PonyKiller87
09-29-2011, 10:34 AM
I bought this stuff from a guy on WSD a few years ago with the intent of building a 406 for my Iroc. Plans changed, don't need the stuff anymore. Below is what was in the add when I bought the stuff. $400 obo for all of it.
This cam was in my camaro in 2006. The best it ran was 11.17@121mph with a 406, afr "out of the box" 195 street heads, victor jr intake, 950 holley 10.5:1 compression ratio.
The cam is a retrofit hyd roller custom ground by comp cams. very good cam for the street or track. It would make a nice cam for NOS or a turbo with the 114 lobe seperation. The hyd lifters are also comp cams retrofit lifters. The rev kit was made by Air Flow Research.
Camshaft
Lift with 1.5 rockers .586 intake & exhaust
Duration @ .006 287 intake & exhaust
Duration @ .050 236 intake & exhaust
Lifters http://www.jegs.com/webapp/wcs/store...10002_33234_-1
Rev Kit http://www.airflowresearch.com/hydra_rev.php
This cam was in my camaro in 2006. The best it ran was 11.17@121mph with a 406, afr "out of the box" 195 street heads, victor jr intake, 950 holley 10.5:1 compression ratio.
The cam is a retrofit hyd roller custom ground by comp cams. very good cam for the street or track. It would make a nice cam for NOS or a turbo with the 114 lobe seperation. The hyd lifters are also comp cams retrofit lifters. The rev kit was made by Air Flow Research.
Camshaft
Lift with 1.5 rockers .586 intake & exhaust
Duration @ .006 287 intake & exhaust
Duration @ .050 236 intake & exhaust
Lifters http://www.jegs.com/webapp/wcs/store...10002_33234_-1
Rev Kit http://www.airflowresearch.com/hydra_rev.php