djbuschke
04-04-2012, 08:02 AM
SOLD THE HEADERS, AND THE ELBOW... STILL HAVE THE MSD BOX
All prices are shipped, all items are as shown (except headers will not come with A.I.R. tubes or oxygen sensors)
I can also take paypal, thanks! - djbuschke@hotmail.com
Pick-up of items is welcome.
-----------------------------------------------
LT1 polished Intake elbow - $45 I can't tell if it's ceramic coated, chrome, or Polished aluminum, my guess is that it's pol. aluminum. Came off a '93 may fit other years, see photos.
MSD 6A ignition box. $90 comes as shown, the model # is : 6200
BBK shortie headers and Y-Pipe for LT1 - $220 - I believe these are for a 1993, but if you aren't using the A.I.R. inlets then it shouldn't matter, just plug them with a threaded fitting and go. the Y-pipe is supposed to be for a 93-95 I think, with the single cat, configuration... again, if you aren't using cat(s) then it shouldn't matter, could use from 93 - 97 (see photos) The story behind the headers is that the car was being worked on, and the driver side header was installed, the y pipe and passenger header were in the cabin of the vehicle, and then the project halted, and the vehicle sat for a few years in behind a house. so the driver header has some surface rust, while the passenger header and y pipe are still shiny as the day they were bought. See photos, the y pipe still has the stickers on it, and the other photo you can see the inside of the tubes, they have no soot and are brand new. your choice if you want to use them as is, or media blast them and recoat with something else, or have the driver side re-chromed.
http://i1261.photobucket.com/albums/ii591/djbuschke/parts/IMAG1439.jpg
http://i1261.photobucket.com/albums/ii591/djbuschke/parts/IMAG1438.jpg
All prices are shipped, all items are as shown (except headers will not come with A.I.R. tubes or oxygen sensors)
I can also take paypal, thanks! - djbuschke@hotmail.com
Pick-up of items is welcome.
-----------------------------------------------
LT1 polished Intake elbow - $45 I can't tell if it's ceramic coated, chrome, or Polished aluminum, my guess is that it's pol. aluminum. Came off a '93 may fit other years, see photos.
MSD 6A ignition box. $90 comes as shown, the model # is : 6200
BBK shortie headers and Y-Pipe for LT1 - $220 - I believe these are for a 1993, but if you aren't using the A.I.R. inlets then it shouldn't matter, just plug them with a threaded fitting and go. the Y-pipe is supposed to be for a 93-95 I think, with the single cat, configuration... again, if you aren't using cat(s) then it shouldn't matter, could use from 93 - 97 (see photos) The story behind the headers is that the car was being worked on, and the driver side header was installed, the y pipe and passenger header were in the cabin of the vehicle, and then the project halted, and the vehicle sat for a few years in behind a house. so the driver header has some surface rust, while the passenger header and y pipe are still shiny as the day they were bought. See photos, the y pipe still has the stickers on it, and the other photo you can see the inside of the tubes, they have no soot and are brand new. your choice if you want to use them as is, or media blast them and recoat with something else, or have the driver side re-chromed.
http://i1261.photobucket.com/albums/ii591/djbuschke/parts/IMAG1439.jpg
http://i1261.photobucket.com/albums/ii591/djbuschke/parts/IMAG1438.jpg