PDA

View Full Version : New Dyno Results - 908awhp / 832awtq



JRink
02-12-2013, 10:59 PM
Some good news from this week. Ray Pampena from Pampena Motorsports in NY came to Wisconsin to finish the race gas and pump gas tunes on my car. The results easily exceeded my expectations.

We ended up with the following numbers:
Race/meth: 908.98awhp / 832.75awtq
Pump/meth: 714.21awhp / 642.70awtq

Ray and I spent a few hours at Late Model Throttle in Waukesha getting the tune done. I have to give big THANKS to Jeff from LMT for his time, tools, and assistance during various stages of our tuning process (you saved our bacon with that spare t-fitting for the meth). Couldn't have asked for a better shop to get this done. My hats also off to Tim Zimmer (twicks69) for offering his help on the dyno and for the good times at Hooters later that Monday evening. :thumbsup

I know a lot of people care about peak #’s, but, I don’t give much concern to that. What is important to me is power under curve. THIS is where the biggest improvements were made. I did some comparisons to my previous race gas dyno graphs (840-850awhp range), and this new race gas tune by Ray has 75-100awhp MORE under the ENTIRE curve at LESS boost than before, and the motor is still quiet and purring along. Some of the improvement seen are from mechanical changes I’ve made since previous dyno pulls, mainly pesky fixes and various quirks, and some coming from Ray’s tuning and knowledge with these cars -- I've attached my current 908awhp dyno versus manually overlaying (plotting) my previous dyno graph from last year, what a difference.

There's more left untapped in the setup but, eh... it's plenty good for now. I chose to call it a day when I realized there’s no point in going further unless I’m just looking for a specific number. The car is still healthy, and that’s what matters most.

I’m also really happy with these Midwest Turbo Connection Stage-4 Turbos (7659B). They spool crazy fast (full boost at 4200rpm on pump) and power is insane. They are a perfect fit for what I’m hoping to get from my car.

The pump gas tune was better than I anticipated too. My previous highest output on pump was 649awhp, and we slaughtered that yesterday at 714awhp, with even LESS boost than previously used before. Aside from a couple pesky headaches with my AEM methanol injection kit, which we learned just doesn’t like to cooperate on Mondays, we didn’t really run into any considerable issues at all. Everything went really smooth for the most part.

A couple weeks back, Josh (Turtle!) and I swapped in some new coilovers and got the suspension tuned and corner-weighted at Big Bear Tire. Very happy I was able to get that done too... Thanks Josh!

8117 <-- Dyno Graph

Regards
JR

Prince Valiant
02-12-2013, 11:11 PM
awesome!

Yooformula
02-12-2013, 11:12 PM
congrats!

WhatsADSM
02-12-2013, 11:17 PM
Looks good!

LIL EVO
02-12-2013, 11:39 PM
Dammit I woulda been there had I known. :(

awsomeears
02-12-2013, 11:41 PM
Your transmission will have nightmares tonight :)

twicks69
02-13-2013, 03:11 AM
Your transmission will have nightmares tonight :)

It better not.... We had worries of this when I put it togetheer, as the previous shop said they heard really scary noises, then they went quiet for us on the street and Dyno, no problems.
Tim Zimmer - TMZ Performance
Sent from Evo Phone via Tapatalk2

michelle
02-13-2013, 05:49 AM
Awesome!

blackmage
02-13-2013, 07:04 AM
Sick man, just sick. Awesome job!

JRink
02-13-2013, 08:29 AM
Here's a link to the dyno pull... I forgot to keep the camera going to show the dyno monitor afterwards, but.. eh.

http://www.youtube.com/watch?v=3nArEyGOPSc&feature=youtu.be

JR

rcutclif
02-13-2013, 08:41 AM
that's impressive. I have to admit, you don't see many of these at all. I thought it was going to be another 4g63 when I saw the post title. Good work. Looks like you have to update your sig ;)

STANMAN
02-13-2013, 08:43 AM
Jesse, your car has always been, and will always be, sick as hell. Good to hear you're happy, and have a great summer driving it. Hope to see it around!!!

73MACH
02-13-2013, 09:56 AM
thats badazz!

Prince Valiant
02-13-2013, 12:14 PM
That's got to be some of the highest power outputs for one of these things...what's the "record" for one of these things? Any plans to take it to the track?

JRink
02-13-2013, 10:32 PM
Video taken by Jeff of LMT of the 714awhp pump gas run...

Feb 11, 2013 4:23pm | Facebook (http://www.facebook.com/photo.php?v=3846570501870&set=vb.154651587891764&type=2&theater)

JR

spooln30
02-14-2013, 12:43 AM
Wow nice numbers. It's cool to see there are guys like you building these cars. They are getting scarce out there especially the Stealths. Btw you have one of the cleanest engine bays I've seen in your platform. I like how you have your turbo intakes but I would make a heat shield box for them then make a cold air feed to the box.

spooln30
02-14-2013, 12:49 AM
Have you ever weighed that beast? Its gotta be close to 4000lbs.

JRink
02-14-2013, 07:46 AM
Have you ever weighed that beast? Its gotta be close to 4000lbs.

Weighed 3 weeks aago at Big Bear Tire. 3625 without me.

I have a cold air intake for the filter via the hood... the ducting runs straight over the filters.

JR

*SNOOP*
02-14-2013, 08:39 AM
Nice!! If you street race we could make alot of money!! hehehehehehe

WilliamZ
02-16-2013, 08:19 PM
Amazing as usual!