Crawlin
03-06-2007, 12:34 PM
FAST Engine Management System
Build date of 6/25/02, so it's not the XFI system
Part # 30-113010
Listed as a Bank-to-Bank EFI Management system
Listed as an "Inductive Pickup w/ wideband oxygen sensing option installed"
So:
First Number: number "1" means it's a B2B delivery, firing the first half the injectors every 180* of crank rotation
Second Number: number "1" means it's a system w/ ECU, main and injector wiring harness, C-Com WP software, manual on disk and 5-ft communication cable.
Third Number: number "3" means inductive pickup ignition, racing crank trigger ignitions and magnetic pickup distributors
Fourth Number: number "0" is for the nitrous options, but the B2B system controls IAC, FAN, Fuel pump, and single stage nitrous
Fifth Number: number "1" is for the WOT closed loop option, and the 1 designations it has the wide band sensor
Sixth Number: number "0" means there is no option for individual cylinder spark timing and fuel control
I do have the ECU datalogger box as well as an eDIST box if you wanted to use it on an LS1/LS6 setup. I also do have the disk for the installation programming for your laptop/computer. Like mentioned above, it does have the 5 ft. communication cable.
Instruction manual is available on the FAST website www.fuelairspark.com
$700
Build date of 6/25/02, so it's not the XFI system
Part # 30-113010
Listed as a Bank-to-Bank EFI Management system
Listed as an "Inductive Pickup w/ wideband oxygen sensing option installed"
So:
First Number: number "1" means it's a B2B delivery, firing the first half the injectors every 180* of crank rotation
Second Number: number "1" means it's a system w/ ECU, main and injector wiring harness, C-Com WP software, manual on disk and 5-ft communication cable.
Third Number: number "3" means inductive pickup ignition, racing crank trigger ignitions and magnetic pickup distributors
Fourth Number: number "0" is for the nitrous options, but the B2B system controls IAC, FAN, Fuel pump, and single stage nitrous
Fifth Number: number "1" is for the WOT closed loop option, and the 1 designations it has the wide band sensor
Sixth Number: number "0" means there is no option for individual cylinder spark timing and fuel control
I do have the ECU datalogger box as well as an eDIST box if you wanted to use it on an LS1/LS6 setup. I also do have the disk for the installation programming for your laptop/computer. Like mentioned above, it does have the 5 ft. communication cable.
Instruction manual is available on the FAST website www.fuelairspark.com
$700