Bart H
09-18-2013, 03:26 PM
SOLD
This isn't mine but is local and posted for a longtime friend.
8279
Black/Black
78,797.4 miles
Cladding perfect
very nice condition interior and exterior
Motor Built 2006 by Rockford Racecraft
Shot peened, Cryogenically frozen and nitride coated crank
Crane Cam
Eagle rods and pistons with thermal barrier coating
roller rockers
heads port matched and machined on flow bench
zero gap rings
50# injectors
PTE 63 hybrid turbo
3" downpipe and stock exhaust manifold jet hot 2000 coated
Hi flow cat
Borla 3" Stainless exhaust
Aquamist alcohol injection
Dequick heat exchanger with dual spal fans and upgraded Shurflo pump on stock water/water intercooler
urethane mounts
700R4 trans
2800 8"/11" hybrid hi stall torque converter
upgraded sprag, pump and red kevlar bands
urethane mounts
cold air intake in front of passenger front wheel
battery relocate to cargo area with kill switch
Stillen cross drilled front rotors
Billstein sport shocks
Flex a form 225# fiberglass mono leaf spring with 2" drop
Cal Trac traction bars
urethane bushings and torsion bar mounts
drive shaft loops
1994 corvette ZR-1 wheels with 275/40/17 front and 315/35/17 Advan AO32R
Stock wheels with Blizzaks
A pilar dual gauge cluster with autometer boost/vaccum and intercooler temp gauges
Grant evolution steering wheel
Infiniti Kappa speakers
Scroth Harness
Stock intake, steering wheel, heat exchanger and turbo included
Motor has developed and clack in the top end, maybe as simple as a lifter or more involved, I don't have the time or money to diagnose and fix., Ran 1.59 60 foot, 12.20 1/4 mile ET and 0-60 mph in 3.2. Good drag, autocross and show vehicle.
I have over $60,000 invested
$6,000 obo
dwolkomir75atgmail.com
This isn't mine but is local and posted for a longtime friend.
8279
Black/Black
78,797.4 miles
Cladding perfect
very nice condition interior and exterior
Motor Built 2006 by Rockford Racecraft
Shot peened, Cryogenically frozen and nitride coated crank
Crane Cam
Eagle rods and pistons with thermal barrier coating
roller rockers
heads port matched and machined on flow bench
zero gap rings
50# injectors
PTE 63 hybrid turbo
3" downpipe and stock exhaust manifold jet hot 2000 coated
Hi flow cat
Borla 3" Stainless exhaust
Aquamist alcohol injection
Dequick heat exchanger with dual spal fans and upgraded Shurflo pump on stock water/water intercooler
urethane mounts
700R4 trans
2800 8"/11" hybrid hi stall torque converter
upgraded sprag, pump and red kevlar bands
urethane mounts
cold air intake in front of passenger front wheel
battery relocate to cargo area with kill switch
Stillen cross drilled front rotors
Billstein sport shocks
Flex a form 225# fiberglass mono leaf spring with 2" drop
Cal Trac traction bars
urethane bushings and torsion bar mounts
drive shaft loops
1994 corvette ZR-1 wheels with 275/40/17 front and 315/35/17 Advan AO32R
Stock wheels with Blizzaks
A pilar dual gauge cluster with autometer boost/vaccum and intercooler temp gauges
Grant evolution steering wheel
Infiniti Kappa speakers
Scroth Harness
Stock intake, steering wheel, heat exchanger and turbo included
Motor has developed and clack in the top end, maybe as simple as a lifter or more involved, I don't have the time or money to diagnose and fix., Ran 1.59 60 foot, 12.20 1/4 mile ET and 0-60 mph in 3.2. Good drag, autocross and show vehicle.
I have over $60,000 invested
$6,000 obo
dwolkomir75atgmail.com