PDA

View Full Version : 700r4 question


SBC-Fox
10-21-2008, 11:44 PM
I put a new trans in the camaro this weekend its a 93 z28 and i put in a rebuilt iroc 700r4 everything went awesome except the plug on the side. The 93 has a 5 prong plug and the iroc trans has a 4 prong plug in. What does that plug do? Do you need it? Thanks

Ryan:headbang
STANMAN
10-22-2008, 12:02 AM
I put a new trans in the camaro this weekend its a 93 z28 and i put in a rebuilt iroc 700r4 everything went awesome except the plug on the side. The 93 has a 5 prong plug and the iroc trans has a 4 prong plug in. What does that plug do? Do you need it? Thanks

Ryan:headbang


It's the history eraser plug, don't plug it in or history erases itself and then the mullet never would have existed, and we can't have THAT can we:stare
jersyboyy
10-22-2008, 02:01 AM
i have no computer on my car no wires going to my trans and it runs just fine. I say kick the plug to the curb. Make sure your detent cable is setup correctly or youll burn through this trans faster than you can shoot a booger out your nose(soposedly humans can do that really really fast ;))
juicedimpss
10-22-2008, 09:06 AM
ryan,that controls the convertor lockup clutch.
SBC-Fox
10-22-2008, 10:13 AM
well to put the stall in it we had to knock out the lock up pin or what ever that was so i dont need the plug then?
juicedimpss
10-22-2008, 11:10 AM
correct.
did you have to use the anti lockup valve kit from trans go?
SBC-Fox
10-22-2008, 11:20 AM
no just w/e came from b and m