I Want !!

[2006wrxtr]

http://s844.photobucket.com/albums/ab7/92Notch351w/92%20Notch/?albumview=slideshow

[Firefighter Z]

Hot Link FAIL!

[Nix]

I want the cobra r wheels. I had some 17's on my 95 Grand Marquis when I had it.

I wouldn't mind finding another set for my stang. :thumbsup

[GHOSST]

Not impressed.

[DurtyKurty]

Meh.... it makes baby jesus cry.

[0TransAm0]

whats so "special" about it??

[2006wrxtr]

1992 coupe. It has a 351w with mildly worked Edelbrock RPM heads and intake. It's got a very healthy cam, but it's streetable, with a well tuned Holly 750HP. Compression is about 10:1, forged TRW pistons with shot peened rods and heat treated crank. It also has long tube headers, off road H-pipe and MAC mufflers. HP is believed to be in the 400+ range. No dyno sheets, but the combo is a good one.

The transmission is a Tremec 3550. It has a Centerforce clutch setup, FMS driveshaft, and a new 8.8 with 3.73's.
The brakes are the Cobra 2300k kit, with the real Cobra R wheels. It's got BBK cc plates, Bilstein struts and shocks, poly bushings, SN-95 front control arms, BBK rear control arms, and Kenny Brown springs.
The body is in good shape. It was purchased in Tennessee, and since I've moved north, it's been in a heated garage. No snow, no salt, no rust. The paint is ok, but not show quality. It's got a 4" cowl by Cervini.
The interior is nice. New black carpet, new black headliner, black leather seats from a SN-95. Two A-pillar Autometer gauges and the usual pod mounted tach, only my tach doesn't vibrate and wiggle into a blur.
All the work done to the car was clean and right. The pictures may not show all the flaws in the paint, but the quality of the work shows up plainly.



http://i163.photobucket.com/albums/t297/mike93lx/P10100502.jpg

http://i163.photobucket.com/albums/t297/mike93lx/P1010056.jpg

http://i163.photobucket.com/albums/t297/mike93lx/P1010054.jpg

[xxsn0blindxx]

So you posted a thread about your car with the subject "I want it !!"?

It does look really nice, but I will never understand converting an EFI car to carb.

[95mustang302]

maybe I don't get it, its just a notch with a 351w, nothing exotic...

[2006wrxtr]

So you posted a thread about your car with the subject "I want it !!"?

Not mine but hoping I can make it mine.

It does look really nice, but I will never understand converting an EFI car to carb.

I like a carb grew up working on them and am more at ease tuning one.


maybe I don't get it, its just a notch with a 351w, nothing exotic...

I think it is a great foundation to start with. I can drive it the way it is for a year or two and have a car that is a blast to drive. Meanwhile I will be putting together a stroker 408 with a ton of power.

Or just throw a kit on it and run 10's all day long..

[0TransAm0]

So you posted a thread about your car with the subject "I want it !!"?

:rolf:rolf

umm if its YOUR car i think you have it??? whats the point of this thred??

[2006wrxtr]

:rolf:rolf

umm if its YOUR car i think you have it??? whats the point of this thred??

It isn't mine, I am trying to work a deal on it...

[0TransAm0]

It isn't mine, I am trying to work a deal on it...

ah.. well that makes a little more sense then.. good luck with the deal..

[hrsp]

good luck with it!! d you know the owner or something?

[rally_scort]

build one instead...the car isnt even that clean :rolleyes:

[hrsp]

well did ya get it?