PDA

View Full Version : Question about headers for a '67.



GTSLOW
08-01-2006, 10:54 PM
My boss at work has a 67 Mustang with a 351W he doesnt think the make headers for them since its a non orignal motor.

Anyone have any links to anything or is he stuck with custom? Its got a C4 if that matters?

Irish
08-02-2006, 12:43 AM
Summit!

Prince Valiant
08-02-2006, 07:01 AM
plenty of headers out there...call em up and they'll give you the part number.

animal
08-02-2006, 07:11 AM
67 shouldn't even be a problem since those were able to fit big blocks. the 64-66 is where it's a real tight fit. All of the major header makers should make them for the 67. You could likely even use 302 headers as the only difference between the two is about a half inch in deck height. I don't think that would be enough to make headers not fit in a car made to take a big block anyways. I got some 351 hedman headers for like $110. Granted, hedman quality is somewhat lacking, I didn't want to spend $400 either.

68RR440
08-02-2006, 08:47 AM
Hooker Header part # 6116-1HKR
Super Comp. Ceramic Header
67–70 Mustang/Cougar, 66–69 Falcon/Fairlane/Torino/Ranchero/Comet/Cyclone/Montego: 351W, Full Length Tube 1.625" x 29", Collector Size 3", Collector Length 8", Port Shape: Same As Port, Metallic Ceramic

DRK
08-02-2006, 08:52 AM
heere are some with decent size tubes and steps

http://www.fordpowertrain.com/FPAindex/headers1.htm