i did it....

[sloLs1]

i got another LS1:banana1: :banana :banana1:

its a '99 z-28 with a ss hood/spolier/wheels

just turned 40k miles!

6-speed manual, Arctic white/Graphite Leather, T-tops, Hurst Billet Plus shifter. Performance equipment installed (by Speed Inc. in Schaumburg, IL) includes: Dynatech Stainless long-tube headers with high-flow catalytic converters, SLP dual-dual exhaust, LS6 intake manifold, Whisper high flow intake lid, Koni Single Adjustable “yellow” shocks, Addco 35mm hollow front sway bar, SLP subframe connectors and BMR shock tower brace. Dynotuned by Speed Inc, 330 rwhp, 340 rwtq.

here are a few pics... this is when i just got back from driving 2hours from IL.

its dirty, but soon to be cleaned and put away till spring!

http://i22.photobucket.com/albums/b320/StrokedEVO/Picture256-1.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture257.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture258.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture259.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture260.jpg

[Waver]

Looks good man, you going to run it at all?

[sloLs1]

Looks good man, you going to run it at all?

in spring... soon after GLD opens

[Waver]

I wanna grab a lane against you......you will smoke me, but I think it will be fun anyhow.....race for a brat?

[Poncho]

I'll grab a lane too. Nothing can beat an f-body. Thats sure a nice ass looking car.

plans??? cam? heads? nitrous? hemi swap? 2jz swap?

[Beagle]

do i have to beat the satty before i get a shot at the camaro lol. i was hoping you were gonna take it out when we left the shop, oh well car looks awesome! it'll be a fun summer.

[WhiteZCamaro]

Awsome car good color too!!:shades

[UnderPSI]

That's really nice. It would look good with the Black C6 wheels I have :thumbsup

[GTSLOW]

Nice lookin car.

[BAD LS1]

Nice car! Maybe have to have me take a look at the tune up! Should be closer to 350-360 with the long tubes.

Enjoi!

[Lash]

Nice looking ride!

[946speedz]

if you dont mind me asking, what did you pay for it?

[sloLs1]

thank you all for the comments!


Nice car! Maybe have to have me take a look at the tune up! Should be closer to 350-360 with the long tubes.

Enjoi!



i am pretty sure the guy i bought it from said it was tuned for street use... so more on the safe side! but i plan on a cam an possibly heads so i will be talking to you if i go through with that!



if you dont mind me asking, what did you pay for it?



lets say it was a rich older guy, he only drove it 3000 miles last year, and he lives in IL. i got a good deal! under $10,000 and above $8,000 :devil

[97z2801ss]

Congrats man!

[PHDcamaro]

looks good.... i love white Z's

[946speedz]

damn why do i never see these deals, i just pay under 10 and over 8 for an LT1 bwahahahha what was i thinking? was this a friend or an aquaintance just wondering cause thats a hell of a deal

[GTSLOW]

i just pay under 10 and over 8 for an LT1 bwahahahha


:wtf x10000000000

[946speedz]

hahahah damn you blk02 :) although its a vert w/less miles and all stock so im happy.......

[WilliamZ]

Very nice!!!

[Junky Giorgio]

CLean whip!

[sloLs1]

damn why do i never see these deals, i just pay under 10 and over 8 for an LT1 bwahahahha what was i thinking? was this a friend or an aquaintance just wondering cause thats a hell of a deal

just happened to stumble across it... dont even know the guy. i will post some pics tonight of it freshly washed! :headbang

[sloLs1]

http://i22.photobucket.com/albums/b320/StrokedEVO/Picture271.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture272.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture273.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture274.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture275-1.jpg
http://i22.photobucket.com/albums/b320/StrokedEVO/Picture269.jpg

[MurphysLaw88GT]

^^^^^Nice!!!

[Poncho]

did they all come w/ black mirrors? that looks so out of place.

good deal getting one w/ ss parts though.

[Nix]

Ttops or hardtop? Sweet ride:thumbsup

[Beagle]

it looks sweet as hell. what are you planning to do to it????

[BAD LS1]

Black mirrors were on 99 and older cars which got the painted door handles though, 00+ is when they started painting the mirrors and using the wheels that are on it now.

That is a really nice car and a sweet deal! It looks almost like Joe's old car (JC70SS)

[GTSLOW]

did they all come w/ black mirrors? that looks so out of place.

good deal getting one w/ ss parts though.

Just noticed that too. I'm sure a body shop could do it for a decent price. The headers look sick!! That system is expensive as fook. I love the SS hood/spoiler too!!!

[juicedimpss]

looks good.
i need an ls style front end for mine,that looks cool

[JC70SS]

ah the memories!!

[Flicktitty]

i like it! nothing better then a clean white car!

have fun with it!
finally your S/N fits you again.

[Beagle]

I agree! "arctic white" is my favorite color on a camaro.

[sloLs1]

Ttops or hardtop? Sweet ride:thumbsup

t-tops:thumbsup



i like it! nothing better then a clean white car!

have fun with it!
finally your S/N fits you again.

i know, i was going to change it but lucky i didnt!




it looks sweet as hell. what are you planning to do to it????


heads/cam/supporting mods for this spring/summer:devil
then prolly go turbo next year:banana

[Beagle]

heads/cam/supporting mods for this spring/summer
then prolly go turbo next year

I hate you! lol thats going to be insane.

[GTSLOW]

t-tops:thumbsup




i know, i was going to change it but lucky i didnt!






heads/cam/supporting mods for this spring/summer:devil
then prolly go turbo next year:banana

Whens the 12bolt & Built t56 going in? Oh btw you better not swap to a auto like some of the other weenies. :goof

[sloLs1]

Whens the 12bolt & Built t56 going in? Oh btw you better not swap to a auto like some of the other weenies. :goof

no auto for me!!! only time i'd ever run an auto is if i was building an all out drag car where consistency counts.

This is a play car!:banana


i am not going with a 12bolt... i'm prolly going with mosor 31spline axles and some kind of beefy locker and c-clip elims. should be fine for this summers plans:D same with the trans... but if she goes, she goes. then i build:devil


i hate building something up before i get to see how much it can take:goof

[BAD LS1]

A solid crush sleeve in the 10 bolt and shimmed up tight with a support cover and a decent set of gears (GM 4.10's work best and most quiet) they last pretty long even with slicks. It will last a really long time on street tires with those mods. It should have the decent Torsen LSD in it now. Everything 98 and older had the auburn "blow apart master" LSD in it.

All the trans will need is newer clutch hyraulics and the drill mod to be consistant.

Turbo heh?? front or rear mount bullshit? haha Im going with 3 electric
superchargers in series this year.:wow

[sloLs1]

A solid crush sleeve in the 10 bolt and shimmed up tight with a support cover and a decent set of gears (GM 4.10's work best and most quiet) they last pretty long even with slicks. It will last a really long time on street tires with those mods. It should have the decent Torsen LSD in it now. Everything 98 and older had the auburn "blow apart master" LSD in it.

All the trans will need is newer clutch hyraulics and the drill mod to be consistant.

Turbo heh?? front or rear mount bullshit? haha Im going with 3 electric
superchargers in series this year.:wow

damn... 3:wooo

ahaha... if i went turbo it would definatly be a single "front mount" turbo... i am just hoping by this winter i will be able to get a tig welder and have some "weld time" under my belt so i can make my own shit. I wouldnt want to use mild steal and a mig welder.... i want that sexy Stainless steel/tig welded look!:headbang

[Korndogg]

u gonna ghost ride that shit or what dude.

[GTSLOW]

damn... 3:wooo

ahaha... if i went turbo it would definatly be a single "front mount" turbo... i am just hoping by this winter i will be able to get a tig welder and have some "weld time" under my belt so i can make my own shit. I wouldnt want to use mild steal and a mig welder.... i want that sexy Stainless steel/tig welded look!:headbang

Niice!! I think the do it yourself peeps use truck many's for headers. I think welding up custom ones would be a ***** on these cars.

[sloLs1]

..... I think welding up custom ones would be a ***** on these cars......


i like challenges!:durr

[GTSLOW]

i like challenges!:durr

Sweet keep us posted!! Any idea what cam/heads ur goin with?

[sloLs1]

Sweet keep us posted!! Any idea what cam/heads ur goin with?


nope... havent really looked into it yet.... i want to drive it and get back into the swing of things again. so i will prolly wait till summer to do it. by then i will have done more research. with my last camaro i was going to go with patriot stage 2 heads.... but that was because i got them cheap. so now... who knows!!!

any suggestions?!? i am looking for a nasty torque house will a nice low to mid power. i dont really want to lose the top end though:durr . i know thats hard to do but i am really intriged by that V3 cam that someone else put in their ls1 pn this forum. it's specs are pretty nice looking! maybe i will wait to see how his turns out:headbang

[BAD LS1]

i am really intriged by that V3 cam that someone else put in their ls1 pn this forum. it's specs are pretty nice looking! maybe i will wait to see how his turns out:headbang


Im assuming it should turn out well, ive yet to tune it, but that car was an absolute weapon with just stock internals and headers and my tune up, it was REALLY quick. So im sure this car will continue to be a freak with this cam in it too.

[sloLs1]

Im assuming it should turn out well, ive yet to tune it, but that car was an absolute weapon with just stock internals and headers and my tune up, it was REALLY quick. So im sure this car will continue to be a freak with this cam in it too.


excellent:D

cant wait till spring/summer!

[GTSLOW]

any suggestions?!? i am looking for a nasty torque house will a nice low to mid power. i dont really want to lose the top end though:durr . i know thats hard to do but i am really intriged by that V3 cam that someone else put in their ls1 pn this forum. it's specs are pretty nice looking! maybe i will wait to see how his turns out:headbang

Ah the TSP Torquer cams are awsome!! I was looking at the V2 for a while but the V3 seems sweet too.