Powdercoating deal

[1320PNY]

Armour Coatings in Germantown. I met with the owner, Charlie, who gave me a walk through of the facility. We had a large frame put through bead blast, white primer, and safety yellow top coat. Charlie did us a huge favor, $80.

He said to go ahead and send "friends" his way as times are slowing down for him and he can squeeze the occasional project through. He is currently doing his own full rotisserie Camaro right now. He's a great guy and seems truly passionate about quality and vehicle projects.

So, I don't want to ruin this "in" for myself. If you have anything you want pushed through, please PM me and I'll set it up. I will continue to use Armour for my work related projects, so I need all references to me and my name professional.

He said he would put together a price sheet for basic stuff like suspension parts, motorcycle parts, snowmobile parts, etc and e-mail it to me. Once I get that I will post it up so you guys/gals can see if your project needs powder.

[Reverend Cooper]

excellent that is awesome

[GRAMPS SS]

he does do great work....he does all the work for a buddy of mine that restores Corvetts...deff woth the time to check him out if you already don't have a guy...

[badass88gt]

Shoot me a price for an ATV frame. Its already blasted, just needs powdercoating. Thanks-Dan

[srt4eh]

thats awesome...I can't wait to see the price sheet :)

[SSLEVO]

Sounds good, i may have some AL grill mesh i'd like to get re-coated black (4 pieces, one big and 3 small) and a 2'x2' hood vent from my evo, in black also. Some prices would be nice if you get to it.

[civic600]

i do powdercoating at generac power systems for a living. no offense but i could probably do it cheaper. ive been powdercoating for 8 years. ive done alot of parts for friends and myself. if anyone needs something done lmk. if you would rather go through that place no big deal. just thought i would throw that out there
jeremy

[shoooo32]

Wheels! How much to do wheels?

[lit666]

check on valve covers and upper intake lid powdercoated chrome. I know it's not chrome dipped but the finish looks like chrome.

[PonyKiller87]

Can you get me a price to do 8 aluminum wheels(16x8) completely gloss black?

[1320PNY]

This is the correspondence I received from Armour Coatings. They give these a guidelines until they see your specific items. They are in Germantown and we plan on bringing plenty of stuff from XACT (my workplace) over there in the next few months. If you want to drop them off in Menomonee Falls (for convenience) we will take them over with our stuff. If you want to go to Armour directly, Charlie (the owner) said he was happy to have you guys stop by and check the place out.

A-Arms Upper & Lower $45.00
Air Cleaner Covers 2 pc. $55.00
Alternator Housing $45.00+
Axle Housings Only:
Typical Passenger $225.00
Racing Short Style $235.00
Corvette Complete $325.00
Jaguar Complete $400.00
Blower Housing$225.00
Drive Snout $35.00
End Plates $30.00
Bolt Heads $2.00
Battery Box $25.00
Brakes:
Disc Rotor Not Drilled $60.00
Disc Rotor Drilled $90.00
Disc Back Plate $25.00
Calipers $60.00
Brake Drum $50.00
Drum Back Plate $35.00
Brackets – Small $8.00<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
and the list goes on and on, but this forum won't let me post more than 15000 characters.

Email:
Charliej@armourcoatings.com (Charliej@armourcoatings.com)
Telephone:
(262)502-1600
FAX:
(262)502-1616
Mail:
Armour Coatings Inc.
N113 W18950 Carnegie Dr.
Germantown, WI 53022

[nismodave]

So looks like they will powdercoat the hub part of you brake rotors? Is that 60-90 per rotor?

Also is that $60 for each caliper?

[1320PNY]

Any direct question, just e-mail Charlie. They quoted me $285 to bead blast and powdercoat my project. Dropped it off, picked it up the next day. I was billed $80.

It all depends on how difficult it is to blast the part and prepare the surface. Depending on what color you want, they may be running it that day. Charlie is really a great guy and totally reasonable.

I told him I was openening the "flood gate" tonight, so go ahead and e-mail away!

Thanks,

Shaun

[Poncho]

Daaaaamn. I want my new 18" meshies to have Gold/bronze spokes, guess I'll be giving them a call. Thanks for the heads up/good deal going for us!

[Holeshot]

Daaaaamn. I want my new 18" meshies to have Gold/bronze spokes, guess I'll be giving them a call. Thanks for the heads up/good deal going for us!

That would look awesome.:thumbsup

[SSLEVO]

That would look awesome.:thumbsup

Or more like an STI :thumbsup I'll have to shoot him an email About my grill mesh. Might be better off painting it.

[Exitspeed]

Hmmmm, thanks for the info. I' need to get some bike parts powder coated at some point in the near future.

[1320PNY]

6037

Hopefully you guys can download and read this attachment. This is the full list of general prices. As stated, take your stuff to Armour and they will do you justice.

Later,

Shaun