Any AK-47 or AK-74 Variant Builders?

[MurphysLaw88GT]

Anybody else build parts kits. Just ordered a Polish AKMS Underfolder, and was wondering if anyone had any riveting jigs, or shop presses for pressing the barrell out of the front trunion. Well, just seeing if anyone else builds these things.Thanks in advance:thumbsup .
-Kevin M

[MurphysLaw88GT]

I just want to see what others have before spending $$ on jigs.

[TurdT/A]

Are you the BATFE?

[TurdT/A]

I'd be willing to go havesees on one.

[MurphysLaw88GT]

No, not a federale*in best mexican voice*, have you built any before?

[Rocket Power]

Haven't done one yet but when I do I'll probably do a screw build instead of a rivet build. Seems easier, and I am lazy.:goof

I just spent a lot of money in the last couple weeks so any building I do will have to wait:(

[TurdT/A]

No,I haven't, but I have a kit.Same as Rocketpower I want to use a screw kit,and was looking at one of those fold at the line receivers.I would much rather use a stamp bended one,but cant see spending the money on the equipment,to do just one.

[MurphysLaw88GT]

I am buying a 100% reciever from NDS, so i wont need a bending jig, just all the bullshirt to rivit 'er together

[Rocket Power]

I am buying a 100% reciever from NDS, so i wont need a bending jig, just all the bullshirt to rivit 'er together
NIce :thumbsup
They're supposed to be about the best.
Who around here does FFL transfers cheap?

[MurphysLaw88GT]

let me know who does Xfers on the cheaper side. otherwise i will go to fletchers cause they are close to me.

[TurdT/A]

If you want 100% recievers for decent prices, I suggest waiting and checking out some of the upcoming gun shows in the area.There are some usual vendors that always have various makes.Seen several from $100-$140 range.Yellow form on the spot,and go home with it.Sometimes run into private sales too if you want to be ultra paranoid. September 1 - 3, 2006
Ice Arena
Eagle River, WI
Map

September 8 - 10, 2006
Omni Center
Onalaska, WI
Map

September 15 - 17, 2006
Expo Forum
Waukesha, WI
Map

September 22 - 24, 2006
Civic Center
Baldwin, WI

October 6 - 8, 2006
Ice Arena
Rhinelander, WI

October 27 - 29, 2006
Fairgrounds
West Bend, WI

November 10 - 12, 2006
Expo Forum
Waukesha, WI
Map

December 1 -3, 2006
Sunnyview Expo Center
Oshkosh, WI

December 8 - 10, 2006
State Fair Park
Milwaukee, WI
Map

December 15 - 17, 2006
Expo Forum
Waukesha, WI
Map

December 29 - 30, 2006
Brown County Fairgrounds, Shopko Hall
Green Bay, WI
Map

January 5 - 7, 2007
LaCrosse Center
LaCrosse, WI
Map

January 19 - 21, 2007
Fairgrounds
Janesville, WI

January 26 - 28, 2007
Expo Forum
Waukesha, WI

[MurphysLaw88GT]

Thanks, i was wondering when the shows were coming to town

[MurphysLaw88GT]

Fletchers wants 50 bones for an Xfer

[USMARINE1108]

Rivets are the only way to go if you ask me. What triggers are you guys using? Red Star Arms makes a great one.


Any AR builders in here?

[UnderPSI]

Mmmm AR15's & AR10's

[USMARINE1108]

Mmmm AR15's & AR10's



http://img144.imageshack.us/img144/3708/arfgr7.jpg (http://imageshack.us)

[UnderPSI]

Ha! Thats funny +1 for you.

[MurphysLaw88GT]

lots of people suggest a TAPCO G2, but i hear RSA FCGs are the shiyyat, and will most likley use them. BTW, FAL guys, Centerfire Systems has FAL parts kits for cheap right now http://www.centerfiresystems.com/index.asp?PageAction=VIEWPROD&ProdID=727 , not matching #'s tho . Too bad FAL recievers are not cheap!

[MurphysLaw88GT]

Anybody here actually do a rivet build, not knocking screw builds, but would like to do a rivet build. Any help much appreciated. When parts kit arrives, will post pics.

[USMARINE1108]

Anybody here actually do a rivet build, not knocking screw builds, but would like to do a rivet build. Any help much appreciated. When parts kit arrives, will post pics.


http://ar15.com/forums/forum.html?b=4&f=51

That's AR15.com's AK build it yourself forum. LOTS of good info on there. Helps out quite a bit.

[MurphysLaw88GT]

ever go to gunsnet.net....lotsa goodshit there

[MurphysLaw88GT]

Got the parts kit today!!!! Cant wait to start.

[Rocket Power]

So where are the "before" pics ?:goof

[MurphysLaw88GT]

I knew i shouldnt have de/cosmoed the front upper/lower handguards yet. Gotta wait to get reciever, skoolbooks ran a train on my bank accoount

[MurphysLaw88GT]

I will try to get whiteZ to take some pics

[Rocket Power]

Gotta wait to get reciever, skoolbooks ran a train on my bank accoount
I know how that is. How can they sleep at night charging $100 for a flippin' book?:mad:
I am itching for a new firearm. I was thinking of ordering a CZ-52 but not positive yet. They're supposed to be fun:banana

[MurphysLaw88GT]

The cz52's are cheep right now. Gte the ones finished in grey, they are originals in nice shape, instead of remanned "black" ones. BTW, i paid more than 100$$$ a book, for a few books

[Rocket Power]

Damn, my most expensive one was $110:stare

I am going to see what the gunshow this weekend brings otherwise I'll be ordering a CZ on Monday from either SOG or AIM.
BTW all this AK talk made me order up some Tapco flats a few minutes ago:rolf
Figured for 6.99/ea I can let them sit for a while if need be:thumbsup
http://www.tapco.com/product_information.asp?number=AK0665R&back=yes&dept=96&last=96

[MurphysLaw88GT]

If you ever want to start building em, shoot me a PM.Are you on gunco.net?, i seen a guy with a screename of "rocketolds455" or something.

[Rocket Power]

Will do. I really would like to do a pistol build too just for fun. Hmm maybe a should do a couple ak's instead of the FAL. decisions ,decisions:goof


I go to gunco.net once in a while I don't remember if I've ever posted, mostly a lurker. I am vista461 there and most everywhere else except here and bcsm.

[MurphysLaw88GT]

If you are into Krink kits, think about getting one soon before they dry up, as the shipments of "quality" kits are becoming a memory, and many parts kit suppliers are scraping the bottom of the barrel lately. I only got one from Bob at Akron Armory cause his kits are reputed to be awesome, which i can vouch for, even with mine being "service grade", it is much nicer than i had envisioned. As for a AK "pistol", kinda neat, but something I could get into trouble with easily LOL. BTW, the AKMS kit i got from Akron Armory is pictured here at Bob's site... www.akronarmory.com/. It is pictured under the "Tantal" kit.

[Rocket Power]

Hmm maybe I will give up on the FAL. I could do a bunch of different AK builds, Pistol, Rifle, SBR if I have some extra $$ to give to the ATF:goof

Everyone loves an AK, Last time I went shooting with my friends my WASR was a crowd favorite:goof

[MurphysLaw88GT]

My WASR is a poorly finished pos.the trigger is the muddiest trigger pull i have felt in a while too. Retarded apes with hammers and welders build em for CAI. At least i got it for free

[Rocket Power]

I have a single stack so it came unmolested by the century monkeys:rolf
Mine is decent and I paid like $230 at Dunhams for it.
I got the single stack so if I wanted to cut out the well I could and would only have myself to blame if turned out crappy. But since it looks like I'll be doing at least one AK, I guess I am going to leave it as is. Maybe throw a red dot on it and use it for deer.:banana1: Where I hunt the shots are short.

[MurphysLaw88GT]

There are templates that you can put on the gun while you cut.

[Rocket Power]

We'll see.:D

Can't wait to see if there is anything good at the gun show tomorrow:banana1:

[Rocket Power]

Gun Show was crap everthing was over priced:mad:
No decent AK kits, I did see a polish tantal but it didn't look that great. A guy was selling cz52's for 250, I don't think so.:goof



I ended up buying gun stuff at stores today. Dunham's has 7.62x39 for $2.99/box so I picked up 15 boxes:thumbsup and my tapco flats got here. 2 have no rust i can see 1 has a rust stain and 1 will need about 10sec with a wire wheel:banana def worth 6.99 each.

[MurphysLaw88GT]

the stuff at dunams, was it fmj or hp

[Rocket Power]

Yes:goof
They had both. I went to the Cudahy one and they had a bunch left. I don't know about the West Allis one. I bought FMJ.

[Rocket Power]

Got a romy kit on the way now:rolf

[MurphysLaw88GT]

good to hear

[Rocket Power]

Got my kit I ordered a parts missing kit from century, it was $69 with my discount. Well it was missing parts but I did get $69 bucks worth of parts, but I will need some stuff to do a build with it. It is a 1964 Romanian, but not a "G" rifle. Worth a shot , but I will get my next kit elsewhere. At least the bbl, bolt and carrier and gas piston were there.:goof

[USMARINE1108]

Got my kit I ordered a parts missing kit from century, it was $69 with my discount. Well it was missing parts but I did get $69 bucks worth of parts, but I will need some stuff to do a build with it. It is a 1964 Romanian, but not a "G" rifle. Worth a shot , but I will get my next kit elsewhere. At least the bbl, bolt and carrier and gas piston were there.:goof

What was missing? I thought about picking one up.

[Rocket Power]

Trigger group, part of the spring guide rod, upper handguard,pistol grip, front sight post, rear sight. Blueing is pretty wiped out, but it's an AK not a new browning so I don't care about that. That's all I can think of right now. The trig group is no big deal, since I'd be getting a G2 anyway. All in all I didn't get ripped off but it wasn't as good a deal as I thought I might get. Live and learn

[MurphysLaw88GT]

Akron Armory=FTW, bob dont **** around with his kits

[Rocket Power]

I am thinking this may be a pistol build with this kit. I put the vertical gripped lower handguard on my WASR . I like it so far we'll see if I like it when I try it sunday:goof

I wonder if they make a IWB holster for an AK pistol for when we get CCW:rolf

[MurphysLaw88GT]

Rambo^^^^

[Rocket Power]

Rambo^^^^
:rolf
Hardly

[MurphysLaw88GT]

When u screwin it together. How u de-millin the kit

[Rocket Power]

It'll be a little while yet, probably during winter. Between work and school I don't have a lot of free time. As far as demilling. Might buy a cheap drill press or may have to borrow one, not sure yet. As you can see my plan is: Get the pieces then figure out how I am going to finish:goof

[MurphysLaw88GT]

buying an MG-42 parts kit!!!!!!

[Rocket Power]

Damn :stare :thumbsup That's way cool
Do they make semi auto conversions for those?

[MurphysLaw88GT]

yes there are..............just kinda $$$$$$. Gotta get one before the kits are all gone

[MurphysLaw88GT]

:banana1: :banana1: :banana1: :banana1: :banana1: :banana1: :banana1: :banana1: :banana1: Bought the "zipper" today:banana

[Rocket Power]

Sweet:headbang

[Rocket Power]

So did the zipper arrive safely?

[MurphysLaw88GT]

yes it did:devil :devil :devil :devil :devil :devil :banana1: :banana1: :banana1: :banana1: :banana :banana :banana :banana :banana1: :banana1: :banana1: :wooo :banana :devil

[MurphysLaw88GT]

Well, Does anybody know where CHEAP ffl transfers are

[Rocket Power]

As a matter of fact I was just looking at that because I may buy a used 3rd gen S&W police trade in, in the near future.:thumbsup
I'll hit you with a PM

[USMARINE1108]

Time for the thread to come back to the top. Who's got plans for their tax returns?

I just picked up a little something in 7mmRUM. Time for some new dies.........

[Rocket Power]

I have a Cetme kit and reciever on the way :headbang :banana1: gonna try my hand at that. Found an FFL right in tosa to do the reciever transfer for $20. Guy has been really cool so far. Reciver is supposed to go out friday so hopefully I'll have it next week. Stiil haven't gotten the AK kit demilled yet, though

[MurphysLaw88GT]

i have a built cetme if you would need it as a reference. My NDS ak reciever has not come yet.....waiting

[Rocket Power]

I may take you up on that. We'll see how it is when it gets here . My Century rep called me today and the receiver shipped today so I should have it around the end of next week hopefully. Now I have to figure out what I am going to do for compliance parts.:goof

[MurphysLaw88GT]

I am gunna put a bayonet lug back on mine, as well as the stock flashider from BEFORE century got their hands on it. Also, i have the CETME wood stock on it, but i an going to put a HK G3 stock on it. Centerfire Systems has the HK stocks in green (19.95) or black (29.99).Cant go wrong on prices like this. Stock up on .308 too while you can!!!! Getting more scarce. I need to pick up more SA R1M1 .308, and I need to buy 2 cases of 8mm mauser, going to red wing MN to shoot a F/A MG-42:devil :devil :devil :headbang

[MurphysLaw88GT]

BUild Party!!!!! seriously, one of these days, then shortly after, BCM range day!!!!!

[Rocket Power]

Shooting a F/A MG-42 would be cool as hell.
Yeah I should get some .308, I saw today why people say to stay away from the Indian crap, There was a guy at the state fair show selling it in 10 round packs, I picked up two of them to look at . One had a neck split to the shoulder and the other had a bullet half out of the case. WTF, ice QC over there:goof

I did pick up 3 compliance parts while I was there, a US mag:headbang

I want to try to keep the wood if possible, but who knows.

[Rocket Power]

BUild Party!!!!! seriously, one of these days, then shortly after, BCM range day!!!!!
Sounds like it could be fun. Guns and cars, why couldn't I have CHEAP hobbies:rolf

[USMARINE1108]

BUild Party!!!!! seriously, one of these days, then shortly after, BCM range day!!!!!


I'm in! Wont be back until Sept/Oct.

[USMARINE1108]

Stock up on .308 too while you can!!!! Getting more scarce.


http://img291.imageshack.us/img291/7998/00000leeclassicpresswb4.jpg (http://imageshack.us)

[MurphysLaw88GT]

Yeah yeah.....

[Rocket Power]

My Cetme kit came today:banana1:

http://usera.imagecave.com/vista461/cetmekit.jpg

[USMARINE1108]

What do you still need? I've never messed with one of those.

[Rocket Power]

The reciever (coming this week) and compliance parts which on a CETME with a muzzle device is a min of 7, I'll have 4 when the reciever arrives, need 3 more.

[MurphysLaw88GT]

My CETME has the bullchit flashider, putting on the "correct" flashider/grenade launcher. Want to do this http://www.surplusrifle.com/reviews2006/fore/index.asp

[MurphysLaw88GT]

No barrel???? ARGGGH, effin barrel ban!!! Centerfire systens has cheap CETME barrels http://www.centerfiresystems.com/index.asp?PageAction=VIEWPROD&ProdID=859

[Rocket Power]

HAD some

This item is SOLD OUT and DISCONTINUED. Backorders are NOT being accepted.

[Rocket Power]

Mine came with a brand new barrel, still an import, but brandy new and in the white:banana1:
It's half out of the wrap at the bottom of the pic

[MurphysLaw88GT]

Kevin=Teh blind

[Rocket Power]

:rolf

Have my reciever now:banana1:
Now I just need to start demilling the parts kit.

[USMARINE1108]

My CETME has the bullchit flashider, putting on the "correct" flashider/grenade launcher. Want to do this http://www.surplusrifle.com/reviews2006/fore/index.asp

I've got one of those for a SKS. Never fired it because I have never felt like buying blanks............

[MurphysLaw88GT]

What do you still need? I've never messed with one of those.

Have you built anything before?????

[USMARINE1108]

Have you built anything before?????

PM inbound

[Rocket Power]

Oh sure now you guys are keeping secrets:goof

[MurphysLaw88GT]

Oh sure now you guys are keeping secrets:goof

PM inbound:goof







Happy!!

[USMARINE1108]

Oh sure now you guys are keeping secrets:goof

I'm not one of those guys who burys firearms and ammo in PVC pipe in the back yard for when the zombies attack, but I don't like to post what I've got all over the inter-web for anyone to see either.
Know what I mean?

[Rocket Power]

I see you point , just joking around

[MurphysLaw88GT]

:wow G3/CETME mags 50 for 50$$$:thumbsup


http://www.tapco.com/proddesc.aspx?id=6ff3dd45-1089-4a1f-9521-4a2f8483561d

[Rocket Power]

I saw that I just can see needing 50 mags, I couldn't afford to feed them all:rolf

[MurphysLaw88GT]

you can always try though

[MurphysLaw88GT]

My reciever shipped out on Friday, so that is good.

[Rocket Power]

Cool:thumbsup

[MurphysLaw88GT]

Fawkin store closed today, UPS cannot deliver until store opens, or at least their order tracker says

[MurphysLaw88GT]

:banana1: :wooo :wooo Got it, now i need to rivit that thing together

[Rocket Power]

I am slacking. I need to get to work demilling the CETME. I just bought a US stock set on ebay,bringing me to the minimum US parts required:banana1: ,Now I can relax abit and look for a cetme us trig group or change over to a US G3 trig group so I can put the wood on. I also bought the "Building the G3 " video from brownells for visual reference on demilling

[Rocket Power]

Well I started demilling, Got the trunion and cocking tube out of the receiver chunk. Need to get to a belt sander and grind off the little spotweld nubs from the trunion.
:banana1:

[MurphysLaw88GT]

on my century, i need to cut the weld from the cocking tube where it meets the reciever, as it seems to be a little out of true, fsb is canted a hair and it looks like they just welded it together anyway.

[MurphysLaw88GT]

want to buy a CZ-52 bad. maybe this week. Jamie, do you know anyone locally who would sell one they have? Hate going thruogh hoops, prefer "private sales", I dont have a criminal hist., but it is a ***** to wait three days.

[Rocket Power]

That's century for you:goof not sure how easy that'll be without f'in up the tube or receiver. Santa Barbara loved their spot welder when they built my gun, they had what looks like 8 spotwelds plus the receiver to cockingtube joint weld.
Did century just do the one at the front of the receiver?
here's a pic of my cocking tube and trunion from today, Looks like one or two of the spotwelds held on too good and removed holes in the tube. I don't think they'll be a problem since it's inside the receiver

http://usera.imagecave.com/vista461/cockingtubeandtrunion.jpg

[Rocket Power]

want to buy a CZ-52 bad. maybe this week. Jamie, do you know anyone locally who would sell one they have? Hate going thruogh hoops, prefer "private sales", I dont have a criminal hist., but it is a ***** to wait three days.

No I don't know anyone off hand, and I ain't sellin mine;)
Last one's I saw at the gunshow was like $230:wow but that dude always has overpriced stuff.
I paid $139 (shipping was like $28 bucks though since they ship them overnight) for mine from AIM.
There is a gunshow next weekend in Waukesha, you might get lucky and find a private guy. And also stock up on some surplus ammo while it's still cheap:D

[MurphysLaw88GT]

how you like your CZ?

[Rocket Power]

I like it, I've put about a box and a half of winchester through it (it's either made by privi or S&B I forget which). No failures at all. I have heard not to trust the decocker on them. Seems pretty accurate. Mine is the gray park finish rather than the blue/black I have seen others in. That 7.62x25 is a wicked little round:D

[MurphysLaw88GT]

Badass, im going to buy one

[Rocket Power]

Cool, hope you find a good price:thumbsup

[USMARINE1108]

I just got the new Centerfire and they've got CZ52's for $139.97

[MurphysLaw88GT]

i saw that:devil :devil :devil

[Rocket Power]

AIM still has them too
http://www.aimsurplus.com/acatalog/CZ52_7_62x25_Pistol.html:headbang

[Rocket Power]

I want one of these, I have a craving for a 3rd gen Smith & Wesson. But my wallet says I have to wait:goof

http://www.aimsurplus.com/acatalog/Police_Trade-in_Smith___Wesson_4006_.40sw_Pistol.html

[MurphysLaw88GT]

Got 12 AK 30 rd. mags from SG for 80$

[Rocket Power]

Not bad, I just ordered 15 G3 mags for $1.20 each from copesdist on Sunday. Must be a good week to buy mags:rolf
I should get more AK mags but I haven't yet. Seems like now is the time to stock up on hi-caps

[MurphysLaw88GT]

Didnt you hear.....GM bought out the Izhmash & Tula AK plants in Russia! Thats why we are in the GM forum.

[Rocket Power]

:rolf
I just saw that. Well they used to own CETME in Spain too:goof

[Rocket Power]

Took my CZ out today but couldn't use my Surplus ammo, I did a magnet test right before I left.:(
Had to use the last 25 of my Winchester 7.62x25

[MurphysLaw88GT]

kickass:sniper :sniper :sniper :haveabeer

[Rocket Power]

And I rented a S&W 4006 to try out. Bad idea, now I want one:rolf

[Rocket Power]

Got my mags yesterday, they range from 1963-95 and most look like they've never been used, a couple have some finish worn off. Can't beat it for $1.20 each:banana1:

[MurphysLaw88GT]

I gotta buy some Romy 8mm mauser. The dude with the MG42 wants me to run that in it, so im going to buy a crate

[Rocket Power]

Sounds good, I've heard that's good stuff

[MurphysLaw88GT]

And I rented a S&W 4006 to try out. Bad idea, now I want one:rolf

Sell me your VZ52 and you can get one:goof









Seriuosly

[Rocket Power]

It's at the shooter's shop, I'd need to sell you 3 of them:rolf
and I don't have 3:goof

[MurphysLaw88GT]

offer=on table:D




Probably the most drama free thread on this site thus far

[MurphysLaw88GT]

http://www.gunco.net/forums/showthread.php?t=31934


:mad: http://www.freerepublic.com/focus/f-news/1787856/posts:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: Way 2 only keep cool shit outta hobbysts hands.

[Rocket Power]

Yeah that's one of the things that got me rollin' on the cetme build and to buy mags while they're still cheap. I remember when the first one was passed. It sucked then , and I am sure it'll suck worse now.

[Rocket Power]

If they were actually honest, they'd admit it's not the people who obey the laws who are the problem, it's the criminals. And that law ain't going to do crap about them.

[MurphysLaw88GT]

Exactly, but it would appear that i am preaching to the wrong choir

[Rocket Power]

Wow we're up to 7 pages of gun talk in the GM forum:rolf

[MurphysLaw88GT]

Wow we're up to 7 pages of gun talk in the GM forum:rolf

:banana :banana :banana :thumbsup :banana1: :banana1: :banana1: :banana1:

[MurphysLaw88GT]

I went and requested my C&R paperwork from the ATF today.

[Rocket Power]

cool:thumbsup :headbang

[MurphysLaw88GT]

http://www.aimsurplus.com/acatalog/Police_Trade-in_Smith___Wesson_4006_.40sw_Pistol.html


You know you want it!!!

[Lash]

http://www.aimsurplus.com/acatalog/Police_Trade-in_Smith___Wesson_4006_.40sw_Pistol.html


You know you want it!!!

Intersting.

I've been looking for a new pistol...and thats a pretty good damn price!!!

[Korndogg]

Ive been meaning to apply for a FFL one of these days.

[MurphysLaw88GT]

Argggghhhhhh! Moved again, i was beginning to like the tech section!

[Rocket Power]

http://www.aimsurplus.com/acatalog/Police_Trade-in_Smith___Wesson_4006_.40sw_Pistol.html


You know you want it!!!

Yes , yes I do. I am sending you a PM:thumbsup

[Rocket Power]

Argggghhhhhh! Moved again, i was beginning to like the tech section!


Lucky I am setup for notification or I'd get lost :rolf
I like our last hideout in the tech section, can we go back?:goof

[MurphysLaw88GT]

i will PM Yoo and ask.

[Rocket Power]

I am guessing it'll be no

:rolf

[Rocket Power]

BTW this guy has good prices too http://www.summitgunbroker.com/ , and has a good rep on the www.smith-wessonforum.com

[USMARINE1108]

General Disc? I couldn't find the thread at first, I thought it was the stupid internet here in Japan!

Kind of sucks being away from my safe for 6 months












(but I do get to play with some pretty cool stuff anyway)

[USMARINE1108]

So what do you guys think of this HR 1022? I don't think it's going anywhere, but I also think it's the first of many gun control bills until the libtards get what they want.

[Rocket Power]

I hope it goes no where. I wasn't real fond of the last one when preban glock mags were going for $90:mad:
Hopefully the libs will be out of power again in 2 years:headbang

[USMARINE1108]

http://www.assaultweaponwatch.com/

[MurphysLaw88GT]

******* laughable..

[SSDude]

http://www.assaultweaponwatch.com/

That chit is so funny. "Please donate"

[Rocket Power]

I think I saw it move, maybe it will harm an innocent person:rolf

[Rocket Power]

Don't make me bust out a flash hider and a bayonet lug:rolf

[Korndogg]

hahahahahahahaha....


i really dont get that site.

[Rocket Power]

It seems like a joke, making fun of all the gun haters that think if you own a semi auto rifle you're going to mow down a playground full of kids.

Ted Kennedy's car has killed more people than my gun:goof

[Korndogg]

I hope its a damn joke.


Im gonna find that little corner and switch that gun with an airsoft rifle. theyll never know lol

[Rocket Power]

Does an airsoft rifle only attack cabbage patch kids and barbie dolls? :goof

[USMARINE1108]

Ted Kennedy's car has killed more people than my gun:goof

Guns kill people like a spoon made Rosie Odonnell fat.

[USMARINE1108]

It seems like a joke, making fun of all the gun haters that think if you own a semi auto rifle you're going to mow down a playground full of kids.



Thats exactly what it is. The sarcasm in there is so thick, I love it! It was set up by some guys on AR15.com. One of the things that pisses me off is the term "assult weapon" being thrown around to make a rifle sound evil. Technically speaking, an assult rifle is one that:
-fires ammunition with muzzle energies intermediate between those typical of pistol and battle rifle ammunition
-fires 20-30 rnd detachable mags
-has a pistol grip
-has a flash hider
-has a bayonet lug
-is select fire.

Now, select fire means that it is selectable from semi to full auto. Clinton's ban of "assault rifles" technically banned M-16's (not AR-15's) and all other similar rifles that are not class 3. It was just given the term "assult rifle" to scare people and is now commonly (wrongly) used to categorize certian types of firearms.