Uh Oh...

[Breecher_7]

XXX CI
XX PSI Boost
Forged Bottom End

http://i28.photobucket.com/albums/c249/antoninodamato/DSCN1830.jpg

Im thinking a certain turbo camaro should be scared! :stare

Dont get butthurt Tom, im just busting your balls. :rolf

[nitroxtreme]

NICE....:thumbsup

[nismodave]

Umm, whos car?

[Breecher_7]

Umm, whos car?

:rolf I can assure you its not mine. Its a friends....

[nismodave]

:rolf I can assure you its not mine. Its a friends....

Well it looks like a heartbreaker.:thumbsup

[Breecher_7]

Well it looks like a heartbreaker.:thumbsup

Its gonna be somthin... Thats for sure :stare

[Windsors 03 Cobra]

Atleast the turbo car isnt suckin 75 horse right off the front of the crank to run a power adder ?
Shoulda went turbo.

[Reverend Cooper]

NEVER underestimate a blower car

[Windsors 03 Cobra]

Its not the blower that is scarin me, its that SCARY FORGED BOTTOM END.
Next thing you know we will be hearing about how its held together with ARP HARDWARE. :rockwoot:

[BAD LS1]

It's a fullsize truck too for those with a sharp eye.

[BOSS LX]

NEVER underestimate a blower car

+1:thumbsup

[pOrk]

Is that the truck that had the 61 hp increase on foress dyno? haha


XXX CI
XX PSI Boost
Forged Bottom End

http://i28.photobucket.com/albums/c249/antoninodamato/DSCN1830.jpg

Im thinking a certain turbo camaro should be scared! :stare

Dont get butthurt Tom, im just busting your balls. :rolf

[GTSLOW]

:rolf :rolf

[DurtyKurty]

Are those blocks aluminum too?

[HRSEPLA]

Blowzilla bowlshet

[BAD LS1]

Are those blocks aluminum too?

Not to start out with, unless its a non flex fuel 5.3. Prob an LS2 block.

[BAD LS1]

3xx inches
.xxx jets

9.xx's dyno #s? *Shrugs* Probably will never see one.

http://i264.photobucket.com/albums/ii173/LS1builder/IMG_0006-6.jpg

[GTSLOW]

^^^ What trans will it be bolted to? :goof

[BAD LS1]

^^^ What trans will it be bolted to? :goof

TH400, what is this pass time? lol

[Breecher_7]

It's a fullsize truck too for those with a sharp eye.

Obviously you dont have a sharp eye tom. Its the furthest thing from a truck that GM makes. :rolf

[BAD LS1]

Obviously you dont have a sharp eye tom. Its the furthest thing from a truck that GM makes. :rolf

Ok its a vette, the firewall sound defelction material and the AC lines on the left mimick a GMT800. BFD??

[Breecher_7]

Ok its a vette, the firewall sound defelction material and the AC lines on the left mimick a GMT800. BFD??

Its just funny how your so quick to spout off with a comment "if you have a sharp eye" and then your completely wrong.

The fact that the blower sticks up above the hood line would have been a pretty good give away as well.

Dont get all defensive, its ok to admit that your wrong.

[*SNOOP*]

What ever the fvck it is...... I want a piece!!!! :thumbsup

[slickwilly]

Its just funny how your so quick to spout off with a comment "if you have a sharp eye" and then your completely wrong.

The fact that the blower sticks up above the hood line would have been a pretty good give away as well.

Dont get all defensive, its ok to admit that your wrong.

Come on, if YOU'RE gonna tell somebody off on the internet, the least you could do is spell shit right.

[2 bad z's]

I hope it works better than what it does on the cobras:rolf

[GRAMPS SS]

ohhhhhhhhhhhhhhh SNOOP wants some of it...this could get good.....

[Breecher_7]

What ever the fvck it is...... I want a piece!!!! :thumbsup

That can definitly be arranged! Should be up and running in a week or two. :thumbsup

[Reverend Cooper]

Blowzilla bowlshet

thank you,i'm not the only one that felt that way

[GTSLOW]

That can definitly be arranged! Should be up and running in a week or two. :thumbsup

Oh shiznit!! :wooo

[Reverend Cooper]

That can definitly be arranged! Should be up and running in a week or two. :thumbsup

no offense but your picking races for your buddys car already. he should come on here himself and call out time i think

[Breecher_7]

He is not a member of this board, Nor am I "picking races" for him. I know he will not have any problem racing people once its done though, this is in fact what he is building it for. But if you would like, i just end this thread at that and tell him to create a login if he is interested.

Dont matter much to me, just thought id show ya that there is about to be another pretty nasty street car out this summer. I thought it was cool build.

[Yooformula]

very cool build indeed. the saying there is ALWAYS something bigger and badder than you is so true especially after seeing the rods at the speed inc open house yesterday. It would be very hard to outgun some of those rides incld coop, tom, hell even lit being some of those big guns.

[FourEyedFord]

Beware of the 12.20s @ 120!!!!! :wooo

[Reverend Cooper]

He is not a member of this board, Nor am I "picking races" for him. I know he will not have any problem racing people once its done though, this is in fact what he is building it for. But if you would like, i just end this thread at that and tell him to create a login if he is interested.

Dont matter much to me, just thought id show ya that there is about to be another pretty nasty street car out this summer. I thought it was cool build.

All I'm saying is if he wants a race he should come on here and talk it out. l might be the only one that feels this way but I would run what/when I wanna run,not have someone else that didnt pay for MY build set that up for me. JMHO. Yes its a cool build no doubt and yes it will be a nasty car when done that is not in question. I guess its the whole my dads better than your dad deal,let your dad talk shit for himself if he wants. You should get him to join the board he might enjoy it!!!

[Breecher_7]

All I'm saying is if he wants a race he should come on here and talk it out. l might be the only one that feels this way but I would run what/when I wanna run,not have someone else that didnt pay for MY build set that up for me. JMHO. Yes its a cool build no doubt and yes it will be a nasty car when done that is not in question. I guess its the whole my dads better than your dad deal,let your dad talk shit for himself if he wants. You should get him to join the board he might enjoy it!!!

I guess it was not my place to "agree" to a race, that makes sense. But i guarantee he wont turn it down. I know he is really looking forward to letting this ***** scream. The amount of detail work he is putting into this car is amazing.

[Breecher_7]

And not to be an ass, But I still have no idea how you think the engine bay of a GMT800 looks ANYTHING like the vette

My Old Truck, 06 Silverado Vortec Max, GMT800 platform
http://i28.photobucket.com/albums/c249/antoninodamato/Chevy%20Truck/piggies027.jpg
http://i28.photobucket.com/albums/c249/antoninodamato/Chevy%20Truck/piggies021.jpg

C5 Z06 Corvette
http://i28.photobucket.com/albums/c249/antoninodamato/DSCN1830.jpg
http://i28.photobucket.com/albums/c249/antoninodamato/Dyno/DSCN1835.jpg

[forest]

damn :)

[*SNOOP*]

Looks good!!!! :thumbsup

[Reverend Cooper]

what hood is he going to put on it pictures please

[*SNOOP*]

what hood is he going to put on it pictures please

This one:thumbsup
http://i291.photobucket.com/albums/ll309/LS1STREETRACING/Corvette.jpg

[Reverend Cooper]

that does look badass

[*SNOOP*]

that does look badass

Hell yeah!! I'm building a C5 next!!!:thumbsup

[Breecher_7]

This one:thumbsup
http://i291.photobucket.com/albums/ll309/LS1STREETRACING/Corvette.jpg

Correct

[nitroxtreme]

Well looks like those Fords will start crying now..:stare

[*SNOOP*]

Well looks like those Fords will start crying now..:stare

LOL!!! Yep!!

[FourEyedFord]

Well looks like those Fords will start crying now..:stare

Who Fords?

[BOSS LX]

Who Fords?

I guess us?



:rolf

[nitroxtreme]

I don't have to name names..They know who they are...

[Reverend Cooper]

ummm yeah my money is on the mustang

[FourEyedFord]

I don't have to name names..They know who they are...

Thats cool and all, but where is the other kenne bell hidden then? :rolf

[*SNOOP*]

Thats cool and all, but where is the other kenne bell hidden then? :rolf

*COUGH*.......LARRY!!!

[BOSS LX]

Larry will win. That car will get down this year!

[*SNOOP*]

Larry will win. That car will get down this year!

Define "get down"? 10s?

[nismodave]

Whos Larry?

[nitroxtreme]

ummm yeah my money is on the mustang

I wouldnt put the buggy in front of the horse just yet...

[nismodave]

Id like to have some runs VS you guys, but Im going to need some land.:D

http://www.clarkcompanies.com/Site%20Revision/images/Large%20Project%20Photos/West%20Point%20Shea%20Stadium%202005.jpg

[SLOWC5]

I hope there's a set of 28" slicks on that car. I dont see many KB vette's putting down great track times. Its hard to harness 500FT LB's at 2500 RPM's

[SLOWC5]

The amount of detail work he is putting into this car is amazing.


The amount of detail...

Like the hose clamps on the 4 inch piece of coolant hose? Is it too expensive to replace the union and 2 hose clamps with one longer piece of hose.

Amazing detail...please

Does the detail contain

1.) Purchase one Kenne bell SC kit for vette
2.) follow instructions and install kit
3.) call customer and tell him its done
?

[Reverend Cooper]

I wouldnt put the buggy in front of the horse just yet...

i would say bobby or andy maybe even larry will have that covered, I would gladly put money up for andy or bobby on that race. just one guys opinion. my slow ass car cant do nothing for him,mines after all a showcar

[TURTLE]

Id like to have some runs VS you guys, but Im going to need some land.:D

http://www.clarkcompanies.com/Site%20Revision/images/Large%20Project%20Photos/West%20Point%20Shea%20Stadium%202005.jpg

i'm with him... but what do i know... i drive a neon:goof

[Poncho]

man you guys can ***** about anything, even someones builds. Find something better to do with your time. Nice build BTW

[HRSEPLA]

I wouldnt put the buggy in front of the horse just yet...

Exactly, that buggy aint gettin in front of any horse. lol:)
J/K, looks neat

[BOSS LX]

The amount of detail...

Like the hose clamps on the 4 inch piece of coolant hose? Is it too expensive to replace the union and 2 hose clamps with one longer piece of hose.

Amazing detail...please

Does the detail contain

1.) Purchase one Kenne bell SC kit for vette
2.) follow instructions and install kit
3.) call customer and tell him its done
?

I was kinda thinking the same thing.:confused


Don't sell your car short Coop!

Or is it Mr. T?:rolf

[FourEyedFord]

i would say bobby or andy maybe even larry will have that covered, I would gladly put money up for andy or bobby on that race. just one guys opinion. my slow ass car cant do nothing for him,mines after all a showcar

:thumbsup

I agree with Andy, Coop! I know whats under that hood...:shades

[FourEyedFord]

The amount of detail...

Like the hose clamps on the 4 inch piece of coolant hose? Is it too expensive to replace the union and 2 hose clamps with one longer piece of hose.

Amazing detail...please

Does the detail contain

1.) Purchase one Kenne bell SC kit for vette
2.) follow instructions and install kit
3.) call customer and tell him its done
?

:rolf :rolf

[Breecher_7]

I hope there's a set of 28" slicks on that car. I dont see many KB vette's putting down great track times. Its hard to harness 500FT LB's at 2500 RPM's

I will let the car speak for itself once its on the street. I do agree that traction WILL be a very big issue though. And as far as 500ft/lbs, id say that # is SIGNIFICANTLY short of what it will put down. Take close look at the size of that supercharger pulley, that should be a good hint.

[Breecher_7]

The amount of detail...

Like the hose clamps on the 4 inch piece of coolant hose? Is it too expensive to replace the union and 2 hose clamps with one longer piece of hose.

Amazing detail...please

Does the detail contain

1.) Purchase one Kenne bell SC kit for vette
2.) follow instructions and install kit
3.) call customer and tell him its done
?



Its more along the lines of the things you CANT see. Such as the fuel system, all the custom made brackets to relocate things so the engine bay doesnt look like ass. The photos dont show much.

[forest]

The amount of detail...

Like the hose clamps on the 4 inch piece of coolant hose? Is it too expensive to replace the union and 2 hose clamps with one longer piece of hose.

Amazing detail...please

Does the detail contain

1.) Purchase one Kenne bell SC kit for vette
2.) follow instructions and install kit
3.) call customer and tell him its done
?

nope details like studs top and bottom, bottom girdle, forged guts, full valvetrain, stage "enough" clutch and fw, hardened torque shaft, billet trans guts, stage x rear end, multiple fuel pumps, -"big enough" fuel lines, ls2 tb, ect.... the list goes on........ and btw, if you knew much, the size of the rad nipple is larger than the size of the head steam pipe dia, so unless you have a better way of connecting these two items than a reducer/coupler, let me know!!! thanks!

[Syclone0044]

Its not the blower that is scarin me, its that SCARY FORGED BOTTOM END.
Next thing you know we will be hearing about how its held together with ARP HARDWARE. :rockwoot:

:rolf:rolf:rolf :thumbsup

That was REALLY funny to me!!! :goof

[badvenom]

who the fvck is larry ??????????????????????

he must have a beast of a car for people with " fast cars " to always want to race him

so before you talk about beating a '10 second car ' maybe you should at least have a 10 second car

[badvenom]

btw ian paint my f-ng car

[BOSS LX]

who the fvck is larry ??????????????????????

he must have a beast of a car for people with " fast cars " to always want to race him

so before you talk about beating a '10 second car ' maybe you should at least have a 10 second car

The man makes sense!

And 10's is getting down!

[forest]

Im hoping for traction limited 9s with this vette. The guys name is Josh, really nice guy, and always willing to have fun with his stuff. Take whomever for rides ect... should be done in 2 weeks or so.

[SLONOMA]

Im just glad breecher is finally making a few posts where he isnt complaining about his truck for once.

[Lash]

Im just glad breecher is finally making a few posts where he isnt complaining about his truck for once.


:rolf

[BOSS LX]

Im hoping for traction limited 9s with this vette. The guys name is Josh, really nice guy, and always willing to have fun with his stuff. Take whomever for rides ect... should be done in 2 weeks or so.

I think that thing hooking on the bumper wouldn't touch 9's. Good luck though.


I got my money on the 76mm.

[Breecher_7]

Im just glad breecher is finally making a few posts where he isnt complaining about his truck for once.

:rolf Aint that the truth....

[Breecher_7]

Im hoping for traction limited 9s with this vette. The guys name is Josh, really nice guy, and always willing to have fun with his stuff. Take whomever for rides ect... should be done in 2 weeks or so.

Quit slackin and get that shit finnished..... :stare

If it doesnt go 9's, im demanding he get his money back... :rolf

[Lash]

Theres a lot of nut swinging going on in here.

[Breecher_7]

Theres a lot of nut swinging going on in here.

I wouldnt call it nutswinging. There is definitly ALOT of trashtalking and hard facts though.

I say drop it at that, in 2 weeks, the car will speak for itself.

[2 bad z's]

Im hoping for traction limited 9s with this vette. The guys name is Josh, really nice guy, and always willing to have fun with his stuff. Take whomever for rides ect... should be done in 2 weeks or so.good luck but i dought it ,be happy if it dips into the 10's first,that irs is not friendly ,vetts do not 60ft that well

[forest]

I think that thing hooking on the bumper wouldn't touch 9's. Good luck though.


I got my money on the 76mm.

What 76mm? the vette has the smallest pulley on it that KB makes and the crank is overdriven 10%. Just to give you an idea of boost level.... I have no clue though what it will run, it is a vette after all... haha

[2 bad z's]

Quit slackin and get that shit finnished..... :stare

If it doesnt go 9's, im demanding he get his money back... :rolfI bet ya $100 it wont go 9,s

[forest]

good luck but i dought it ,be happy if it dips into the 10's first,that irs is not friendly ,vetts do not 60ft that well

I know, but at least this guy is more of a streetracer/cruiser than anything else, hence the pump gas theme.

[Breecher_7]

I bet ya $100 it wont go 9,s

Im not going to take that bet because I KNOW it wont, not this season. But with what is planned for next fall/winter, i wont be suprised if we see it in the 8's

But one step at a time. We will see what happens and if it does run shitty times, it wont be because its underpowered... :rolf

[Lash]

The car isn't even finished yet an already we see that it'll run 8's???

What happens when the fvcker blows up on the first run? lol

[Reverend Cooper]

MR.T say's
"I pity tha foo that tries to race Bobby or Andy."
"ma money is on the mustangs sucka"

[Breecher_7]

The car isn't even finished yet an already we see that it'll run 8's???

What happens when the fvcker blows up on the first run? lol

Like i said, we will see and take it one step at a time.

The power will be there. (if the engine does blow up)

[2 bad z's]

I know, but at least this guy is more of a streetracer/cruiser than anything else, hence the pump gas theme.when you get her ready ,i would like to try mine against ya

[Reverend Cooper]

so were runnig the 20 psi kenne bell here,no heat exchanger other than the one it comes with or what. all crap aside its a cool build

[Breecher_7]

when you get her ready ,i would like to try mine against ya

Im going to ask Josh to join this forum so you can argue with him over it. Im not going to defend the guys car or driving abilities anymore. I posted this to show that there will be yet another nasty car out there this year, not to have a 10 page debate over what it wont do.

[2 bad z's]

Im going to ask Josh to join this forum so you can argue with him over it. Im not going to defend the guys car or driving abilities anymore. I posted this to show that there will be yet another nasty car out there this year, not to have a 10 page debate over what it wont do.No arguement my friend ,he would just get a compliement from myself ,one vette owner to another ,that is a very nice build

[BOSS LX]

MR.T say's
"I pity tha foo that tries to race Bobby or Andy."
"ma money is on the mustangs sucka"

Mr. T has got to stick!:rolf

[forest]

so were runnig the 20 psi kenne bell here,no heat exchanger other than the one it comes with or what. all crap aside its a cool build

we may have to turn the boost down, it may be ok, we have yet to see, and yes there is a good heat exchanger on this one.

[forest]

No arguement my friend ,he would just get a compliement from myself ,one vette owner to another ,that is a very nice build

Im sure he would run it, Ill ask tomorrow, but lets see it get tuned first......

[nismodave]

So when is this 7 second vette coming out?

[pOrk]

I heard this vette was seen in Grand Theft Auto 7 this morning runnin 7's, whos got the you tube link?

[BAD LS1]

76mm... hmmmm i would aggree.

[SLOWC5]

I just want to apologize for my posts about the detail and quality of the work done on any vehicle forest has touched... I obviously have no idea what it takes to install a kit bought from a company and make one off custom parts to make the install the best its ever been. I apologize to Breecher too as I do not have the automotive knowledge that you contain.

Lets see here from corvette forum. I assume forest you will be making a idler pulley like seen here to help with belt slip on your small supercharger pulley? Oh is this the overdrive crank pulley your running too?

http://i22.photobucket.com/albums/b320/AMERICAN_HP/CorvettePhotos079.jpg


I also would like to apologize for saying i understand what it takes too make and custom one off parts

intercoolers made for the L67 superdcharged Grand prix, 12.468@108 on DR's, stock heads, cam, supercharger, no PCM tuning other than basic PCM upgrade . This was my own car

http://i9.photobucket.com/albums/a87/kssinbooth/GTP/Jeffs-IC-finished009.jpg

Custom alternator brackets for my twin turbo S-10 project. Has a built in tensioner. Along with idler bracket

http://i38.photobucket.com/albums/e143/97ZMeGo/S10%20Project/P31010030.jpg
http://i38.photobucket.com/albums/e143/97ZMeGo/S10%20Project/P21010029.jpg
http://i38.photobucket.com/albums/e143/97ZMeGo/S10%20Project/P10100281.jpg

Custom Cool Can made for Kyle A B4C Z's 575hp Magnuson Camaro

http://i38.photobucket.com/albums/e143/97ZMeGo/DSC05280.jpg

An all aluminum custom shift plate made for my dad's AC Cobra replica that i built.

http://i38.photobucket.com/albums/e143/97ZMeGo/DSCF0665.jpg

here's my FORGED LS1 build. progress pictures these parts actually went into the motor...

http://i9.photobucket.com/albums/a87/kssinbooth/RACE%20CAR/DSC00058.jpg
http://i9.photobucket.com/albums/a87/kssinbooth/RACE%20CAR/DSC00062.jpg
http://i9.photobucket.com/albums/a87/kssinbooth/RACE%20CAR/IMG_0406.jpg
http://i9.photobucket.com/albums/a87/kssinbooth/RACE%20CAR/IMG_0400.jpg

So in closing I'll like to make sure forest and breecher can accept my apology for the fact that I have no knowledge in building custom parts or building anything remotely close to a car that performs.

[Reverend Cooper]

Jeff= Big Pimp

[Lash]

Ouch....thats gotta sting.

[Korndogg]

hah

[BAD LS1]

heh i remember them engine assembly pics... Thats a real blowzilla in the first pic! Even if it will be a dyno queen, it sure looks mean!

[*SNOOP*]

so before you talk about beating a '10 second car ' maybe you should at least have a 10 second car

Referring to whom?

[nismodave]

http://i38.photobucket.com/albums/e143/97ZMeGo/DSCF0665.jpghttp://i195.photobucket.com/albums/z190/eliselzer/cletus-simpsons.jpg

"Thats one of dem fancy ashtrays!"

[nismodave]

Seriously, Jeff, you do some very nice work.:thumbsup

[pOrk]

Jeff= Big Pimp

:rolf:rolf:rolf

Good quality stuff Jeff, the alternator bracket looks burly as hell :thumbsup

[Flight_740]

We'll see


Not that I have anything cool but I'm just sayin.

[Breecher_7]

This thread has gotten way past its original intent. It went from somthing that I wanted to show board members because I thought was cool to a hate on the build thread.

I'll get back to you guys with the results when it hits the dyno and the track.

[Reverend Cooper]

i see no real haters breecher,but i do see responses to you esp. from Jeff and others in retort to what you posted. seems to me everyone for the most part thinks its cool some are skeptical as to the #'s and times your thinking it will do. let the car and its owner do the talking.

[Breecher_7]

i see no real haters breecher,but i do see responses to you esp. from Jeff and others in retort to what you posted. seems to me everyone for the most part thinks its cool some are skeptical as to the #'s and times your thinking it will do. let the car and its owner do the talking.

And thats what shall be done... :thumbsup

[forest]

Seriously, Jeff, you do some very nice work.:thumbsup

+1 very nice, and Katech makes a billet tensioner already so I don't have to :thumbsup I never said you didn't do nice work, just maybe theres more to this LSx than you think.

[UnderPSI]

You guys are all too funny. You all seem to care only about one thing, Time Slips. No one has ever even see this car running or at a show or anything and already everyone jumps on it..."my friends car will be faster" "you won't ever see 9's" WHO CARES. You know there is a chance that the car will never see the drag strip. That doesn't make it less of a car or poorly engineered. Give the car a chance, give Forest a chance. You guys are all set to kill mode. Something new comes along that you have no knowledge of the details and it scares you for some reason. Saying that you have a friend that can beat this at great lakes is great no one cares. Have them both meet at road america then see what happens. Probably a whole different story.

This is a car forum, not a drag race forum. It looks like a nice car. Not everything has to run fast in the quarter mile. If that was the case 2/3 of the people wouldn't be on here. So maybe give the car a chance. You might all be surprised and in a few months no one will remember this.


There are a lot of talented people on here. There are also a lot of amazing cars on here. Everyone is too quick to judge and they let their e-tempers flair. I am not asking you all to have a group hug, but relax a little. :goof

[juicedimpss]

I think that thing hooking on the bumper wouldn't touch 9's. Good luck though.


I got my money on the 76mm.

who has a 76?

[FourEyedFord]

who has a 76?

I think he is talking about Tom, BASLS1.
I could be wrong unless Larry has a turbo now too? :confused

[FourEyedFord]

You guys are all too funny. You all seem to care only about one thing, Time Slips. No one has ever even see this car running or at a show or anything and already everyone jumps on it..."my friends car will be faster" "you won't ever see 9's" WHO CARES. You know there is a chance that the car will never see the drag strip. That doesn't make it less of a car or poorly engineered. Give the car a chance, give Forest a chance. You guys are all set to kill mode. Something new comes along that you have no knowledge of the details and it scares you for some reason. Saying that you have a friend that can beat this at great lakes is great no one cares. Have them both meet at road america then see what happens. Probably a whole different story.

This is a car forum, not a drag race forum. It looks like a nice car. Not everything has to run fast in the quarter mile. If that was the case 2/3 of the people wouldn't be on here. So maybe give the car a chance. You might all be surprised and in a few months no one will remember this.


There are a lot of talented people on here. There are also a lot of amazing cars on here. Everyone is too quick to judge and they let their e-tempers flair. I am not asking you all to have a group hug, but relax a little. :goof

I think breecher's original post of the pictures was to stir the pot a little, which was successful. When you read that, "this guy or group should watch out", you have to expect a rebuttal to something like that, and then everyone has their boy's back.

I am just stating is all, you know what I mean mang? :thumbsup

[TraNs_aM]

man you guys can ***** about anything, even someones builds. Find something better to do with your time. Nice build BTW

i dont think this thread has anything to do with the build if u didn't notice the lil comment after the picture he was calling tom out

[HRSEPLA]

I think the very first post set the tempo.
Dude said 'butthurt':rolf

[TraNs_aM]

MR.T say's
"I pity tha foo that tries to race Bobby or Andy."
"ma money is on the mustangs sucka"

i'm not even a ford mustang guy but i put my money on the mustangs too dont doubt the power a ford puts out

[TraNs_aM]

Im sure he would run it, Ill ask tomorrow, but lets see it get tuned first......

might want tom to tune it for ya maybe it will run better :rolf

[forest]

I wont even go there haha

[GTSLOW]

Who Fords?

:rolf

[Reverend Cooper]

I think breecher's original post of the pictures was to stir the pot a little, which was successful. When you read that, "this guy or group should watch out", you have to expect a rebuttal to something like that, and then everyone has their boy's back.

I am just stating is all, you know what I mean mang? :thumbsup

no offense B-rad but he is right I'm with stupid^ lol

[Breecher_7]

no offense B-rad but he is right I'm with stupid^ lol

It wasnt a call out. It was a joke.... :thumbsup

That comment was takin WAY to seriously. :stare

[Reverend Cooper]

understood,but everyone has to understand the reaction to the thread.

[HRSEPLA]

And that reaction was...... 'butthurt' lol