PDA

View Full Version : F-body & LS1 Parts For Sale....



Crawlin
11-21-2004, 11:09 PM
LS1 T56 trans
Stock. drives fine, could use a rebuild if you wanted to increase it's strength and durability. just not what i want in my car anymore

$750 - Pending Sale

Spec Stage 3i Clutch & Billet Steel Flywheel
2000 miles on it TOPS. One trip to the track. Proper break in done.
(new = $419 + 139 for "I" option + 199 flywheel = $757)

$500

HD Steel 3" Driveshaft
Have to measure length for specifics, but was built to fit a 6spd/9" combo. Has 1350 u-joints, HD input shaft ($389 new) 3 track passes, 50 miles on it

$300 - SOLD

Pro 5.0 Shifter
same as clutch mileage, stock knob

$125 - SOLD

Agostino Racing Engines Stage 3 Ported 5.7L Heads -


Stage 3B “Big Bore
Available in LS1/LS6/LQ9/5.3L Castings
5 Angle Valve Job
Custom Manley 2.08-2.10 Intake / 1.57 -1.60 Exhaust Valves
Custom Double Valve Springs
Titanium Retainers
Prepared for Larger Bore Size (4.00 to 4.125 Bore)
Custom Port Volumes to match Engine Size and Desired RPM Range
Full Competition Race Port and Polish Intake / Exhaust Ports
Fully CNC Ports & Chambers then Hand Finish to Equalize Airflow
Unshroud Combustion Chamber (Extensive Chamber Work) to Desired Bore Size
New Interlocking Hardened Valve Seats
Bronze Valve Guides
Hot Tank and Thoroughly Inspect Cylinder Heads
Viton Valve Seals
Resurface Heads to Desired Compression and Set Combustion Chamber CC
Set all Valve Spring Pressures and Heights
Fully Assembled and Ready to Bolt on

Price: $2,800.00 USD plus Head Core NEW$1450('99-'02 valvecover style)

FAST LSX 78mm Intake/Stock F-body TB -
Painted dark red, drilled/tapped for direct port nitrous kit

http://www.ls1speed.com/pictures/DSC01590.jpg

$550

Weld Pro Star 15x3.5" Fronts & 15x10" Rears
Fronts have regular radials on them, Rears have 28x11.5" Hoosier QTP Pros. Probably 10 passes on the rear tires. Plenty of life left. Comes with the right lug nuts for stock diameter studs and with correct front wheel spacer to not grind front caliper on F-body. 1.75" BS on fronts, 7.5" BS on rears Meant for a 4th gen F-body

$750
OR
$650 & stock 16x8's don't care condition of rims or tires
PENDING SALE ON FRONTS ONLY

GM 10 bolt rear end
Stock GM 10 bolt rear end w/ 3.42 gearing, disc to disc, 4 channel system.

$150

Neutral/Grey Leather Seats
Good condition. small hole on driver's side seat, rest of the seats are great condition, power driver's seat, fronts and backs

$350

Chris

Yooformula
11-21-2004, 11:25 PM
:confused :wowAre you finally selling this thing?

john96ws6
11-21-2004, 11:53 PM
DAMMIT! I couldn't be anymore broke right now. Horrible timing. :mad:
In a few months I'll be interested in the clutch/flywheel, driveshaft, pro 5.0, and prostars. :goof
Seriously though if you still got them I will be in the market. :crying

Jake B. (Killer Quad)
11-22-2004, 07:22 AM
aaaaaaaaaahhhhhhhhhhhhh need to sell Grand am now!!!!!

Hey chris dont let that clutch/flywheel or tire/wheels go too quick lol
I'm digging for cash right now! Maybe I'll just beat the money out of someone :chair:

Crawlin
11-22-2004, 09:02 AM
just parting out what i don't need :)

winter is gonna be long this year i have a feeling, so i can save more money.

Chris

Shifter will be sold soon to Zkid14. he had first dibs

PonyKiller87
11-22-2004, 09:20 AM
Chris, Ill take that shifter if you still have it. Let me know, I should be able to swing it this week.

Crawlin
11-22-2004, 10:07 AM
i was told by my buddy matt(zkid14) that he would take it, so for right this second it's sold, but we'll see what happens.

PonyKiller87
11-22-2004, 10:51 AM
Not a problem, if he decides he doesn't want it let me know.

Zkid14
11-22-2004, 02:24 PM
yea ill still take the shifter chris, just need to figure out a time to pick it up, off school all this week so ill give you a holla

-Matt

Crawlin
12-06-2004, 11:10 PM
TTT - The demodding process has begun