PDA

View Full Version : Hot Tub Repair??


modmachz
07-26-2009, 08:35 PM
Anybody Repair Hot Tubs? I have a sundance I Bought From Wolf years ago and all I had was Problems with the tub as well as wolf pools..


Give me a number or call me @ 414-852-3534
SSLEVO
07-26-2009, 10:51 PM
Whats wrong with it? I rebuilt one a couple years ago, maybe i can point you in the right direction.
Smokey1226
07-27-2009, 04:05 PM
http://www.tetongravity.com/usergalleries/albums/userpics/normal_out_cold0288.jpg

lololol
modmachz
07-27-2009, 07:13 PM
you fucking douch bag chad
Smokey1226
07-27-2009, 07:16 PM
if i had more time, i was going to photoshop your head on the pic....BWAHWHHAW
modmachz
07-27-2009, 09:26 PM
go ahead you stinking freak
SSLEVO
07-28-2009, 07:43 AM
lol, you can't even keep your own thread on topic. What is wrong with the thing?
modmachz
07-28-2009, 09:52 PM
Tub was drained for 2 mo. To Re stain Outside cabinets, Filled it saturday and everything was fine, than sunday I was going to use it and the heater is clicking off and on the command center is reading 104 Degrees and climbs fast than goes into a over heat mode, than command center goes blank.

Pumps worked in two speeds as they should, the air works, lights in tub works..

Called wolf pools and they are the biggest fuckin in expierienced pieces of shit around!!! DO NOT EVER BUY ANYTHING FROM THEM FUCKS.. After 1 month the tub took out the main pump that they wanted to charge me for I said wtf?
Took out flow valves, circ pump etc. etc.. Wolf wanted 137.00 too come and guess whats wrong for the first hour and than 137.00 ther after till problem is figured out.. I told them to jam it in there ass..

I got a place from west bend comming out thursday and get this 85.00 to come out and figure it out whether its 5 minutes or 5 hours.. and he is also a authorized sundance dealer.. They seem to think its the main board in which it is very expensive, I will see thursday. DID I SAY FUCK WOLF POOLS!!!!!!!
SSLEVO
07-28-2009, 10:31 PM
How big of a tub is it? We rebuilt a 8x8, maybe 8-10 person tub. It needed a new controller/heater and pumps. We got a 5.5kw 220 controller/heater on ebay for about $300, so i wouldn't pay any more than that unless the tub has a bunch of fancy features controlled by the "main board."
modmachz
07-30-2009, 06:34 PM
All fixed 29.00 heat sensor..

Hats off to a-1 pool and spa in west bend...

Again fuck wolf pools!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1