is pretty low, I'm sure there are a few people here that can vouch for me...
$13,000 Modded as it sits without chrome wheels or $13,500 modded with chrome wheels
$12,000 back to stock without chrome wheels or $12,500 back to stock with chrome wheels
Looking to sell very very soon.
Pictures can be seen
Pics 1 (http://www.wicgp.com/chris/done)
Pics 2 (http://www.wicgp.com/chris/done2)
Pics 3 (http://www.wicgp.com/chris/shoot3)
Pics 4 (http://www.wicgp.com/chris/shoot4)
Pics 5 (http://www.wicgp.com/chris/wheels)
Current mod list: (im sure im missing some)
TOG headers to 3" custom exhaust
Intense Gen1 1.91 ratio rockers
CompCams Hi-Tech Pushrods(NIB not installed)
Eibach Gen2 Sport Springs
ASCD HO Style hood
ASCD SD Style Spoiler
Impala Police Package Rear Sway bar
12" front brake upgrade kit
Clear Corner lights (with reflector)
Gunmetal Altezzas (rear lights)
SS Aluminum Grills (from PFYC - upper and lower installed)
Shaved Trunk Lock Shaved Door moldings
Paint - One of a Kind - I say one of a kind because there are two layers of color before the clear coat. (different drying times on either layer would have resulted in a different final color)
PPG Radiance II series
Cinnamon Candy over Brickyard red. The door jams are also painted, so when you open the doors, you see the same paint on the inside. The only part that was not painted was under the hood. Funds were tighter than I thought and that would have probably doubled my final cost. Front and rear fascias are painted with a PPG Radiance II series bright silver
Stock MoonRoof
Stock Leather
Digital Horsepower PCM v1 with custom tweaks for rear02 sensor
TEP(Thrasher Engineered Performance) Modular pulley system with 3.25" and 3" pulleys
PVC Fenderwell intake (also have a custom CAI that is 99% complete)
2 9" K&N filters
Lotek 2 gauge pod with Trans Temp and Boost gauges installed
http://www.wastedincome.com/NWTC2004-6.jpg
$13,000 Modded as it sits without chrome wheels or $13,500 modded with chrome wheels
$12,000 back to stock without chrome wheels or $12,500 back to stock with chrome wheels
Looking to sell very very soon.
Pictures can be seen
Pics 1 (http://www.wicgp.com/chris/done)
Pics 2 (http://www.wicgp.com/chris/done2)
Pics 3 (http://www.wicgp.com/chris/shoot3)
Pics 4 (http://www.wicgp.com/chris/shoot4)
Pics 5 (http://www.wicgp.com/chris/wheels)
Current mod list: (im sure im missing some)
TOG headers to 3" custom exhaust
Intense Gen1 1.91 ratio rockers
CompCams Hi-Tech Pushrods(NIB not installed)
Eibach Gen2 Sport Springs
ASCD HO Style hood
ASCD SD Style Spoiler
Impala Police Package Rear Sway bar
12" front brake upgrade kit
Clear Corner lights (with reflector)
Gunmetal Altezzas (rear lights)
SS Aluminum Grills (from PFYC - upper and lower installed)
Shaved Trunk Lock Shaved Door moldings
Paint - One of a Kind - I say one of a kind because there are two layers of color before the clear coat. (different drying times on either layer would have resulted in a different final color)
PPG Radiance II series
Cinnamon Candy over Brickyard red. The door jams are also painted, so when you open the doors, you see the same paint on the inside. The only part that was not painted was under the hood. Funds were tighter than I thought and that would have probably doubled my final cost. Front and rear fascias are painted with a PPG Radiance II series bright silver
Stock MoonRoof
Stock Leather
Digital Horsepower PCM v1 with custom tweaks for rear02 sensor
TEP(Thrasher Engineered Performance) Modular pulley system with 3.25" and 3" pulleys
PVC Fenderwell intake (also have a custom CAI that is 99% complete)
2 9" K&N filters
Lotek 2 gauge pod with Trans Temp and Boost gauges installed
http://www.wastedincome.com/NWTC2004-6.jpg