Need a piece of GLASS cut.....

[Car Guy]

I need to replace a piece of glass for the coffee table which was broken during the move. Please post up if you know of a good and reasonable glass shop that is somewhat close to me on Howell Ave & Ryan Rd. I am afraid to know how much this 'oops' will cost......


~Justin :thumbsup

[Reverend Cooper]

i just went to a auto glass place here in town for tempered cut glass shelves for my bar cabinets,and they were really not that expensive

[Car Guy]

i just went to a auto glass place here in town for tempered cut glass shelves for my bar cabinets,and they were really not that expensive

That is good to hear. This piece of glass does not need to be tempered but is oval in shape, about 3.5' x 2.5'.....

[Reverend Cooper]

should be cheap,if they temper it it will be stroger and less likely to break,just a s suggestion

[stenchmiester]

Justin ace hardware on howell and forest hill

[SSDude]

Airport Glass & Plastic Ltd Inc
3555 E Layton Ave Cudahy, WI 53110 (414) 744-6611

Layton Glass & Mirrors Inc
6700 W Layton Ave, Milwaukee, WI 53220 » Map (414) 282-7120

Les's Glass Service Inc
10111 W Forest Home Ave, Hales Corners, WI 53130 (414) 529-1114

(Wholesaler?)
Kaliedoscopic Glass Llc
8550 S Shepard Ave Oak Creek, WI 53154 (414) 571-1414

Touch Of Glass Llc
5122 3 Mile Rd, Racine, WI 53406 (262) 635-0517

Alliance Glass & Metal Inc
8505 Hollander Dr, Franksville, WI 53126 (262) 884-8700

[xxsn0blindxx]

She can help

http://www.nakidness.com/images/file/mediums/stiff_nipples1.jpg

[DurtyKurty]

I built a custom mirror/cabinet for my bathroom and had 5 glass shelves and a mirror cut for it. I told them the thickness that I wanted for the glass, had the edges rounded and polished and the edges on the mirror beveled. All I had to do was a phone call and I picked it up the next day. I don't remember the price, but I know it was reasonable. I'm certain they would have tempered glass also.

Milwaukee Plate Glass Company
11233 W Greenfield Ave
Milwaukee, WI 53214

[Car Guy]

The only aspect I am curious about is how they will know the exact shape of the oval-ish piece needed.....

[SSDude]

Might want to make a cardboard template for them or take them the table. A length and width might not get the exact size.