PDA

View Full Version : Quality Barrel work: cut/crowning in SE WI ?


Russ Jerome
08-01-2013, 11:32 PM
Is there any high end barrel machinest in SE WI?
Cutting 4" off a HIGH quality Savage blank, precision barrel.
HITMAN
08-02-2013, 02:38 PM
Krieger is up in Germantown. I doubt if they mess with other people's barrels, but it'll only cost you a phone call to find out.
http://www.kriegerbarrels.com/
UnderPSI
08-02-2013, 07:33 PM
Wisconsin Tactical has had a barrel for over three months now... So maybe not them lol
BadAzzGTA89
08-02-2013, 07:43 PM
There is a place i deliver to in Jackson that makes barrels for sniper rifles for the government.
http://www.bartleinbarrels.com/
Russ Jerome
08-08-2013, 11:14 PM
Wisconsin Tactical has had a barrel for over three months now... So maybe not them lol

You need to text/message me for inside info there...great guys but yah lets talk.
Im keeping my 24" barrel now, will post pic im gonna run a long gun for a while!
Wagonbacker9
08-09-2013, 08:19 AM
Loud91rs does lathe work. If you tell him how you want it crowned I'm betting he could do it.
Reverend Cooper
08-09-2013, 12:16 PM
What badazz said
Russ Jerome
08-25-2013, 10:21 PM
Thanks for replies, thinking I may take just a few inchs off for a muzzle brake, want to see the squirrels explode thru scope when the 168 grain boat tail hits em ;)
Wagonbacker9
08-26-2013, 09:40 AM
define... overkill.
USMARINE1108
10-29-2013, 08:51 AM
Did you ever get this done? If not, I can point you in the right direction. If you got it done, how did it turn out?

What barrel is it?
Russ Jerome
10-30-2013, 09:45 PM
I did not get it done, had a great deal on a 6.5x284x 26" barrel but was a dead beat seller :(
I still plan on doing my 308 or another after deer season, Im so dialed in I don't want to down gun till December.
loud91rs
11-01-2013, 08:12 PM
I could possibly help you out. I have done work on barrels, mostly turning/undercutting/threading for a suppressor or flash hider. I usually make a bushing to chuck up the barrel and put it in a cnc.
Russ Jerome
11-01-2013, 09:07 PM
Im gonna check your schedule after deer season, have an idea for this stock barrel I would like to try for sure.
loud91rs
11-02-2013, 11:53 AM
Just let me know. I looked up the crowning and from what I gather it is just a 10 degree angle on the ID to the OD. Easy stuff. I should really invest in the equipment to make my own barrels...
Wagonbacker9
11-02-2013, 12:23 PM
Just let me know. I looked up the crowning and from what I gather it is just a 10 degree angle on the ID to the OD. Easy stuff. I should really invest in the equipment to make my own barrels...

I support this idea.