Aftermarket Coolant Catch can Question ?

[awsomeears]

I'm in the market for a aftermarket catch can, mine has to be relocated due to the turbo being to close.

Stock is as follows = Cap -----hose----- bottome of coolant tank, and there is also a breather up top.

Now the reason there is a breather is so that the dam thing doesn't burst because of PSI building up and that its open to the air so the coolant can be sucked back in when cooling down correct ?

So then this should be what I need :)

http://www.jegs.com/i/JEGS/555/51145/10002/-1

I can use the 90 degree fitting for the bottom and use the breather plug/fitting for the open air relief.

Any help would be great, soon the neon will be running :alcoholic

[wrath]

Summit makes a round one that works well. It has no bladder in it though. I'd get one with a bladder so it doesn't leak on the ground if you overheat.

[awsomeears]

Anyone else have thoughts on this ?

Need to order one in the next day or two ?

Thanks

[Windsors 03 Cobra]

The 90 on the bottom and the included breather/fill plug on the top for a made in USA fabricated aluminum coolant catch can for $40 ? :headbang

[awsomeears]

Yea thats what I thought !!!

I'm going to place a order tonight after a few more searches.