View Full Version : Some ls1 valvetrain goodies

02-18-2008, 07:24 PM
Rev 1.60 ss exhaust valves $50

Prc dual valve springs, good to .660, brand new with valve seals and seats. $175

Mti X1 camshaft, has some pitting on one of the lobes from a lifter going bad, could possibly be smoothed out or reground. 230/227 .591/.571 112 lsa $60

May have some more stuff available if the potential buyer flakes out.....

02-18-2008, 09:29 PM
The prc springs the golds? do you know? Titanium reatainers also with them?

02-18-2008, 09:52 PM
I have heard the prc's are the same as the patriot golds, but they are silver in color.

I bought them to replace my existing prc springs when I dropped my reworked 5.3 heads off to be freshened up. Turns out my valve guides were f@cked, they used the wrong sized exhaust valve/ seat combo and 2 of the intake valve seats basically fell out of the head:mad: That was my first and probably last budget cylinder head experience.

The heads are now stripped down to nothing, someone is interested in them, if he doesn't need the used spring kit I can give you the titanium retainers for a little more. If not call tsp, find out how much for the retainers alone and I will make sure the entire setup costs you less than the 289 they get for it, deal:D

I bought these in january sans retainers for 200 fwiw.

02-20-2008, 06:43 AM
Ok I can sell the springs with ti retainers, so it will be a full kit for $240 firm, crisp american dollars, euros or even canadian:goof

02-20-2008, 12:45 PM
PM sent

02-20-2008, 01:33 PM
I could use those springs.... Let me know if the others fall thru.