FS: camel hump fuelie heads

[88Nightmare]

Ebay ads. 2 sets of heads.

This set is casting number: 397186
These heads have the accessory holes.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMESE%3AIT&viewitem=&item=180081164047&rd=1&rd=1

This set is casting number: 3890462
These heads do not have the accessory holes.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMESE%3AIT&viewitem=&item=180081165902&rd=1&rd=1

Both sets of heads are bare, however both sets have been baked to remove old paint, sandblasted, and magnafluxed. All head work has been done by Brian at Extreme Speed LLC in Oak Creek.

[88Nightmare]

someone had asked me a question on ebay regarding the heads. The user name is memphis0703 from wisconsin. If I had to guess, I might think it was memphis on here.

Anyway, if it is BCM memphis, I would be more then happy to provide that information, but where on the cylinder heads is that located?

[YENKO4ME]

how much for all 4 heads i need asap:stare

[88Nightmare]

prices are on the ebay auction. buy it now for $200 each set. I can't negotiate on that price because technically these heads are my brothers, so I have no discretion on negotiating. I don't think he will budge on price either.

[Poncho]

those were awesome heads back in the day, i believe he has a set on the top of his '55 bel air, unless there are some other "fuelie" heads from a 327 vette.

[88Nightmare]

they still are awesome heads. one of the best on a small block chevy. they seem to be getting harder to find, we just dont have a use for em.

[Corvette Jabo]

The 186 heads, are they the 1.94 / 1.50 or 2.02 / 1.60 Valve Size (in.) Intake / Exhaust? They look like the smaller valve heads. And, are they both dated L159?
Jabo

[88Nightmare]

3927186 heads: L159
3890462 heads: D66

both are 1.94/1.50 valves

[Corvette Jabo]

3927186 heads: L159
3890462 heads: D66

both are 1.94/1.50 valves


So both sets of heads have the exact same casting dates?

[88Nightmare]

no dude, didnt you read what I typed? lol

the 3927186 heads, which are the accessory heads, are casted with date L159.

the 3890462 heads, which are the non accessory heads, are casted with date D66.

Quote:
Originally Posted by 88Nightmare
3927186 heads: L159
3890462 heads: D66

both are 1.94/1.50 valves

[Memphis]

I think he wants to know both accessory hole heads have the date L159 and both the non accessory heads are dated D66.

[88Nightmare]

ooo, yes both accessory heads are matching, and both non accessory heads are matching. sorry, I didnt understand.

[Corvette Jabo]

ooo, yes both accessory heads are matching, and both non accessory heads are matching. sorry, I didnt understand.

Sorry, next time I will try to type a little slower. I didn't know you couldn't read that fast..........

[YENKO4ME]

SO you can type that fast ?
you want $200 per set for some 194 size valve with lumps on them like the 202 head had so that when some looks at them it will look fast ?

[88Nightmare]

SO you can type that fast ?
you want $200 per set for some 194 size valve with lumps on them like the 202 head had so that when some looks at them it will look fast ?

i dont really understand what the hell you are talking about, and frankly I dont give two shits. if ya buy em, great, if ya don't thats fine too. im not gonna sit here and go back and forth with you.

[Corvette Jabo]

I wasn't trying to give you crap, I just wanted to confirm that the 186 heads had the exact same date code casting on both heads. Its kind of rare when some one has two sets of heads with matching date castings.
Also, only the 2.02" are considered to be the fuelie heads.

Jabo

[88Nightmare]

I underatand you werent, I just dont like yenko. and if they aren't technically fuelie heads, well then I learned somethin new. But each set of heads matches, but both sets do not have the same date code.

[YENKO4ME]

I just saying that fuelie heads are good and would pay $200 per pair. but 194 heads on the in side and lumps like the fuelie heads on the out side only make a good looking motor . and im not going to give you any cash to make my motor look better ? put new valves in them 202 size a i will buy all 4
and im so sorry that you dont like me . i didnt do any thing to you .i just wouldnt sell you my truck for the price you wanted to give me . next time i will just pay you to take it off my hands ?

[88Nightmare]

the heads are what they are. im not going to pay to have them machined to your liking. either ya buy em or ya dont. sorry if they arent what you wanted. better luck next time.

[YENKO4ME]

the heads are what they are. im not going to pay to have them machined to your liking. either ya buy em or ya dont. sorry if they arent what you wanted. better luck next time.

you make laff out loud thanks i dont need them at all gust goofin with you good luck selling them :rolf

[88Nightmare]

do you have tourett syndrome or somethin? you type like a twacked out drug dealer.