PDA

View Full Version : FS: Scoped AR-15



Wagonbacker9
07-28-2011, 06:14 PM
Sold off the lower, barrel, gas system, and forend.

Still for sale:
TacForce Drag Bag: $100
Harris 12-21" Bipod: $70
Upper with BCG: $250

http://i921.photobucket.com/albums/ad51/Wagonbacker9/AR15/gotowar.jpg

http://i921.photobucket.com/albums/ad51/Wagonbacker9/AR15/gettowar.jpg

fivonut
07-28-2011, 07:42 PM
Trade ya a Springfield Armory 1911A1 for the upper minus scope, rings, and bi-pod. I have two magazines, one 7 round that came with it and one Kimber 8 round.

BTW, this has been in my personal collection long before I starting my company. I can legally trade this FTF.

Wagonbacker9
07-28-2011, 07:47 PM
Which model? finish? grips? I assume its in .45?

fivonut
07-28-2011, 07:48 PM
Which model? finish? grips?

GI Spec

http://espolson.com/wp-content//PW9108LLarge.jpg

Wagonbacker9
07-28-2011, 07:56 PM
Finding sale prices on that from 550 all the way up to 800, I assume there are different version?

fivonut
07-28-2011, 08:05 PM
Finding sale prices on that from 550 all the way up to 800, I assume there are different version?

$500 range new is typical for the GI spec. Yes, they make variations. This one is basic, no frills.

http://www.google.com/products/catalog?q=Springfield+Armory+1911A1&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&hl=en&bav=on.2,or.r_gc.r_pw.&biw=1252&bih=609&ie=UTF-8&tbm=shop&cid=6661314665758076674&sa=X&ei=6gYyTrL6LIevsQLYu8ijCw&ved=0CE8Q8wIwAQ

Wagonbacker9
07-28-2011, 08:09 PM
$500 range new is typical for the GI spec. Yes, they make variations. This one is basic, no frills.

http://www.google.com/products/catalog?q=Springfield+Armory+1911A1&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&hl=en&bav=on.2,or.r_gc.r_pw.&biw=1252&bih=609&ie=UTF-8&tbm=shop&cid=6661314665758076674&sa=X&ei=6gYyTrL6LIevsQLYu8ijCw&ved=0CE8Q8wIwAQ

That being the case, you're probably aware that you're offering me quite a bit less than I have into my upper...

fivonut
07-28-2011, 08:15 PM
That being the case, you're probably aware that you're offering me quite a bit less than I have into my upper...

I'm going off of what it would cost me to duplicate it.

Wagonbacker9
07-28-2011, 08:17 PM
I'm going off of what it would cost me to duplicate it.

and are you using the same valuing system for the item offered for trade?

fivonut
07-28-2011, 08:22 PM
and are you using the same valuing system for the item offered for trade?

The only thing I can't account for is the side charger conversion. But my cost on the parts list matches my cost on a brand new GI Spec 1911A1 within $10

Wagonbacker9
07-28-2011, 08:30 PM
Must be nice to get dealer cost... so I don't doubt thats true, but fair market on the upper would be $650ish as a run of the mill 20" varmint upper with standard FA/shell deflector/trapdoor upper and a plastic forend. The carbon forend wasn't cheap and had to be custom made to fit over the bull barrel, and the MM upper costs about double what a regular YHM A2 upper receiver costs. The side charger conversion was actually only $30 plus shipping which I thought was a steal. I guess what I'm saying is its not worth trading off to an entry level parkerized 1911.. I know I'm a cheap bastard, but I don't think I'm off base here in saying that your offer is below value, and its not like I need a 1911 to save my dying grandmother.

fivonut
07-28-2011, 08:46 PM
Understandable. I'm finding this to be one of the drawbacks to getting dealer pricing. What looks like an equal trade on paper to me is way off for someone having to pay retail. I've been contemplating upgrading my 1911 and I have a lower receiver sitting around waiting for me to build a 6.8 upper for it. I figured if we could work a deal this would allow me to get some use out of it in the mean time. Good luck with the sale, damn fine rifle you've got there!!!


Must be nice to get dealer cost... so I don't doubt thats true, but fair market on the upper would be $650ish as a run of the mill 20" varmint upper with standard FA/shell deflector/trapdoor upper and a plastic forend. The carbon forend wasn't cheap and had to be custom made to fit over the bull barrel, and the MM upper costs about double what a regular YHM A2 upper receiver costs. The side charger conversion was actually only $30 plus shipping which I thought was a steal. I guess what I'm saying is its not worth trading off to an entry level parkerized 1911.. I know I'm a cheap bastard, but I don't think I'm off base here in saying that your offer is below value, and its not like I need a 1911 to save my dying grandmother.

-stew-
07-28-2011, 08:58 PM
What ranger were those sight in groups shop at?

Wagonbacker9
07-28-2011, 09:00 PM
I'm guessing I would under-value the cost of IT support as well, since it is what I trade in every day, so, next time I'm looking to buy, I'll definitely look in your direction, given I probably could have shaved about $100 off my build cost on this thing.. and that was already hunting and waiting for deals.

Wagonbacker9
07-28-2011, 09:03 PM
What ranger were those sight in groups shop at?

I paced off 100 yards (aprox) once I got it close, but, that was the weekend of that late freak snow, and I was shooting off the bipod. At some point I need to bench test it to see what it will really do vs what I was doing with it. This is my first rifle, and the 2nd one I've shot, so in better hands it should be capable of much better than that.

edit: also just noticed the hit on the lower left of the right target, that is not part of the group. I had 2 of the 4 target sheets up, and was pretty far off when I started.

xFullThrottlex
07-28-2011, 09:13 PM
so badass too bad you didnt have a motorcycle in your trade list!!!

Wagonbacker9
07-28-2011, 09:15 PM
so badass too bad you didnt have a motorcycle in your trade list!!!

I'm listening. must have 4 cylenders or be water cooled.

350-Z28
07-29-2011, 07:20 PM
Too bad my beater F150 isnt worth $1400. I wouldnt mind an AR-15 but I think I'd go more towards the 16" barrel since I have the AR-10 for distance shots.

GLWS

Also your GTO needs turbos, didnt see that listed so there's an idea =P

Wagonbacker9
07-29-2011, 08:15 PM
I've had a turbo car, so if FI happens, it'll likely be of the belt driven variety. I've seen a couple TT cars that were NASTY though.

Trying to get cash and your F150 had occured to me...

I'd sell it without the barrel.. just sayin. I think I could get $200 out of the barrel/gas system, and I do have the wrench for the barrel nut/forend. It would suck if you had to reindex the barrel nut though, because there is a hole drilled for the swivel stud.

Wagonbacker9
07-31-2011, 04:35 PM
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=244485899

GTSLOW
07-31-2011, 06:28 PM
Trade on LS1gto for a nice set of kooks LT's or something? The stepped sig series are very nice I hear.

Wagonbacker9
07-31-2011, 06:32 PM
Trade on LS1gto for a nice set of kooks LT's or something? The stepped sig series are very nice I hear.

I've got shorties, and haven't hit 100 posts over there.

Car parts are the bottom of the list for stuff I want, mostly I'd do that just to get a deal done and something I'll get more use out of plus cash.

Wagonbacker9
08-02-2011, 07:34 PM
buy me. I'm willing to negociate on price.

Wagonbacker9
08-31-2011, 10:11 PM
up.

Offers?

Anybody?

Wagonbacker9
09-13-2011, 08:20 PM
Price dropped on gunbroker

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=251155411

Wagonbacker9
09-16-2011, 09:29 PM
Lower, Upper, forend, and barrel sold.

Still taking offers on TacForce case and bipod.