PDA

View Full Version : Privat wheels (Evo pattern) Black/Polished lip $200



PureSound15
09-11-2006, 08:11 PM
Hey guys, I have had this set of evo rims sitting in my garage for a couple months now and would like to ditch them. I have 4 of this exact wheel
http://www.customwheelsdirect.com/images/wheels/Privat_Wheels/Profil_Blk.jpg

18x8.5 and they were on an evo for 3 days before two of them were dented from the lack of contruction cones during the repaving of a section of 164. So... 2 of them have bent lips, nothing that can't be fixed, two of them however are perfect. So... seeing as you cannot find these wheels for anything less than $240/Wheel... how about all 4 of them for $200? I have no use for them.

let me know! I'd like them out of my garage!

~Ryan

sloLs1
09-11-2006, 08:46 PM
do you have pics of the "dents"

PureSound15
09-11-2006, 09:10 PM
I don't right now, I'm up at school. I can take some when I get home though, I was just seeing if I should throw them on ebay or if anyone would actually be interested on here.

I'll get some pictures as soon as I can.

saleenclone
09-12-2006, 11:16 AM
do they still hold air w/ the dents?
what the bolt pat.

loud91rs
09-12-2006, 03:41 PM
I'm pretty sure the bolt pattern on those are 5x114...i'd be all over this if they were 5x100

sloLs1
09-12-2006, 06:09 PM
if they fit evo's... there 5x114

Poncho
09-12-2006, 06:16 PM
5x114.3????

would fit mustangs and most FWD gm too.

Car Guy
09-12-2006, 06:39 PM
5x114.3????

would fit mustangs and most FWD gm too.


Most FWD GM wheels are 5x115mm, and the offset would be too much for mustangs......

Poncho
09-12-2006, 06:41 PM
Most FWD GM wheels are 5x115mm, and the offset would be too much for mustangs......

yea, but I had wheels made for a mustang on my old GTP so they can interchange -- and I'm curious on the offset, as the 05+ have an awefully high offset.

Car Guy
09-12-2006, 06:46 PM
yea, but I had wheels made for a mustang on my old GTP so they can interchange -- and I'm curious on the offset, as the 05+ have an awefully high offset.


Technically you can interchange them but it's not a perfect fit like it should be, I've seen lug holes cracked and/or ovaled out so you have to be careful.....

PureSound15
09-12-2006, 11:25 PM
They don't hold air as it's the lip that's bent so the tire doesn't seal. I had one quote for both of the wheels to be fixed and it was $288 or something to that tone. They were on a 04 EVO, I'm not sure what the pattern is, I just bought them for the eagle f1's that were on them.

Anybody? Shoot me an offer I just want to get rid of them.

PureSound15
09-24-2006, 05:35 PM
Sold! :banana1: :banana1: :banana1: