PDA

View Full Version : new south sider project......


sloLs1
05-20-2007, 03:36 PM
better watch out Norf side:devil ............


http://i22.photobucket.com/albums/b320/StrokedEVO/Picture456.jpg
Russ Jerome
05-20-2007, 03:39 PM
GM HEI distributor loosly laying ontop of a 2.0?

Should have jammed a LS1 pan in lower wheelwell
opening for the full effect :)
sloLs1
05-20-2007, 04:50 PM
GM HEI distributor loosly laying ontop of a 2.0?

Should have jammed a LS1 pan in lower wheelwell
opening for the full effect :)

well it had a 1.9L

and i geuss it is a little hard to see the pan......
Brandon W.
05-20-2007, 04:58 PM
so whats going on with the car? or is this a different red saturn?
sloLs1
05-20-2007, 09:00 PM
so whats going on with the car? or is this a different red saturn?


well its the same saturn as before... the original motor out of this one is goin in my other DD saturn.

and well it's getting another new motor/trans/and yes a rear end:devil
Beagle
05-20-2007, 11:18 PM
here we go again..........
lilws6
05-21-2007, 08:10 AM
YEA REAR WHEEL DRIVE SATURN Twin turbo V8 for the win
rally_scort
05-21-2007, 08:16 AM
haha, when we stopped by the shop and you mentioned the swap, i thought u were joking.Maybe after you get the satty done, we can get the wagon under the knife. :thumbsup
juicedimpss
05-21-2007, 08:26 AM
nice photoshop
sloLs1
05-21-2007, 12:36 PM
YEA REAR WHEEL DRIVE SATURN Twin turbo V8 for the win

trust me more than enough room under the hood for a pair of twins.....





haha, when we stopped by the shop and you mentioned the swap, i thought u were joking.Maybe after you get the satty done, we can get the wagon under the knife. :thumbsup


its not as easy as i make it look/sound:durr but if you'd like some assistance i am here to help!




nice photoshop


thank you... it aint easy doing real life choppin and droppin motor swaps:rolf
sloLs1
05-21-2007, 02:35 PM
you asked, you get.

THIS IS NOT WHERE ITS BEING PERMENTLY MOUNTED. i just lowered it partialy in there to get a quick shot.... i still need my trans in order to mount it! still needs to go down 2-3inches and back about 2-3inches. a little cutting of the front upper and lower supports will make room for the oil pan and the acc.

http://i22.photobucket.com/albums/b320/StrokedEVO/sspro/Picture457.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/sspro/Picture459.jpg
Waver
05-21-2007, 03:51 PM
good luck with that.....
Prince Valiant
05-21-2007, 03:56 PM
ouch...that looks hard. I'd just go for a vega or something. Good luck!
sloLs1
05-21-2007, 05:34 PM
ouch...that looks hard. I'd just go for a vega or something. Good luck!

i could had a '74 vega... but it was too molested for me... for tube chaissis and the whole 9 yards..... i rather do something that has never been done before!
Lash
05-21-2007, 06:11 PM
You keeping the little itty bitty unibody?
sloLs1
05-21-2007, 07:09 PM
You keeping the little itty bitty unibody?


well parts of it:shades
hotshift13
05-21-2007, 08:04 PM
That dosn't go in that car!!! Glad someone has the balls to do stuff like that. good luck. Ive got an Rx7 that I ve got a 5.0 motor in it, boy have we gotten a bunch of flak on that one.
sloLs1
05-21-2007, 09:47 PM
That dosn't go in that car!!! Glad someone has the balls to do stuff like that. good luck. Ive got an Rx7 that I ve got a 5.0 motor in it, boy have we gotten a bunch of flak on that one.


:headbang


it will be intresting!
Beagle
05-21-2007, 10:47 PM
you know theres no bringing the satty back after this project.
Slow Joe
05-21-2007, 10:47 PM
That dosn't go in that car!!! Glad someone has the balls to do stuff like that. good luck. Ive got an Rx7 that I ve got a 5.0 motor in it, boy have we gotten a bunch of flak on that one.

I've always wanted to do that... Is it a hard conversion, or do they make swap kits now a days?? And by 5.0 you mean 302, right?
boostaddict14
05-21-2007, 11:44 PM
lol looks like this one is gonnabe a long haul
Flicktitty
05-22-2007, 02:42 AM
are you ******* joking me?

That is by far the coolest thing i have ever seen in my life!
SmokinRAM114
05-22-2007, 07:35 AM
slo ur nuts. good luck with it any way. im sure youll get it done as seen with all the other projects you have started and finished. Sad part is you will probly have it done by august lol
sloLs1
05-22-2007, 10:35 AM
slo ur nuts. good luck with it any way. im sure youll get it done as seen with all the other projects you have started and finished. Sad part is you will probly have it done by august lol


:thumbsup

i will hit a minor set back if the offer i put in on a house gets accpeted next week... but most likely wont:(

but i do plan on having it running and driving befor GLD closes to make a few sake down runs this year:headbang

i will have up dates soon.... i've been really busy lately with work and home searching soooo once i get my trans mid next month i'm sure this will be well on its way!
SmokinRAM114
05-22-2007, 12:42 PM
what are you running? turbo 400?
sloLs1
05-22-2007, 04:42 PM
th350 full man. reverse and a decent size stall:devil
Beagle
05-24-2007, 08:52 PM
^^^^^nice, that will be fun. how big of a stall will the satty see?
sloLs1
05-24-2007, 09:54 PM
^^^^^nice, that will be fun. how big of a stall will the satty see?

well for starters a 3k... seeing the motor makes most of its power down low... but later on with a different cam/heads/n2o it will get a different stall:thumbsup
Beagle
05-25-2007, 12:39 AM
well for starters a 3k... seeing the motor makes most of its power down low... but later on with a different cam/heads/n2o it will get a different stall:thumbsup

bwahahahahahahahahaha!!!!!!! thats going to be crazy. while your waiting for the trans you should fab up a cage for it just to top it off :thumbsup
sloLs1
05-25-2007, 07:17 AM
bwahahahahahahahahaha!!!!!!! thats going to be crazy. while your waiting for the trans you should fab up a cage for it just to top it off :thumbsup

if i had a pipe bender it would have already been done.......
SmokinRAM114
05-25-2007, 07:45 AM
if i had a pipe bender it would have already been done.......


buy a tube shark. they're not as expensive as you would think. my buddy has one. when he bought it he got to chose one die for free. he got a 1.5" to be safe for his offroad zuk. just make sure u go bigger on the anchors then what they tell you. we ripped it out of the floor twice now. 2nd time breaking the crete:rolleyes:
sloLs1
05-25-2007, 08:58 AM
buy a tube shark. they're not as expensive as you would think. my buddy has one. when he bought it he got to chose one die for free. he got a 1.5" to be safe for his offroad zuk. just make sure u go bigger on the anchors then what they tell you. we ripped it out of the floor twice now. 2nd time breaking the crete:rolleyes:


i was looking into those... we had one at wyotech... worked alright.



and yes with unibody the mounting plates need to be the size of a dinner plate!