silververt
05-18-2008, 07:10 PM
I've decided its finally time to part with this car, I no longer have the time to keep up with it, so it is time for it to go. I will try to sell it all together for a couple weeks or will begin parting it out after that.
The car has 71,500 miles on it. The car has dynoed 575hp and 560tq with the last shortblock and went 10.46 at 133. That block lasted 5 years at that level. (Luckily) Since I changed blocks I have only had the 12lb pulley on it.
Engine:
Explorer short block, Trick Flow heads, Edelbrock RPM 2 intake, TFS stage 2 cam, TFS 1.6 RR, TFS pushrods, Vortech V1 S-trim, Powerpipe, BBK 1 & 3/4" ceramic longtubes with off-road h-pipe, also have the catted h-pipe for it, Flowmaster exhaust.
Drivetrain:
Tremec 3550 trans, Pro 5.0 shifter, Spec 3 clutch, FMS aluminum D/S, FMS 3.55 gears, FMS rear end cover, Superior 28 spline axles, Stock traction lock with added clutch packs.
Fuel:
255lph in tank and t-rex, 38lb lucas injectors, bbk pressure reg., FMU and snow methanol kit.
Suspension & steering, chassis:
FMS 'C' springs, Lakewood 70/30 fronts, 50/50 rears, Flaming River manual rack, Subframes, 6-point cage.
Electronics & gauges:
Anderson series IV PMS, Uego 2000 wide band, boost, fuel, water, and oil pressure gauges.
Cooling:
Fluidyne radiator, Electric fan, 160 t-stat.
Exterior:
Speedware 17" by 9" Cobra R's with Mickey 275/40's on the rear and Nitto 245's on the front. Cervini ram air hood.
I am sure I am forgetting some stuff. I also have almost all of the stock parts that will be included. Sorry about the bad pics/ just took off the car cover and took a few.
Asking $11,500
Email me at silververt@hotmail.com Thanks,
Josh
The car has 71,500 miles on it. The car has dynoed 575hp and 560tq with the last shortblock and went 10.46 at 133. That block lasted 5 years at that level. (Luckily) Since I changed blocks I have only had the 12lb pulley on it.
Engine:
Explorer short block, Trick Flow heads, Edelbrock RPM 2 intake, TFS stage 2 cam, TFS 1.6 RR, TFS pushrods, Vortech V1 S-trim, Powerpipe, BBK 1 & 3/4" ceramic longtubes with off-road h-pipe, also have the catted h-pipe for it, Flowmaster exhaust.
Drivetrain:
Tremec 3550 trans, Pro 5.0 shifter, Spec 3 clutch, FMS aluminum D/S, FMS 3.55 gears, FMS rear end cover, Superior 28 spline axles, Stock traction lock with added clutch packs.
Fuel:
255lph in tank and t-rex, 38lb lucas injectors, bbk pressure reg., FMU and snow methanol kit.
Suspension & steering, chassis:
FMS 'C' springs, Lakewood 70/30 fronts, 50/50 rears, Flaming River manual rack, Subframes, 6-point cage.
Electronics & gauges:
Anderson series IV PMS, Uego 2000 wide band, boost, fuel, water, and oil pressure gauges.
Cooling:
Fluidyne radiator, Electric fan, 160 t-stat.
Exterior:
Speedware 17" by 9" Cobra R's with Mickey 275/40's on the rear and Nitto 245's on the front. Cervini ram air hood.
I am sure I am forgetting some stuff. I also have almost all of the stock parts that will be included. Sorry about the bad pics/ just took off the car cover and took a few.
Asking $11,500
Email me at silververt@hotmail.com Thanks,
Josh