PDA

View Full Version : FS: 350 4-bolts



350-Z28
09-07-2006, 11:36 PM
I have for sale one 350 4-bolt bare block with a bucket of rods, main caps, and pistons. Block needs to be cleaned up but looks pretty good, was going to be a build for a friend but they stabbed me in the back and now i'm shafted with parts. $50 takes the whole thing.

350 4-bolt short block with forged crank, brand new starter, waterpump still attached. I ran this is my camaro, only 5,000 miles on a rebuild before it was pulled, ran like a top before being pulled. Will need some cleaning as it was outside for about a week before i got my hoist back. It has in it right now a lunati bracketmaster 2 cam. for that i'd like $300 for the short block.

I still have an extra set of cylinder heads from a 327 that would work for that motor. $40

I have the brodix intake manifold with your choice of carb $250

Whichever carb isnt gone with intake $75

I have much more stuff and it all needs to leave, prices are negotiable.

t_a_crazy121
09-08-2006, 02:45 PM
what are the CFM's on the carbs that you have

350-Z28
09-08-2006, 04:12 PM
600 CFM and 750 CFM both are edelbrocks

t_a_crazy121
09-09-2006, 03:37 PM
i am interested in the 600 carb and the first 350 block, is there any pitting in the 350 or is it just surface rust and is it cracked or anything of that sort

350-Z28
09-09-2006, 07:54 PM
Just surface rust on that block, and no cracks that i could see.

MY FYN 79
09-10-2006, 08:17 PM
Which Brodix intake is it?

Got any Chevy 400 parts?

350-Z28
09-10-2006, 11:44 PM
No 400 parts, and its the Brodix Pro-Bracket (or pro-bracket 2) intake it's barely been run three months before i stopped driving the car and pulled the motor