View Full Version : Part numbers needed!
GTSLOW
01-30-2007, 10:14 AM
Trying to get some small stuff fixed:
02 fbody LS1 Water pump
Front and Rear Knock sensors
Intake manifold gaskets for sensor swap
Thanks!
DSMDuDE
01-30-2007, 10:28 AM
Ill have you prices in about 10 mins :)
DSMDuDE
01-30-2007, 10:38 AM
Knock Sensors = 12589867 x 2
W/PUMP = 89017593 incls gasket and t-stat
intake gaskets = 12533587 incls 8 seals
SEAL,INT MANIF = 12560251
If you would like some pricing from me..Just shoot me a PM
Thanks
Nick A.
GTSLOW
01-30-2007, 01:33 PM
Sweet so the sensors are the same for the front and rear?
+1 for you dewd!
DSMDuDE
01-30-2007, 01:51 PM
Thanks!
Front and rear sensors are the same, yes
theavenger333
01-30-2007, 06:18 PM
gmpartsdirect?
DSMDuDE
01-30-2007, 10:41 PM
I work at a GM parts Department
theavenger333
01-31-2007, 02:17 AM
i realize this, i was pointing out Nanny's laziness
A B4C Z
01-31-2007, 06:51 PM
Just for a little FYI. Most of the water pump leaking is due to bad gaskets. So take a close look. I havent seen many acutally leak out the weep hole is mainly the gaskets(ls
-x based cars/trucks) 100+dollors vs. 6.00. Id take a closer look.
Kyle
GTSLOW
02-01-2007, 10:26 PM
Just for a little FYI. Most of the water pump leaking is due to bad gaskets. So take a close look. I haven't seen many actually leak out the weep hole is mainly the gaskets(ls
-x based cars/trucks) 100+dollars vs. 6.00. Id take a closer look.
Kyle
Ya it was originally leaking from the gaskets. Now its just got that god awful lsx water pump squeak.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.