diablizzard
06-15-2008, 10:59 AM
block:
2-bolt block bored over .030"
clearanced for stroker
new bearings, rear main seal and freeze plugs
main girdle also installed w/ main studs
rotating assembly:
eagle cast stroker crank
eagle I-Beam 6" rods bushed for floating wrist pin
keith black pistons part # 9909HC
total seal ( I'm almost positive chromemoly)
all balanced
valvetrain:
comp cams part # 12-773-8 solid roller
in. .582 ex. .588
comp cams solid roller lifters
has been degreed
double roller chain installed
extras:
new timing cover with cam button
stock oil pan
stock dipstick
new melling oil pump with pick up
edelbrock chrome valvecovers
I'm looking to get about $3000 for the motor.
it is still in the wrapping, all the machine work and assembly was done at borchardt speed automotive.
all paper work is included
the plan was to put dart pro 1 aluminum heads with 64cc combustion chambers and 215cc intake ports. the compression wold be around 11.3:1
my reason for selling is because I need the money, and I probably won't get the heads any time soon
2-bolt block bored over .030"
clearanced for stroker
new bearings, rear main seal and freeze plugs
main girdle also installed w/ main studs
rotating assembly:
eagle cast stroker crank
eagle I-Beam 6" rods bushed for floating wrist pin
keith black pistons part # 9909HC
total seal ( I'm almost positive chromemoly)
all balanced
valvetrain:
comp cams part # 12-773-8 solid roller
in. .582 ex. .588
comp cams solid roller lifters
has been degreed
double roller chain installed
extras:
new timing cover with cam button
stock oil pan
stock dipstick
new melling oil pump with pick up
edelbrock chrome valvecovers
I'm looking to get about $3000 for the motor.
it is still in the wrapping, all the machine work and assembly was done at borchardt speed automotive.
all paper work is included
the plan was to put dart pro 1 aluminum heads with 64cc combustion chambers and 215cc intake ports. the compression wold be around 11.3:1
my reason for selling is because I need the money, and I probably won't get the heads any time soon