Need T bolt HI Pressure clamps ASAP!!!

[BAD LS1]

Turned the wick up to 15 psi on the car for the first time tonight and found the weak link in the plumbing right off the bat!

I had a plumbing but connector with worm clamps holding a stright joint together, well it keeps coming apart there every time i let off to shift, the BOV is working. I can pull the connection apart by hand though:wooo

Does anyone have QTY 2 3" t bolt high pressure clamps and a 3" x 3" long section of silicon tubing if possible too.

Or does any place locally sell these things that are open on saturdays?

If anyone has some laying around that i could come purchase from you or whatever that would be awesome as i wont be able to dyno this thing sunday w/o this.


http://www.breezeclamps.com/images/tbolt.gif

[UnderPSI]

NAPA has them. You have to ask for them though, They don't have them out. I got some from the Napa in New Berlin on Moreland rd. They have both the t-bolt style and the heavy duty style with the bearings in them for the uber tighten.

[BAD LS1]

Awesome!, thanks Brad!

[SLOWC5]

its a little late now but fuel systems probably has everything you need

JEFF

[hotshift13]

I have a box of random stuff like that if you need something. Changed my intercooler pipes 4 times in 4 years.

[Holeshot]

Tom if your in Milwaukee and need it still call me at the store. I am there all day
Call me early so if I need to get something from the warehouse I can have it by 11 am.
414 762 NAPA

Dan

[DoubleAron]

I have 1-3X2.50 coupler and then I have a T-bolt clamp with a 3" min. dia. I have plenty of the 3.25 size but I know that will to big.

[GRNDNL]

I've got clamps also Tom......I've got 3" hose also, its not silicon hose though, I've never had any luck with that stuff, always blows off on my car. Is there a bead on the end of the tubing your trying to clamp together?...

I'll be at work all day today....262-367-8000..

[Teufelhunden]

I have a couple 3" clamps as well. If for some reason you cant find any...moparscott at gmail dot com

[BAD LS1]

Thanks for the responces guys, i actually got an exhaust butt joint band clamp i had laying around to work perfect!

This thing is fukkin stupid on 15 psi! 2nd gear is instant rev limiter when boost hits, 3rd gear gets sideways @ 70 when boost hits and slowly hooks and just yanks your eyeballs out the back of ur head.

lol this is nothing new to some of you mustang guys but this is wild to me!

No methanol yet as i need another hobbs switch (8-10 psi) so ive got a race gas/93 mix to keep it safe.

only 18 degrees of timing still, no knock and 11.4 afr and 15 psi is where im at. on straight 93 with this same setup i was seeing small knock @ 5 grand but not bad for a 10.0:1 motor! That tells me there is a shit ton left once the methanol can be used. Stay tuned for 20 psi yet in the coming week!

[Car Guy]

Sounds awesome, how much to take me for a ride...??? :thumbsup






:3gears::3gears::3gears: