Dom87SS
03-01-2009, 04:04 PM
**all prices negotiable, will ship within US, need parts gone **
Please feel free to ask questions and make offers, i can get shipping quotes usually within a day. Please Pm, email, or post up if you would like more information.
doms87ss@yahoo.com
Holley Blue Fuel Pump - $120 (was 130+ tax & shipping new)
never wired, mounted, or run. was going to use 2 pumps, but decided to go with one bigger pump. i have the box in my basement all hardware, instructions, gaskets, etc that came with it are here.
These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi with an externally accessible pressure relief valve. They weigh only 3 lbs, and include a mounting bracket.
- Not for use with alcohol
- Preset to approximately 14 psi
- Flows 70 gph maintaining 9 psi line pressure
- Free-flow capacity of 110 gph
- Inlet Size: 3/8 in. NPT
- Outlet Size: 3/8 in. NPT
http://img204.imageshack.us/img204/795/dsc012427424312hl2.jpg
Edelbrock Victor Series Fuel Pump - $ 70 (was 100+ tax & shipping new)
used for mock up, has 5-10 min of run time on it. For a SBC, comes with new felpro gasket as well.
Edelbrock's High-Performance Street Fuel Pumps have 6-valves and a flow capacity of 110 gph. The unique valve design improves flow quantity and quality, and will support engines up to 600hp. High-volume, 3/8'' NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi. For gasoline or mixed fuels only. No Regulator required. Clockable lower housing can be rotated for inlet/outlet alignment.
http://img259.imageshack.us/img259/9768/dsc012437446750de4.jpg
Crower 288H torque beast cam - $35 - sbc, .444/.464 lift, 288/298 duration
http://img21.imageshack.us/img21/3756/img26568397738.jpg
Radiator - $25 - was in a SBC g-body, 3 core -
core dims - 2" thick, 17 1/16" tall, 26 3/8" wide
overall dims - 2 7/8" thick, 18 3/8" tall, 31 1/8" wide
http://img17.imageshack.us/img17/5559/img26548727352.jpg
Radiator - $10 - was in a SBC g-body, 2 core -
core dims - 1 13/16" thick, 16 13/16" tall, 28" wide
overall dims - 2 3/8" thick, 18 1/2" tall, 32 7/8" wide
http://img24.imageshack.us/img24/677/img26558744878.jpg
Oil Cooler - $15 - used, does not leak as far as i know
http://img24.imageshack.us/img24/2994/img26278444437.jpg
Trans Cooler - $15 - GM truck cooler, used, does not leak as far as i know
http://img6.imageshack.us/img6/4169/img26288462681.jpg
HEMI badges - new mopar part, $12ea, $20 for 2, or 90 for all 9
http://img8.imageshack.us/img8/287/img26478669029.jpg
http://img24.imageshack.us/img24/3668/img26488683821.jpg
http://img23.imageshack.us/img23/9605/img26508696641.jpg
Monte Carlo SS Bumper - $180 - Glasstek fiberglass replacement for 87-88 SS, 3lbs as is, has small imperfection on passenger side need a small patch, $220 new
http://img24.imageshack.us/img24/2594/img26183497034.jpg
http://img15.imageshack.us/img15/7499/img26193512036.jpg
http://img15.imageshack.us/img15/9279/img26203525716.jpg
http://img25.imageshack.us/img25/3632/img26173484654.jpg
http://img8.imageshack.us/img8/5352/img26223446990.jpg
Chome kit - $25 - used with some surface rust on air cleaners, water neck and breather, includes 14" air cleaner top and drop base, perimeter bolt valve covers, 2 breathers, a radiator cap, water neck, mr gasket and misc distributor weights and springs, new mr gasket timing pointer -
http://img5.imageshack.us/img5/2486/img26538711224.jpg
Dipstick - $1 - stock used for a th350
http://img21.imageshack.us/img21/463/img26428589412.jpg
Fender braces - $10 - misc under hood braces
http://img17.imageshack.us/img17/1454/img26458636159.jpg
Alternator - $15 - delco-remy used, stock replacrement on a 305 chevy, does not include pulley. Worked when pulled off my motor
http://img17.imageshack.us/img17/263/img26448620392.jpg
Alternator - $15 - delco-remy used, stock replacrement on a 305 chevy, Worked when pulled off the motor, includes mounting brackets
http://img18.imageshack.us/img18/8166/img26438604594.jpg
Upper control Arms - $75 - for a G-body, used, needs upper ball joints, comes with new energy suspension bushings -
http://img21.imageshack.us/img21/2465/img26358537067.jpg
Heat sheild - $10 - bolts to the floor of a g-body, above the cat, to prevent heat soak under the passenger
http://img24.imageshack.us/img24/7237/img26348520845.jpg
Oil Pan - $10 - SBC oil pan,driver side dipstick, media blasted clean
http://img6.imageshack.us/img6/7164/img26338507068.jpg
http://img21.imageshack.us/img21/1952/img26328492947.jpg
Flexplate - $10 - used, media blasted clean, no broken or chipped teeth, 168 tooth
http://img5.imageshack.us/img5/6711/img26308479034.jpg
Power steering pump - $10 - used and in working order when pulled off a SBC
http://img26.imageshack.us/img26/4708/img26378551717.jpg
Water pump - $5 - used and in working order when pulled off a SBC
http://img6.imageshack.us/img6/6291/img26398567831.jpg
pulleys - $5 - v-belt water pump (1 groove) and crank pullies (2 groove)
http://img17.imageshack.us/img17/4428/img26258414567.jpg
Please feel free to ask questions and make offers, i can get shipping quotes usually within a day. Please Pm, email, or post up if you would like more information.
doms87ss@yahoo.com
Holley Blue Fuel Pump - $120 (was 130+ tax & shipping new)
never wired, mounted, or run. was going to use 2 pumps, but decided to go with one bigger pump. i have the box in my basement all hardware, instructions, gaskets, etc that came with it are here.
These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi with an externally accessible pressure relief valve. They weigh only 3 lbs, and include a mounting bracket.
- Not for use with alcohol
- Preset to approximately 14 psi
- Flows 70 gph maintaining 9 psi line pressure
- Free-flow capacity of 110 gph
- Inlet Size: 3/8 in. NPT
- Outlet Size: 3/8 in. NPT
http://img204.imageshack.us/img204/795/dsc012427424312hl2.jpg
Edelbrock Victor Series Fuel Pump - $ 70 (was 100+ tax & shipping new)
used for mock up, has 5-10 min of run time on it. For a SBC, comes with new felpro gasket as well.
Edelbrock's High-Performance Street Fuel Pumps have 6-valves and a flow capacity of 110 gph. The unique valve design improves flow quantity and quality, and will support engines up to 600hp. High-volume, 3/8'' NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi. For gasoline or mixed fuels only. No Regulator required. Clockable lower housing can be rotated for inlet/outlet alignment.
http://img259.imageshack.us/img259/9768/dsc012437446750de4.jpg
Crower 288H torque beast cam - $35 - sbc, .444/.464 lift, 288/298 duration
http://img21.imageshack.us/img21/3756/img26568397738.jpg
Radiator - $25 - was in a SBC g-body, 3 core -
core dims - 2" thick, 17 1/16" tall, 26 3/8" wide
overall dims - 2 7/8" thick, 18 3/8" tall, 31 1/8" wide
http://img17.imageshack.us/img17/5559/img26548727352.jpg
Radiator - $10 - was in a SBC g-body, 2 core -
core dims - 1 13/16" thick, 16 13/16" tall, 28" wide
overall dims - 2 3/8" thick, 18 1/2" tall, 32 7/8" wide
http://img24.imageshack.us/img24/677/img26558744878.jpg
Oil Cooler - $15 - used, does not leak as far as i know
http://img24.imageshack.us/img24/2994/img26278444437.jpg
Trans Cooler - $15 - GM truck cooler, used, does not leak as far as i know
http://img6.imageshack.us/img6/4169/img26288462681.jpg
HEMI badges - new mopar part, $12ea, $20 for 2, or 90 for all 9
http://img8.imageshack.us/img8/287/img26478669029.jpg
http://img24.imageshack.us/img24/3668/img26488683821.jpg
http://img23.imageshack.us/img23/9605/img26508696641.jpg
Monte Carlo SS Bumper - $180 - Glasstek fiberglass replacement for 87-88 SS, 3lbs as is, has small imperfection on passenger side need a small patch, $220 new
http://img24.imageshack.us/img24/2594/img26183497034.jpg
http://img15.imageshack.us/img15/7499/img26193512036.jpg
http://img15.imageshack.us/img15/9279/img26203525716.jpg
http://img25.imageshack.us/img25/3632/img26173484654.jpg
http://img8.imageshack.us/img8/5352/img26223446990.jpg
Chome kit - $25 - used with some surface rust on air cleaners, water neck and breather, includes 14" air cleaner top and drop base, perimeter bolt valve covers, 2 breathers, a radiator cap, water neck, mr gasket and misc distributor weights and springs, new mr gasket timing pointer -
http://img5.imageshack.us/img5/2486/img26538711224.jpg
Dipstick - $1 - stock used for a th350
http://img21.imageshack.us/img21/463/img26428589412.jpg
Fender braces - $10 - misc under hood braces
http://img17.imageshack.us/img17/1454/img26458636159.jpg
Alternator - $15 - delco-remy used, stock replacrement on a 305 chevy, does not include pulley. Worked when pulled off my motor
http://img17.imageshack.us/img17/263/img26448620392.jpg
Alternator - $15 - delco-remy used, stock replacrement on a 305 chevy, Worked when pulled off the motor, includes mounting brackets
http://img18.imageshack.us/img18/8166/img26438604594.jpg
Upper control Arms - $75 - for a G-body, used, needs upper ball joints, comes with new energy suspension bushings -
http://img21.imageshack.us/img21/2465/img26358537067.jpg
Heat sheild - $10 - bolts to the floor of a g-body, above the cat, to prevent heat soak under the passenger
http://img24.imageshack.us/img24/7237/img26348520845.jpg
Oil Pan - $10 - SBC oil pan,driver side dipstick, media blasted clean
http://img6.imageshack.us/img6/7164/img26338507068.jpg
http://img21.imageshack.us/img21/1952/img26328492947.jpg
Flexplate - $10 - used, media blasted clean, no broken or chipped teeth, 168 tooth
http://img5.imageshack.us/img5/6711/img26308479034.jpg
Power steering pump - $10 - used and in working order when pulled off a SBC
http://img26.imageshack.us/img26/4708/img26378551717.jpg
Water pump - $5 - used and in working order when pulled off a SBC
http://img6.imageshack.us/img6/6291/img26398567831.jpg
pulleys - $5 - v-belt water pump (1 groove) and crank pullies (2 groove)
http://img17.imageshack.us/img17/4428/img26258414567.jpg