View Full Version : Turbo 408w?
HY35F2T
09-27-2009, 01:37 PM
Whats a decent build up youve had in mind or seen of a turbo 408w or any other size 351w based motor, something that makes 7-900 whp.
FourEyedFord
10-01-2009, 02:14 PM
Don't do it!!! ;)
My car has a 400ci windsor in it with an 88mm and it is making good power.
Motor:
9.5" Dart Block
4.130" Bore
3.75" Stroke 4340 Eagle Crank
6.200" 4340 Eagle H-Beam Rods
Ross Custom Pistons 8.5:1 Compression
Brodix Track 1X 225 Heads Ported-(Get yourself a set of TFS High Ports or R's)
Custom Solid Roller Cam By Steve Petty
Super Victor Intake
Turbo:
Custom 88mm by Supernatural Turbo
700-900whp is kind of a wide range, but honestly is very achieveable with a much simpler non-intercooled blower setup like a Vortech YSi. Adamsy87 on here is makeing well north of 600whp with a pump gas tuneup on a 418w, stock block, Victor Jr. heads, Hydraulic roller cam, and a vortech YSi.
HY35F2T
10-04-2009, 03:37 PM
hmmmmmm
Stangman98
10-04-2009, 04:57 PM
I would recommend a dart block if you want 800 or 900 RWHP
Sprayaway Fox
10-05-2009, 04:51 PM
Windsor block max is around 650HP...At least from people that run stock blockers that I hear about on Corral.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.