PDA

View Full Version : rear end question


sloLs1
07-15-2008, 07:39 PM
anyone know if a GM 14 bolt 8 lug rear end is the same lug pattern as a Dana 60 8 lug???
WickedSix
07-15-2008, 07:41 PM
should both be 8 on 6.5 but the inner dia. on the respective wheels differ between manufacturers
wrath
07-15-2008, 07:50 PM
Compared to what Dana 60?

Ford used different studs on their 60s and had a different hub diameter. Plus when the new body style Pooper Duties came out in 98 they switched to the 8 on 170mm bastard pattern.
sloLs1
07-15-2008, 08:33 PM
Compared to what Dana 60?

Ford used different studs on their 60s and had a different hub diameter. Plus when the new body style Pooper Duties came out in 98 they switched to the 8 on 175mm bastard pattern.

a dodge d60.... if that helps
wrath
07-15-2008, 08:45 PM
Dodge used 8 on 6.5" at least through 2004. It was 8 on 170mm for Ford by the way.

What year are we talking about? Newer Dodge stuff is AAM in the front.
sloLs1
07-15-2008, 09:29 PM
Dodge used 8 on 6.5" at least through 2004. It was 8 on 170mm for Ford by the way.

What year are we talking about? Newer Dodge stuff is AAM in the front.

i have a '98 ram cummings... and this kid has a set of wheels/tires off a GM "mud truck" :rolf that has what he said "corparte 14 bolt " <<< what ever that means....
WickedSix
07-15-2008, 09:34 PM
should fit iirc gm has the largest hub id
wrath
07-15-2008, 09:38 PM
There is a 14SF (semi-floater) with a 9.5" ring gear and a 14FF (full-floater, has hubs like in the front) that comes in 10.5" (most common) and 11.5" (in some GMT800 and GMT900).

If they're 8 lug, they'll fit on your Dodge.
sloLs1
07-15-2008, 10:14 PM
ok THANKS FOR THE INFO GUYS!