PDA

View Full Version : Wtb: Tpi Ecu



350-Z28
05-04-2007, 09:53 AM
Yep finally got myself a TPI but no harness or ECU, looking for an ECU with the prom so i can chip it. Preferably a MAF set up since that's what it originally was but since it hasn't been installed I could do a speed density conversion. If you have one or know of one or totaled your Fbody let me know I need that ECU, will be going with a painless harness,

Poncho
05-04-2007, 12:04 PM
so you need an 85-88 setup?

i got one, I'll see what the old man will want for it.

350-Z28
05-04-2007, 01:54 PM
Awesome I appreciate it. One quick question is that ecu for the 5.0 or the 5.7? It doesn't much matter since I'll be chipping it but just out of curiosity.

Poncho
05-04-2007, 03:32 PM
5.7 wasn't till 87, and it really don't matter, only difference is that the 350 had a slightly different timing curve and larger injectors. i ran my 355 on a 305 tune for a bit.

BLUTO
05-04-2007, 04:00 PM
I got both-computer&harness $100 and its yours.

350-Z28
05-04-2007, 11:43 PM
Find out what he wants for it Judge.

Bluto what engine/fuel management is it?

BLUTO
05-05-2007, 09:59 AM
305TPI/maf setup.....Ill see what year it was from.

350-Z28
05-05-2007, 05:00 PM
Eh the year doesnt matter too much to me. The car its goin in is an 88 but was originally a 2.8. Is the harness for an automatic or shouldn't that matter?

Poncho
05-05-2007, 07:44 PM
it needs to be 85-88 for your car.

remember these have just an engine harness, not a computer controlled tranny.

350-Z28
05-05-2007, 08:50 PM
I wasn't sure about that,this is my first automatic build and first TPI, I knew it needed to be 85-88 but between that I don't care and doubt the car will as it's gaining a few cylinders and some cubic inches. Happen to find out how much the old man wants for it?

Poncho
05-05-2007, 08:55 PM
haven't had time.

350-Z28
05-05-2007, 08:55 PM
Gotcha, whenever you get a chance man

Poncho
05-06-2007, 04:33 PM
262-457-4527

ask for Orfelio

or-fell-e-Oh

PB86MCSS
05-06-2007, 04:49 PM
89' is also a MAF year, for the PROM make sure its not from a VATS equipped car, so that knocks 89' and I think 88' out. The PROM should also be from an automatic car. And 85' is a different style ECM and harness, just an FYI...its been awhile since I thought about TPI stuff but I retained some knowledge of my swap and trouble shooting with it :D.

Poncho
05-06-2007, 06:31 PM
89' is also a MAF year, for the PROM make sure its not from a VATS equipped car, so that knocks 89' and I think 88' out. The PROM should also be from an automatic car. And 85' is a different style ECM and harness, just an FYI...its been awhile since I thought about TPI stuff but I retained some knowledge of my swap and trouble shooting with it :D.

'89+ is VATS.

BadAzzGTA89
05-06-2007, 07:56 PM
89' is also a MAF year, for the PROM make sure its not from a VATS equipped car, so that knocks 89' and I think 88' out. The PROM should also be from an automatic car. And 85' is a different style ECM and harness, just an FYI...its been awhile since I thought about TPI stuff but I retained some knowledge of my swap and trouble shooting with it :D.

89 is the first year for the VATS but you can bypass the VATS system
And i have a ECM if ya need one!

350-Z28
05-07-2007, 12:47 AM
Holy god where were you guys before i put the 84 down? Badazz what year ECM/how much? Waiting on info from Bluto and Judge I'll give him a ring tomorrow after I'm out of school.

Poncho
05-07-2007, 01:11 AM
already gave you my info for my dad.

BLUTO
05-07-2007, 10:56 AM
What else did you need to know?

350-Z28
05-07-2007, 11:29 AM
Just the year was all i needed

BLUTO
05-07-2007, 11:42 AM
OK, Ill look tonite

BLUTO
05-07-2007, 09:26 PM
OK, Ill look tonite


From an 86 IROC:headbang

350-Z28
05-08-2007, 12:09 AM
Sweet deal. You said it was engine harness only and no trans BS right?

BLUTO
05-08-2007, 09:02 AM
Sweet deal. You said it was engine harness only and no trans BS right?

yes, complete harness & computer

Poncho
05-08-2007, 09:13 AM
my dad also has the complete TPI setup as well.

he's got tons of parts layin' around

some 15x8 cragar SS's, '55 bel air vert and HT doors, '55 grille, i know somewhere theres a bunch of original "rallye" center caps for rallye wheels, that TPI setup, '83 Z/28 'glass hood, a complete 351 out of a late 70's or so set of original, low mileage '69 Camaro 396 heads.

damn, he's got alot of shit layin' around.

BLUTO
05-08-2007, 08:53 PM
yes, complete harness & computer


Sooo, You want to buy this???

350-Z28
05-09-2007, 12:42 AM
Yeah when's a good time to purchase it?

BLUTO
05-09-2007, 10:43 AM
Yeah when's a good time to purchase it?


PM sent:)