wtb 110v mig welder

[88Nightmare]

just lookin for somethin cheap and simple to weld on sheet steel. anybody have something?

[Russ Jerome]

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100039229&N=10000003+10401013
These work great, in stock at Home depot. If you buy a cheaper
one from Harbor freight you will be disapointed.

[88Nightmare]

just curious.... what are the main differences from the home depot one and the harbor freight one? what kind of disappointment could I expect?

[Mr Twigbert]

Lit666 might have one.. They rep Champbell Hausfeld..

[pOrk]

Almost EVERYTHING from harbor freight is complete crap.

[Russ Jerome]

just curious.... what are the main differences from the home depot one and the harbor freight one? what kind of disappointment could I expect?

That link was of a Lincoln Electric welder, carried everywhere but Home depots always seam to stock them. You realy cant go wrong buying the cheapest Miller or Lincoln you can find, if you cant get there little welders to work then you cant weld. I have one of the $400 Lincolns here at home and I even set it up for aluminum welding.

I've welded for a long time so I can get those cheap HomoFreight ones and Northern tool ones to lay a decent bead but the planets need to be aligned, everything spotless ect. If you dont have a lot of experience welding a
the cheap ones are not a good starting point, if your a proficient welder any low fequency box will seam body panels well enough for home use.

[lasttimearound]

try indiana oxygen, i got a millermatic 180 from them for 589 shipped.

[88Nightmare]

no body has anything used they want to part with?

[Max 93]

how much are you looking to spend?

[88Nightmare]

depends on what ya got

[Cjburn]

try indiana oxygen, i got a millermatic 180 from them for 589 shipped.

Must have bought that a couple years ago, prices are WAY up from that right now. Russ, that Lincoln is not setup for gas either, so you're stuck with flux core. Lincoln, Miller are both great brands. I recently bought my HH 187 for 539.00+tax from Tractor Supply, but their prices has recently gone up.

[Russ Jerome]

Wow your not kidding, I believe my setup that I dont even see on there web site is a SP175, 110 v and had gas hookup, paid like
$400 for it just a couple years ago and another $70 for a toothed drive wheels and plastic liner for aluminum. I've got under $550 into it with tank, replacement on there site would be over $750!

[Max 93]

I have the Home Depot one listed in this thread. very little use. wasn't really looking to sell it, but I don't really need it either.

[DR.FORD]

I have a used Snap-On unit, works well for 400.

[LIL EVO]

I have the home depot Lincoln 135. Works great on most everything. Good power range, it's already setup for gas. I think that's the one you would want as long as you'd be running gas. Otherwise the Lincoln 100 is a little cheaper.

[88Nightmare]

yeah i was looking to run a gas setup. All I might ever weld is body panels or some pretty light fabrication.

[Dr.Buick]

the lincon is the best bang for the buck

[88Nightmare]

still looking. If someone is thinking about selling theirs, pm me details please

[LIL EVO]

New one out of your price range?

Post a craigslist want ad. You'll get plenty of hits. Or search for welder. Ebay is good too!

[88Nightmare]

I really only need it for this one project im working on. Not gonna be much use to me after that

[awsomeears]

So borrow one for $50 and call it a day !!!

[88Nightmare]

where can I do that?

[awsomeears]

where can I do that?

Seeing there are people in this thread selling one I'm sure they'd like to make $50 for a few days of usage :thumbsup

I mean if I had one I would borrow it to you for $50 - $75 depending how much wire you use :thumbsup

[88Nightmare]

I'd buy my own spool of wire and I'd refill the gas when I finish

[Windsors 03 Cobra]

I have one with gas and wire I will let someone use for a small fee, say $25 thats half what he put above. I would probably have to have a deposit ? Nothing personal just I have borrowed expensive shit to friends of a friend before and never saw the tool or the guy again.

110V Lincoln, as brand new and that would be the way I expect it back.
Can even meet halfway.

[88Nightmare]

pm sent

[awsomeears]

That's mighty nice !!!

[88Nightmare]

bcm rocks