who tunes GTPs??

[SlowStee]

One of my buddies is in need of a tune for his 2000 GTP...minor mods like headers, pulley, ect.



Someone!!

[ND4SPD]

That's a good question because the programmers for the GTPs are about $500 and you're limited to two VINs. I've been trying to get ahold of the software to see if I could crack it for multiple cars... but didn't get around to it before I sold my GTP.

I'm not aware of any GTP specific shops in the immediate area.

[jamest]

Contact Gabe aka Nitrous on here. I think he still does custom tuning for the L67.

[Mr. Brett]

One of my buddies is in need of a tune for his 2000 GTP...minor mods like headers, pulley, ect.



Someone!!


With simple bolt-ons, his best bet is a canned tune from one of the big GTP vendors.

This would be more than sufficient...

http://www.zzperformance.com/grand_prix/products1.php?id=182&catid=107

[forest]

I gotta check but I think I can.

[SLOWC5]

unless you add a cam, Those cars run quite well on a Aftermarket PCM and plugs and a T-stat.

I was running 12.486@108.60 on a aftermarket PCM ( DHP, ZZP ) and no extra tuning.

[sweetgtx]

Ya im looking for someone close to me , who can do a tune the L67 with a lot of mods. I know theres more power in that motor, i would like to unleash it:headbang

[theavenger333]

like slowc5 and mr. brett said, a DHP or ZZP pcm would do the trick for a mildly modded car

[T-Bag]

zzp pcm ftw

[Lash]

Listen to these guy ^

They know what they are talking about when it comes to GP's.

[sweetgtx]

I already have a ZZP PCM (custom):), it could still use a tune :thumbsup, I should be faster than I am:mad: if i remember right I also bought slowc5s 42.5's and I have the biggest cam u can run on stock heads

[Cryptic]

Are you sure there isn't other issues going on? Are you seeing any knock?

[Daytonapacecar959]

zzp pcm ftw

X2 but mine is a custom/dynoed tuned PCM.

[sweetgtx]

no I don't really c alot of kr. With the 3.0, I c no kr, but with a 2.8 i do, so I only run the 2.8 @ the track with race gas and c no kr, I also have an ICCU and ZZP XP cam, and a ZZP stage 2 IC,Slp headers and the list goes on. I think it needs a dyno tune to get all the power out

I ran a 12.75:confused and I should be faster,a 1.8 ,60 foot. @ 108mph:stare

[nitrous]

With an XP cam and IC you should be knocking on 11s. Dyno tuning will help the straight line times, but for good driveability there's nothing like street tuning.

I responded to your PM.

[forest]

no I don't really c alot of kr. With the 3.0, I c no kr, but with a 2.8 i do, so I only run the 2.8 @ the track with race gas and c no kr, I also have an ICCU and ZZP XP cam, and a ZZP stage 2 IC,Slp headers and the list goes on. I think it needs a dyno tune to get all the power out

I ran a 12.75:confused and I should be faster,a 1.8 ,60 foot. @ 108mph:stare

My software should support your car just fine. Call me up if you want a tune on the dyno. 1-414-322-0280 Forest

[Poncho]

I can sell you a certificate for some dyno runs @ WB Dyno or Beyond Engineering.

[BAD LS1]

With an XP cam and IC you should be knocking on 11s. Dyno tuning will help the straight line times, but for good driveability there's nothing like street tuning.

I responded to your PM.

QFT !!!

I could help with dialing it in too formy/SweetGTX, ive done a couple of these cars. Just would need to pay for credits and my time which will be reasonable.

[Z28Envy]

QFT !!!

I could help with dialing it in too formy/SweetGTX, ive done a couple of these cars. Just would need to pay for credits and my time which will be reasonable.

X2 for BADLS1! Tom does great work Chris!! He has done all my work and you know how good my car goes!!

[sweetgtx]

Nitrous, I didn't get your PM:stare. Thanks for everyones help and ideas:thumbsup, looks like the car will be tuned in september:wooo. I 'll let u know the results, hopefully we can get some more power from it:wow

[SlowStee]

With an XP cam and IC you should be knocking on 11s. Dyno tuning will help the straight line times, but for good driveability there's nothing like street tuning.

I responded to your PM.

Think you can help my buddy out??

[nitrous]

Yea, no problem. Just PM me with his info.

Gabe