PDA

View Full Version : wtb chevy parts....



shawn
12-09-2010, 09:54 AM
lookin to buy 700r4 trans linkage for column shift, v-belt set-up(pulleys and brackets). for 350 chvy.350 exhaust manifolds with the exhaust dump at the back....more to come...thanks

PonyKiller87
12-09-2010, 11:11 AM
I have a march aluminum underdrive pully setup. Its all still on the car now, but I'm switching out to a serp setup. It uses a serp style belt around the crank, water pump and alt, and a reg v belt to hit the power steering. and I think there is another grove for a v belt to hit a/c if you have it.

I would be willing to let it all go for $150 obo. (by all I mean the 3 pullies, brackets and the power steering pump with pully and bracket attached.

Ricky Bobby
12-09-2010, 01:40 PM
if he dont want it i would be interested for my 406 in my monte should be reg style water pump right ??

PonyKiller87
12-09-2010, 01:45 PM
Yup, regular rotation water pump, and no idler or tensioner pully, just pull it all tight and tighten the bracket bolts.

Ricky Bobby
12-09-2010, 04:30 PM
k lmk if he dont snag it it would look nice in the front of my 406 instead of all the old style crap

shawn
12-09-2010, 07:17 PM
will let u kno tomorrow

PonyKiller87
12-09-2010, 07:44 PM
Sounds good, I will be in the garage most of the day sat if you want to come look at them. Probably take about 20 min to take them off the motor.

Ricky Bobby
12-10-2010, 02:29 PM
way off topic shawn i see in ur sig that u have a 03 windstar i guess there is a recall on them about the rear axle breaking friend has hauled about 10 99-00 ones with snapped rear axles, i believe the 03's are on there also

http://i4.photobucket.com/albums/y114/4dobermansrus/IMG_1507.jpg

PonyKiller87
12-10-2010, 03:00 PM
Damn, that would ruin your day in a hurry, lol.

shawn
12-10-2010, 03:52 PM
thhe deal on the pully set up im going to have to pass on. my buddy really doesnt want alumn, pullys. why idk...so ricky bobby their urs for the takin..also thanks for the info on the rear axle....about to get more information on this...

PonyKiller87
12-10-2010, 03:57 PM
No problem. If your just looking for steel your best bet is going to be hit the junk yard and grab a complete setup. I know Al's has several trucks, g body and f bodys that have motors with all the brackets and pullies on them.

Ricky, if you still want them, shoot me a PM and we can figure something out.