PDA

View Full Version : FS LS6 block and cranks, No good for rebuild



BAD LS1
11-02-2009, 11:19 AM
I have the original LS6 block that came from my 01' yet. It hs a cracked sleeve and water jacket in the #7 cylinder from a stock piston breaking. It could be cleaned up and used as a cofee table base, its been sitting since 05 so the liners are pretty rusty.

$50 takes it, it weighs about 110 lbs, so it might bring more than than in breakage alluminum, im not sure.

Also have a pair of 6.0L cranks too, again pretty rusty, one is cracked and the other was new but the bearing journals were nicked, that one still has the 24x reluctor on it.

FREE