PDA

View Full Version : LS1 stuff....



Crawlin
04-05-2009, 08:47 AM
6.0L block - $300 w/ new cam bearings to install

6.0L stock crank - $100

317 heads for 6.0L - $100
need assembly and cleaned in my opinion

02-04 Z06 cam - $125

Wiseco 4.0" bore pistons(stock bore) - $200
These have the -25cc dish for low compression. Have pins. Would replace locks and need new rings anyways.

Eagle 6.125 Rods w/ ARP bolts - $350

Gasket setup for this engine. - $250
This includes all the gaskets you need. It is not the GM kit or the TSP kit. I pieced it together with the parts that are better, including the new 5-layer GM MLS headgaskets that have been working well on the F.I. setups. Also includes the oil galley plugs and intake gaskets(orange ribbed ones)

Beagle
04-05-2009, 12:50 PM
I cant say that im surprised Chris......... Bump.

*SNOOP*
04-05-2009, 01:23 PM
Why the big sale??

Crawlin
04-05-2009, 03:18 PM
Bored as usual...

Haven't touched it. Rather just stick a SBC on spray in it instead of trying to be creative.

jbiscuit
04-05-2009, 05:42 PM
wow....you really are going SBC on spray? I suppose....easier

sloLs1
04-05-2009, 07:41 PM
i want the crank dampner!

Crawlin
04-06-2009, 12:59 PM
Mixed in with everything there is also a brand new double roller timing chain from JP Performance

I want to wait a week to see if I can sell the whole package Jake and then I'll get back with you.

sloLs1
04-06-2009, 01:48 PM
alrighty, id be intrested in the timing chain too!

scottie K
04-07-2009, 01:31 AM
i know of a nice 468 for cheap

Crawlin
04-07-2009, 07:45 AM
Hey Jake...

Looks like I'll be splitting this stuff up. So let me know when you want the pulley, bolt, and timing chain. Can even bring it in to work and have Ron bring it home and you can meet up with him if you need it really quickly?

Chris

juicedimpss
04-07-2009, 08:32 AM
i know of a nice 468 for cheap

big blocks are slow.

Bobby72GTO
04-07-2009, 10:41 AM
6.0L block - $300 w/ new cam bearings to install

6.0L stock crank - $100

317 heads for 6.0L - $100
need assembly and cleaned in my opinion

02-04 Z06 cam - $125

Wiseco 4.0" bore pistons(stock bore) - $200
These have the -25cc dish for low compression. Have pins. Would replace locks and need new rings anyways.

Eagle 6.125 Rods w/ ARP bolts - $350

Powerforce SFI LS1 dampner - $150
BRAND NEW! Normally $175. Will also include brand new ARP crank bolt

Gasket setup for this engine. - $250
This includes all the gaskets you need. It is not the GM kit or the TSP kit. I pieced it together with the parts that are better, including the new 5-layer GM MLS headgaskets that have been working well on the F.I. setups. Also includes the oil galley plugs and intake gaskets(orange ribbed ones)

JP Performance Double Roller Timing Chain - $75
BRAND NEW


If you want it all - $1200 Prefer to sell it that way.

Just add your new rings, lifters, main/rod bearings, and intake and get the stuff cleaned up and you'd have a pretty good longblock

Hell if you want it in a G-body I'll even include the motor and mid plates, haha. Those weren't cheap.

Chris tell Lewo, he is looking for a 6.0L for his Miata project.

sloLs1
04-07-2009, 12:15 PM
Hey Jake...

Looks like I'll be splitting this stuff up. So let me know when you want the pulley, bolt, and timing chain. Can even bring it in to work and have Ron bring it home and you can meet up with him if you need it really quickly?

Chris

pm sent

turbogarrett
04-08-2009, 05:35 PM
I need some 4" bore headgaskets if you want to seperate.

Knyghtmare
04-08-2009, 11:15 PM
I remember the first time I saw one of Chris's posts in the Classified called "LS1 stuff". LOL That was the beginning of a long road for me.

Crawlin
04-13-2009, 11:07 AM
Chris tell Lewo, he is looking for a 6.0L for his Miata project.

I don't have his number... please let him know

Jake, forgot to give you a call since I didn't get back till real late....

sloLs1
04-13-2009, 07:07 PM
when ever works for you... im outta town all week. it looks like the weekend would work.

Crawlin
04-28-2009, 08:06 AM
TTT

Jake, when are you available this week? I just got back into town yesterday and had to do some cleanup. anytime after 6pm is fine with me. could meet up tonight even or maybe even just give the parts to ron?

Crawlin
05-06-2009, 07:20 AM
TTT.

one last time before LS1tech