PDA

View Full Version : Part numbers needed!



GTSLOW
01-30-2007, 10:14 AM
Trying to get some small stuff fixed:

02 fbody LS1 Water pump
Front and Rear Knock sensors
Intake manifold gaskets for sensor swap

Thanks!

DSMDuDE
01-30-2007, 10:28 AM
Ill have you prices in about 10 mins :)

DSMDuDE
01-30-2007, 10:38 AM
Knock Sensors = 12589867 x 2
W/PUMP = 89017593 incls gasket and t-stat
intake gaskets = 12533587 incls 8 seals
SEAL,INT MANIF = 12560251

If you would like some pricing from me..Just shoot me a PM

Thanks
Nick A.

GTSLOW
01-30-2007, 01:33 PM
Sweet so the sensors are the same for the front and rear?

+1 for you dewd!

DSMDuDE
01-30-2007, 01:51 PM
Thanks!

Front and rear sensors are the same, yes

theavenger333
01-30-2007, 06:18 PM
gmpartsdirect?

DSMDuDE
01-30-2007, 10:41 PM
I work at a GM parts Department

theavenger333
01-31-2007, 02:17 AM
i realize this, i was pointing out Nanny's laziness

A B4C Z
01-31-2007, 06:51 PM
Just for a little FYI. Most of the water pump leaking is due to bad gaskets. So take a close look. I havent seen many acutally leak out the weep hole is mainly the gaskets(ls
-x based cars/trucks) 100+dollors vs. 6.00. Id take a closer look.

Kyle

GTSLOW
02-01-2007, 10:26 PM
Just for a little FYI. Most of the water pump leaking is due to bad gaskets. So take a close look. I haven't seen many actually leak out the weep hole is mainly the gaskets(ls
-x based cars/trucks) 100+dollars vs. 6.00. Id take a closer look.

Kyle

Ya it was originally leaking from the gaskets. Now its just got that god awful lsx water pump squeak.