Cryptic
04-22-2010, 07:28 PM
ATI Super Damper
Part# 917264 (http://www.atiracing.com/products/dampers/charts/damserp.htm)
SFI 18.1 Approved
7 1/2" Aluminum 6 Serp Grv for LS1 F Body w/ AC pulley
It was pressed onto motor but never run. Only on the motor long enough to realize my mistake. I have original box and all.
I purchased wrong one for the accessory drive kit I bought. (This one (http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=199032)) The balancer is farther from the block by about 3/4" than the rest of the accessories.
I'm willing to lose $50 bucks on what I paid for it (new). My mistake, your gain.
$462 - $50 = $412
Call it $410 and it's yours.
Giving BCM first go at this before I take it to LS1tech.
http://lh4.ggpht.com/_5Bdw0bCKJkE/S6q4myO6YEI/AAAAAAAAAdg/oFdtapUQwqg/s1152/IMG_5460.JPG
Part# 917264 (http://www.atiracing.com/products/dampers/charts/damserp.htm)
SFI 18.1 Approved
7 1/2" Aluminum 6 Serp Grv for LS1 F Body w/ AC pulley
It was pressed onto motor but never run. Only on the motor long enough to realize my mistake. I have original box and all.
I purchased wrong one for the accessory drive kit I bought. (This one (http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=199032)) The balancer is farther from the block by about 3/4" than the rest of the accessories.
I'm willing to lose $50 bucks on what I paid for it (new). My mistake, your gain.
$462 - $50 = $412
Call it $410 and it's yours.
Giving BCM first go at this before I take it to LS1tech.
http://lh4.ggpht.com/_5Bdw0bCKJkE/S6q4myO6YEI/AAAAAAAAAdg/oFdtapUQwqg/s1152/IMG_5460.JPG