PDA

View Full Version : FS: SBC goodies



350-Z28
04-14-2008, 11:25 AM
I have a bunch of parts in my basement that needs to not be there and needs to be sold.

Complete TPI ecu to manifold, runners in good shape. $450

Two small blocks, one a 350 4-bolt, the other 327 2-bolt. Both are complete but partially disassembled. Will not seperate, looking for $300 for the pair. Comes with an engine stand and a plethera of parts.

Cloyes Hex-ajust adjustable timing set new in box. $75

700-R4 out of an 86 camaro. $100

TCI Full manual reverse pattern valve body for the 700-R4 used but complete and not installed. $200, would pair the trans and valve body for $250

I think that's it I need this stuff gone as soon as it can leave. I'll even help deliver the stuff if that's an issue.

PM or call 262-352-0261

Thanks,
Andrew

Corvette Jabo
04-14-2008, 08:16 PM
OK, I will bite on the the engines. Can you provide the part casting numbers and date codes on the block, heads and intake? Also can you tell me if they have to original bore? Have any pics?
Jabo

350-Z28
04-15-2008, 02:31 PM
I'll get on that, I calle din to work tonight so I'll have the casting numbers up for ya, i have to find the heads and intake from the 350 since i took them off and tried selling them last year. I know the 350 came from a 76 suburban, whether or not that was its original home i have no idea. I'll get some pics and try to load them too. Do you happen to know if the 327's had the same bore as a 350?

Corvette Jabo
04-16-2008, 09:25 PM
Yes, a 350 CID and 327 CID both have a 4.00" Bore.
Jabo

350-Z28
04-17-2008, 12:47 PM
I thought so, i didnt get pics yet cause i was up until about 5am finishing up some fab work on the race car we're building so i should have them by tonight assuming the rest of the fab goes smooth. Sorry this is taking so long, that car has consumed my life and wrecked two relationships already. Isn't racing a blast?