Nitrous Refill in Racine

[Fast SVT]

Where is the closest place to Racine to get a bottle refilled?

[Smokey1226]

My Guess would be Ron.

[Fast SVT]

My Guess would be Ron.

umm...okay, who/where?

[Smokey1226]

Clocks off Racing sponsor?

[juicedimpss]

umm...okay, who/where?

im in oak creek
414-852-1825
i need the bottle for a few hours,unless you want to exchange the bottle until your next fill.
:thumbsup

[Fast SVT]

im in oak creek
414-852-1825
i need the bottle for a few hours,unless you want to exchange the bottle until your next fill.
:thumbsup

I just need it by tomorrow.

PM me your address, my wife is likely dropping it off because I am at work, it has an opener on it that you need to take off and put back on please.

your website says $4.50/lb

[Fast SVT]

Still open for suggestions, I was told about C&S Performance but they want too much per lb.

[70 cutlass 442]

Still open for suggestions, I was told about C&S Performance but they want too much per lb.

F*UCK C&S, too much per lb, then they toped off my buddies bottle and charged more then he got, plus hes another 30-45 north of ron.

[fastenhard]

im in oak creek
414-852-1825
i need the bottle for a few hours,unless you want to exchange the bottle until your next fill.
:thumbsup

If its still 4.50 lb ill be getting n2o from u for now on. 5.50 lb is just to much. I use to get it from big 3, $5lb and the 8th one is free. Was the best deal as I live right down the road. They closed so now I need to find another place. Have to penny pinch when im filling 2 10lb every week or so. :alcoholic

[70 cutlass 442]

/\/\ how the hell do you go through 2 10 lb bottles a week? a 50 shot will get you like 18 1/4 mile passes per bottle.

[juicedimpss]

If its still 4.50 lb ill be getting n2o from u for now on. 5.50 lb is just to much. I use to get it from big 3, $5lb and the 8th one is free. Was the best deal as I live right down the road. They closed so now I need to find another place. Have to penny pinch when im filling 2 10lb every week or so. :alcoholic

it is up this year. i will do $5.00/lb for BCM members.

[Crawlin]

it got real expensive as of late. i think big mike at Fast Times is 5.50/lb too

[fastenhard]

/\/\ how the hell do you go through 2 10 lb bottles a week? a 50 shot will get you like 18 1/4 mile passes per bottle.

Thats how it was last year on the 100 shot. The dual purge doesn't help nether. Soon it will be up to a 100 again and around the square we go.

[SmokinRAM114]

/\/\ how the hell do you go through 2 10 lb bottles a week? a 50 shot will get you like 18 1/4 mile passes per bottle.

come on now Jon. on lukes cummins it goes through a bottle every 2 passes:goof

[70 cutlass 442]

come on now Jon. on lukes cummins it goes through a bottle every 2 passes:goof

and still only clips of a 12.7x :D

[fastenhard]

Forest is the one that filled mine at big 3. I use my n2o like crazy. Its the only way I can hang with the big boys lol.

[SmokinRAM114]

and still only clips of a 12.7x :D

no, thats on 50 shot:)

[70 cutlass 442]

no, thats on 50 shot:)

haha, drop a 2 in front of that maybe :thumbsup

[Flicktitty]

/\/\ how the hell do you go through 2 10 lb bottles a week? a 50 shot will get you like 18 1/4 mile passes per bottle.

shit, i know a guy who used to go thru a bottle sunday-thurs and 2 over the course of a friday and saturday lol. guy was on the bottle more then a baby.

[70 cutlass 442]

shit, i know a guy who used to go thru a bottle sunday-thurs and 2 over the course of a friday and saturday lol. guy was on the bottle more then a baby.

I could easily do that in the stang, but when i saw he was on a 50 shot i was like holy hell hes gotta be spraying a lot

[SmokinRAM114]

haha, drop a 2 in front of that maybe :thumbsup

no seriously, 12.85 on a single tune stock charger on a 250+. LOL it is stacked now with a chip and programmer, 62/71mm turbo and went 12.75 on a .073 jet. we havent put it on kill yet. also the programmers have another 80+ hp left on it but we need to get the fuel rail fed so the rail pressure doesnt go to ZERO lol then its getting kill again.

[70 cutlass 442]

a .73 jet is close to a 240 shot

[SmokinRAM114]

a .73 jet is close to a 240 shot

.073 would be a 150.

[wheelsofsteel]

.073 would be a 150.

It depends on the kit/manufacturer. I would venture to say that a 73 jet would be a good 175-200hp. An 82 jet would be in the 250hp range.

[juicedimpss]

It depends on the kit/manufacturer. I would venture to say that a 73 jet would be a good 175-200hp. An 82 jet would be in the 250hp range.

i would agree its about 175 hp.
thats a big dry shot.
:thumbsup

[SmokinRAM114]

i would agree its about 175 hp.
thats a big dry shot.
:thumbsup

that aint shit. should see the "other" jet on the second stage.:rolf:rolf pretty much in there to hold the -4an line in the intake:goof:thumbsup

[70 cutlass 442]

my .068 in a NOS jet is rated at 200 HP

[juicedimpss]

http://www.robietherobot.com/NitrousJetCalculator.htm

the fuel jetting from here is VERY conservative.
FYI

[70 cutlass 442]

haha, i was right on the money:

Results
The Fuel jet size should be 0.041" or 1.033mm

A Nitrous jet size of .073" or 1.8542mm should produce:
240.66 HP with 1 port(s)



Actual HP to the wheels: 204.56 HP

[fastenhard]

http://www.robietherobot.com/NitrousJetCalculator.htm

the fuel jetting from here is VERY conservative.
FYI

Thats what I go off. Right now I have .040n2o and 27F.

[SmokinRAM114]

the calc is for a wet sytem if that matters?? but nice lol. makes me wonder what the 2nd stage is. at 950psi bottle pressure we use almost an entire bottle every 2 passes. there is enough left to almost 1/8mi 3rd pass. thats no purge either.

[70 cutlass 442]

what size jet is on the second stage?

[SmokinRAM114]

what size jet is on the second stage?

custom.:rolf:rolf:rolf it wasnt big enough so the drill fixed that. i dont know off the top of my head i think it started as a .125:goof we think a 15% driveline deduction in a 7500lb truck with 33s and a full billet trans it netted almost 200hp to the wheels on the dyno.

[70 cutlass 442]

/\/\ just build a car. trucks are made to pull stuff.

[nismodave]

Get it fill from Ron aka Clocks Off Racing.

Support BCM SPONSORS!!!!

2nd choice is Fast Times in Milwaukee.

[Reverend Cooper]

pretty much ron or the guys at fast times rons prolly closer tho

[Yooformula]

yeah but Ron is a sponsor will give the better deal!

[Reverend Cooper]

Ron is a sponsor,But i dont want someone to ream me for saying that he is the only guy here to do that.