Old Guy
12-11-2013, 02:06 PM
I built this one and have not had a use for it. This is a standard bore 880 factory roller cam block with 4 bolt mains that is drilled for a fuel pump if needed. This with the standard bore is a 377 cubic inch motor. Crank is a stock 400 with a rear seal adaptor to intall into a one pieces seal block. Rods are new Pro Comp 5.7 with floating pins. Pistons are new Speed Pro flat tops with a 10.7 compression with a 64cc head. This is all new and balanced and will include the windage tray and factory 5qt. pan. $1200. This can be finished off with your choice of heads and cam. PH. calls only. 920-901-9777