350-Z28
11-25-2008, 04:24 AM
Getting rid of everything with the exception of the race car, only need one project at a time and I've kinda lost interest in everything.
1988 Camaro, originally V6 auto has the 91-92 RS/Z28 appearance package and has holes in trunk for the high rise spoiler that came on these cars. I have $800 in it, I'll take $600 clean title, clean body. Or $900 if you want both engines that I have laying around to go with it and all parts.
1982 Mustang GT would need to file lost title. Clean body, crappy cheap paint done by a previous owner red in color. newer 5.0 i would guess, has the serpentine belt drive, motor has at the least a mild cam and a 600 cfm holley carb. 87+ appearance package posi rear end, lakewood shatterproof bell housing, new zbag aftermarket T5 trans, b&m short throw, traction bars, all suspension looks like it was recently replaced currently not starting (bad solenoid and battery) Ran when parked, drove it up and down the road and it ripped pretty good. I have about $900 in it, I'd take $800 for it, perfect strip monster.
350 4-bolt and a 327 SBC both complete motors in various stages of disassembly. 350 came out of a 76 suburban, and the 327 is a 69, dunno what vehicle however. $275 for both motors. If you want extra parts I have a cloyes hex-a-just timing set NIB and lunati hydraulic flat tappet lifters for an additional $100
TPI set up, manifolds, plenum, throttle body, runners in great shape $300, I have a stock computer and harness somewhere if I can find them $100 extra for those.
I have access to a trailer to haul the cars, will haul for the cost of the fuel I just really need to get rid of it all, motivated seller.
1988 Camaro, originally V6 auto has the 91-92 RS/Z28 appearance package and has holes in trunk for the high rise spoiler that came on these cars. I have $800 in it, I'll take $600 clean title, clean body. Or $900 if you want both engines that I have laying around to go with it and all parts.
1982 Mustang GT would need to file lost title. Clean body, crappy cheap paint done by a previous owner red in color. newer 5.0 i would guess, has the serpentine belt drive, motor has at the least a mild cam and a 600 cfm holley carb. 87+ appearance package posi rear end, lakewood shatterproof bell housing, new zbag aftermarket T5 trans, b&m short throw, traction bars, all suspension looks like it was recently replaced currently not starting (bad solenoid and battery) Ran when parked, drove it up and down the road and it ripped pretty good. I have about $900 in it, I'd take $800 for it, perfect strip monster.
350 4-bolt and a 327 SBC both complete motors in various stages of disassembly. 350 came out of a 76 suburban, and the 327 is a 69, dunno what vehicle however. $275 for both motors. If you want extra parts I have a cloyes hex-a-just timing set NIB and lunati hydraulic flat tappet lifters for an additional $100
TPI set up, manifolds, plenum, throttle body, runners in great shape $300, I have a stock computer and harness somewhere if I can find them $100 extra for those.
I have access to a trailer to haul the cars, will haul for the cost of the fuel I just really need to get rid of it all, motivated seller.