Videos of some BCMers at GLD today

[WhatsADSM]

Bunch of fast BCMers showed up at GLD tonight. Here are some videos I got of them. Click the HD links I provided to watch them in 1080P =]

Jim (Dr. Buick's 2nd run). Baby got off the throttle twice. :goof
be5Xmp2ECIs&hd=1
http://www.youtube.com/watch?v=be5Xmp2ECIs&hd=1



Ron (juicedimpss's last run)
G1H6A0Z8DRk&hd=1
http://www.youtube.com/watch?v=G1H6A0Z8DRk&hd=1




Larry (forgot BCM SN) and Andy (Boss LX) last runs. Larry had some issues getting it into 2nd, Andy had some issue at the very end of the track.
5BJYneu49os&hd=1
http://www.youtube.com/watch?v=5BJYneu49os&hd=1




Jim (Dr. Buick's last run)
Vj8uFqa7F2M&hd=1
http://www.youtube.com/watch?v=Vj8uFqa7F2M&hd=1

[Crawlin]

Looks like alot of fun! Pissed I missed it with work schedule, but damn you guys are all flying!

Hope Andy's car is alrigtht!

[SmokinRAM114]

Andys car was only tire smoke. Tires are rubbing front and rear of the rear quarters on the big end! Someone said he oild the track down, but he actually got SENT DOWN a oiled down track! The car that went down before him left oil all the way down the track n then up the return road also! Talk about sketchy, and some what lucky!

[Crawlin]

OK good! That's good news then.

Definitely sucks about the oil down from previous car. That could have gotten very out of hand.

[jbiscuit]

looks like a lot of fun. Great night for it! Hope everyone's cars ran as well as they hoped

[juicedimpss]

nice vids murray.
was a good time out there,been a long time since we had the BU out,and i think it payed off.
RTCTTF

[Dr.Buick]

nice vids murray.
was a good time out there,been a long time since we had the BU out,and i think it payed off.
RTCTTF
mother fuckers :rolf you forgot some

[juicedimpss]

check out the getaway sticks on Chip...
sexy.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/mZUPt67X49s&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/mZUPt67X49s&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[WhatsADSM]

Ron like I mentioned at the track. It was awesome to see the Bu out again, and nice to see you get a chance to drive your own stuff for once... Not to mention the fact that the car was working great!

Ron, Andy, Jim, I clipped your launches and put them in slow motion so that you can check out the chassis and suspension movement so you can get an idea of what it is doing. Jim after looking at yours it looks like the car can take a faster ramp, we just need to control the front end a little more right off the brake.

Jim launch
oLBzcw1_wec&hd=1
http://www.youtube.com/watch?v=oLBzcw1_wec&hd=1


Andy launch
Fl0M6HSlwSk&hd=1
http://www.youtube.com/watch?v=Fl0M6HSlwSk&hd=1



Ron launch
OZGXJftw10E&hd=1
http://www.youtube.com/watch?v=OZGXJftw10E&hd=1

[juicedimpss]

awesome slow-mo murray. how can i slow them down like that from the flip hd?

[SmokinRAM114]

Slow mo is sweet!

[BOSS LX]

Thanks for the vids, we had a blast!

[WhatsADSM]

awesome slow-mo murray. how can i slow them down like that from the flip hd?

If you want you can just send me the video or I can probably DL the video and then slow mo a certain section for you and give it back.

Otherwise, when I get a chance I'll have to walk you through it. As video editting can be kind of annoying to say the least.

Basic premise is this:

I use VirtualDub to manually modify the frame rate as well as clip only the part of the video that you want (the launch).

So the act of slowing the framerate down is the what does the slow mo. Say your flip shoots 60 fps, that means it will take 60 little pictures per second. When you play that back normally every 1 sixtyth of a second it will change to a new picture/frame. So when I change the framerate like I did to 5fps, that means it will keep all of the original frames but instead of changing every 60th of a second it will change every 5th of a second and so you can see each frame with the human eye for a longer period.

Okay so if you use virtual dub and basically just set the framerate down, you are done. The hard part sometimes can be getting VirtualDub to recognize the video. We may need to download some codec engines and even use AviSynth to act as a frame server.. and it gets kind of complicated so I'd be better off just showing you how on a PC... or maybe recording a webinar or something.

Once you get everything into something like VirtualDub (or AviSynth) you can do some really cool stuff and you can see every single frame, rotate the video, do video overlays, filters, etc. etc.

[juicedimpss]

so i pretty much need a different editing software than what came with it.
lol

[Crawlin]

spend that money! haha.

business write off for "tuning purposes"

SERIOUSLY

[scaleracer]

Nice vids looks like it was a good time!

[WhatsADSM]

so i pretty much need a different editing software than what came with it.
lol


spend that money! haha.

business write off for "tuning purposes"

SERIOUSLY

The tools I talked about / I am using:
VirtualDub (http://virtualdub.sourceforge.net/) is free
AviSynth (http://sourceforge.net/projects/avisynth2/) is free
ffdshow (http://sourceforge.net/projects/ffdshow/) codec suite is free

:):):) :thumbsup