PDA

View Full Version : Anyone going to GLD tonight 10/29?



Chalky
10-29-2008, 01:45 PM
Not even sure how crowds this late in the season.

Windsors 03 Cobra
10-29-2008, 02:30 PM
You can always count on Chicago folks being at GLD.
Probably no dead hookers tonight.

4I Notch
10-29-2008, 02:54 PM
I'm going tonight

Irish
10-29-2008, 03:00 PM
I'm going tonight

I am curious as to what you and Luke will run.

SmokinRAM114
10-29-2008, 03:55 PM
14.5 is my guess.

BOSS LX
10-29-2008, 03:56 PM
14.4 with the punk driving, 13.99 with the pro driving!

Irish
10-29-2008, 03:59 PM
I am going to say Low 15's, High 14's....

4I Notch
10-29-2008, 10:05 PM
best pass 14.5 @ 95mph
pulled the drivers side wheel one pass, ran a few more times, then snapped an axle.

DoubleAron
10-29-2008, 10:06 PM
best pass 14.5 @ 95mph
pulled the drivers side wheel one pass, ran a few more times, then snapped an axle.

You guys did an awesome job tonight, very nice first track trip for the both of you!:thumbsup

4I Notch
10-29-2008, 10:07 PM
Thanks Aaron

Irish
10-29-2008, 10:09 PM
Pulled a wheel? I'm calling shens. Otherwise, not too shabby. We are right next to each other! Hit up your cousin for some more parts! You know he has shit laying around! :)

4I Notch
10-29-2008, 10:10 PM
Pulled a wheel? I'm calling shens. Otherwise, not too shabby. We are right next to each other! Hit up your cousin for some more parts! You know he has shit laying around! :)

ask andy...it was only like a half inch off the ground but it was off. not bad for a stock 5.0
but yeah i have some plans for winter...

Irish
10-29-2008, 10:11 PM
We need to line them up next year!

Irish
10-29-2008, 10:12 PM
How did Luke do?

Chalky
10-29-2008, 10:14 PM
Many cars show up? How was track prep?

4I Notch
10-29-2008, 10:14 PM
luke ran 13.2 at 98.
he has to have some stuff done to the motor.

BOSS LX
10-29-2008, 10:14 PM
ask andy...it was only like a half inch off the ground but it was off. not bad for a stock 5.0
but yeah i have some plans for winter...

It did pull the tires. I don't know how, but it did. The car WILL come out swinging next year!

Like Aaron said, both you guys did a great job! You would have had a 14.2 if the axle didn't break!

Congrats to Mr. 13.20! I don't have any clue how that car went that fast!

Bobbys farm truck manage a 14.8.

4I Notch
10-29-2008, 10:15 PM
Many cars show up? How was track prep?

there were probably a dozen cars or less, and the track was prepped pretty decent.

Irish
10-29-2008, 10:16 PM
13.2. I am impressed! Must have been from the weight reduction mods :rolf

Did it pull the tires or tire?

I hope it does come out swinging! I plan on eating a few ponies next year... :devil

4I Notch
10-29-2008, 10:18 PM
13.2. I am impressed!

Did it pull the tires or tire?

I hope it does come out swinging! I plan on eating a few ponies next year... :devil

we'll see about that :D

Irish
10-29-2008, 10:24 PM
we'll see about that :D

The only thing you are going to see is my roll pan....

BOSS LX
10-29-2008, 10:26 PM
The only thing you are going to see is my roll pan....

There will be 408 reasons that won't be true!:thumbsup

Irish
10-29-2008, 10:28 PM
There will be 408 reasons that won't be true!:thumbsup

I have 383 reasons why it will be.

4I Notch
10-29-2008, 10:30 PM
I have 383 reasons why it will be.

Guess we will just have to wait and see.

Irish
10-29-2008, 10:31 PM
Don't have to wait.... I know! :devil.

4I Notch
10-29-2008, 10:32 PM
alright :D

BOSS LX
10-29-2008, 10:32 PM
Don't have to wait.... I know! :devil.

Oh, now it's on!

Irish
10-29-2008, 10:34 PM
Like Donkey Kong....

Throw the kid some parts Boss... he is going to need them... :)

4I Notch
10-29-2008, 10:41 PM
all I'm going to need is a little 93 octane and i will be ready to do work!

GRAMPS SS
10-29-2008, 10:49 PM
Dammmmmmmmmmmmmmmm josh........

Irish
10-29-2008, 10:52 PM
93 is where it's at. Man I can't wait for next year. Are you running N/A next year Jesse?

I am going to tell you right now that I am going to be spraying....

885.0stang
10-29-2008, 11:03 PM
congrats you guys. 13.2 at 98 dam i need gears like now.:flipoff2: what were you guys launching at.

4I Notch
10-29-2008, 11:13 PM
Josh - i will be running N/A

and i was launching at 3k - 3500k

i had 20 psi in my drag radials, went down to 17psi and thats when the axle let go.
that launch would have been hardcore too...:mad:

Irish
10-29-2008, 11:18 PM
Josh - i will be running N/A

and i was launching at 3k - 3500k

i had 20 psi in my drag radials, went down to 17psi and thats when the axle let go.
that launch would have been hardcore too...:mad:

Are you going to get better axles or just replace it with a stock one for now?

It's a good thing it happened at the line and not down the track! Time to get some C clip eliminators!

4I Notch
10-29-2008, 11:19 PM
I'm probably just going to replace it with a stock one for now. but over winter i am going to get aftermarket ones.

scaleracer
10-29-2008, 11:21 PM
Congrats on the times guys! :thumbsup

Irish
10-29-2008, 11:22 PM
Are you going to try and score a trac-loc out of an explorer so you can run 31 spline axles?

I may be running an an 8.8 next year myself LOL.

FourEyedFord
10-29-2008, 11:35 PM
It did pull the tires. I don't know how, but it did. The car WILL come out swinging next year!

Like Aaron said, both you guys did a great job! You would have had a 14.2 if the axle didn't break!

Congrats to Mr. 13.20! I don't have any clue how that car went that fast!

Bobbys farm truck manage a 14.8.

Congrats guys on tonight's runs! Awesome job for a first time out! :headbang

I'm happy with my tow truck too! :D

SmokinRAM114
10-30-2008, 08:44 AM
damn son 14.5 u owe me lunch!! wat was my guess?? ;)





Congrats guys on tonight's runs! Awesome job for a first time out! :headbang

I'm happy with my tow truck too! :D





2 B's 1 O - ur shit is weak:goof how bad did it spin? one wheel peel ftw boii!!were u runnin on 5? :shades:D
mod hpop!!!!!!!:headbang

4I Notch
10-30-2008, 01:04 PM
pics of the carnage.
http://i77.photobucket.com/albums/j75/TA-MommasBoy/100_0038.jpg
http://i77.photobucket.com/albums/j75/TA-MommasBoy/100_0033.jpg
http://i77.photobucket.com/albums/j75/TA-MommasBoy/100_0036.jpg
http://i77.photobucket.com/albums/j75/TA-MommasBoy/100_0037.jpg
http://i77.photobucket.com/albums/j75/TA-MommasBoy/100_0032.jpg

DynoTom
10-30-2008, 01:07 PM
Wow ! you are lucky that you were not at speed when it let go ! That would have been messy I think !:wooo

4I Notch
10-30-2008, 01:10 PM
haha yeah I'm pretty lucky

DoubleAron
10-30-2008, 01:16 PM
Who were the 2 jokers who had you lower the tire pressure before that pass?:wstupid:slap Sorry:rolf

4I Notch
10-30-2008, 01:16 PM
Who were the 2 jokers who had you lower the tire pressure before that pass?:wstupid:slap Sorry:rolf

haha it's all good :rolf

DynoTom
10-30-2008, 02:12 PM
Who were the 2 jokers who had you lower the tire pressure before that pass?:wstupid:slap Sorry:rolf



I'm sure Jesse would agree that those same " 2 jokers " are just a part of a group of guys that will help out in gettin his car totally badd azz set up to run the 1320 !

Irish
10-30-2008, 02:14 PM
I'm sure Jesse would agree that those same " 2 jokers " are just a part of a group of guys that will help out in gettin his car totally badd azz set up to run the 1320 !


They better.... He is going to need it:devil:goof

4I Notch
10-30-2008, 02:15 PM
I'm sure Jesse would agree that those same " 2 jokers " are just a part of a group of guys that will help out in gettin his car totally badd azz set up to run the 1320 !


for sure! :headbang

DynoTom
10-30-2008, 02:26 PM
for sure! :headbang

Yea, you have quite a pool to pull from as far as guys that know WTF they are doing with Fox chassis....


Boss, Double A , Bobbie , Ian and Sam just to name a few....those guys have been into the game for some time and have learned a thing or two ....;);)

Irish
10-30-2008, 02:28 PM
Yea, you have quite a pool to pull from as far as guys that know WTF they are doing with Fox chassis....


Boss, Double A , Bobbie , Ian and Sam just to name a few....those guys have been into the game for some time and have learned a thing or two ....;);)

See Jesse, you are already ahead of the game... How many people around here, that we know, have had as much experience with a V8 S10?

Test and tune here I come...

4I Notch
10-30-2008, 02:35 PM
not many that I can think of

DoubleAron
10-30-2008, 02:54 PM
The only one I can think of was missing his 2 front teeth, lived in a trailer, and was married to his sister.:D

Irish
10-30-2008, 02:57 PM
The only one I can think of was missing his 2 front teeth, lived in a trailer, and was married to his sister.:D

Now is that anyway to talk about one of your family members?:thumbsup

DoubleAron
10-30-2008, 02:59 PM
Now is that anyway to talk about one of your family members?:thumbsup

:rolf

There are quite a few fast ones out there if you poke around on Yellowbullet.com.

SmokinRAM114
10-30-2008, 03:02 PM
:rolf

There are quite a few fast ones out there if you poke around on Yellowbullet.com.

bobby has his own web site?