PDA

View Full Version : Dyno Numbers



Nick
03-24-2008, 08:26 PM
Not too shabby for just a custom tune on a fully stock car.

Bone stock with custom tune with accessPORT

I'll scan the dyno graph in later.

Stock wheel HP/TQ: 218/246
AccessPORT & Custom Tune HP/TQ: 240/276

Very niiiice

http://bordumb.com/forums/uploads/monthly_03_2008/post-2-1206407031_thumb.jpg
http://bordumb.com/forums/uploads/monthly_03_2008/post-2-1206407046_thumb.jpg

0TransAm0
03-24-2008, 08:33 PM
nice. my cousin just got his sti back from some shop in chicago area. had them upgrade a bunch of stuff. he said it puts down 380 to the wheels on a street tune..

Nick
03-24-2008, 08:35 PM
Probably P & L Motorsports. That's where I was.

0TransAm0
03-24-2008, 08:40 PM
yeah i have know idea but they had his car for about a month and did a bunch of custom work to it.. he had some problems with it something about a hole in the intake and they took the whole motor out and apart to make sure metal shaveings didn't mess it up internally and while they were in there they upgraded a bunch of stuff..

Flicktitty
03-24-2008, 11:22 PM
Seems pretty good, what do you have done to the car?

HP ADDICT
03-24-2008, 11:33 PM
not to bad. I had mine tuned there. Intake and exhaust 306whp 331 ftlbs if i recall. jorge is the man.

Nick
03-25-2008, 12:40 AM
Seems pretty good, what do you have done to the car?

My initial post says bone stock. :thumbsup

Now it just has the custom tune though.

I have a Cobb mufflers coming though to give better sound and springs to lower it a bit and stop the huge sit down the rear end does when I hammer on the throttle..

Flicktitty
03-25-2008, 12:41 AM
My initial post says bone stock. :thumbsup

i musta been loosin it i thought it said nearly stock my bad.

Nick
03-25-2008, 12:42 AM
Not a problem! :)
*hug*

jbiscuit
03-25-2008, 07:41 AM
GOOD numbers! The car has to drive a lot better now too with a tune in it!!

CannotPost
03-25-2008, 08:30 AM
Not too shabby for just a custom tune on a fully stock car.

Bone stock with custom tune with accessPORT

I'll scan the dyno graph in later.

Stock wheel HP/TQ: 218/246
AccessPORT & Custom Tune HP/TQ: 240/276


Factory turbo cars are great, flash / tune only 22hp and 30tq! Awesome :thumbsup

Where is this dyno? How much for your time there? How was the fan / cooling situation? Is that silver tube providing cold air to the IC?

Nick
03-25-2008, 08:39 AM
This was at P & L Motorsports in Franklin Park, IL. Right by O-Hare
http://www.pandlmotorsports.com/

Cooling situation was fine. I was actually really cold with all of the wind blowing around in that area and yes, that silver ductwork was pumping cold air to the top mount. :)

CannotPost
03-25-2008, 08:43 AM
This was at P & L Motorsports in Franklin Park, IL. Right by O-Hare
http://www.pandlmotorsports.com/

Cooling situation was fine. I was actually really cold with all of the wind blowing around in that area and yes, that silver ductwork was pumping cold air to the top mount. :)

Very nice, and COOL! Any other plans to make more power?

ND4SPD
03-25-2008, 08:43 AM
Factory turbo cars are great, flash / tune only 22hp and 30tq! Awesome :thumbsup

Where is this dyno? How much for your time there? How was the fan / cooling situation? Is that silver tube providing cold air to the IC?

+1

jbiscuit
03-25-2008, 08:51 AM
time for a DOWNPIPE!

Nick
03-25-2008, 09:57 AM
I was going to install a cobb downpipe on Friday night but those plans were toasted by the weather. I had already scheduled the tune and just wanted it done so there was no time in between to get the down pipe on unfortunately. I'll just wait for a while. I'll probably upgrade to an AVO top mount intercooler next. Cobb exhaust system is on the way along with springs.

Nick
03-25-2008, 09:58 AM
+1


This was at P & L Motorsports in Franklin Park, IL. Right by O-Hare
http://www.pandlmotorsports.com/

Cooling situation was fine. I was actually really cold with all of the wind blowing around in that area and yes, that silver ductwork was pumping cold air to the top mount. :)

jbiscuit
03-25-2008, 09:59 AM
I was going to install a cobb downpipe on Friday night but those plans were toasted by the weather. I had already scheduled the tune and just wanted it done so there was no time in between to get the down pipe on unfortunately. I'll just wait for a while. I'll probably upgrade to an AVO top mount intercooler next. Cobb exhaust system is on the way along with springs.

werd! Hope to see the car out and about this summer! :thumbsup