PDA

View Full Version : Garage sale!!! SBC parts



350-Z28
07-21-2006, 09:31 PM
I will negotiate!!!

Up for grabs is a Brodix pro-bracket aluminum intake with 2,000 or less miles on it for $200, or $300 with your choice of edelbrock 4-barrels, either 650 cfm or 750 cfm and a edelbrock proflo 360 degree intake with brand new K&N filter

Howards Cams 1.5 ratio billet aluminum roller rockers 3/8" stud with extended nuts. 1500 miles on these. Annodized purple appearance. $125

Two edelbrock carbs (unless one leaves with intake) 650 and 750 cfm available. I would like to get $100 a piece, price is negotiable

I have a relatively mild SBC cam mildly used for $25

If you want slightly more agressive cam I could pull my Lunati bracket master 2 cam out of my block, low mileage cam $35

Lunati hydraulic flat tappet lifters $20

Good recently rebuilt T-5 manual trans for 82-92 camaros with bell housing and clutch with less than 5k on the clock $300 for the package

Universal traction bars for cars with leaf spring rear suspension. I mistakenly bought them for my car last year at Iola for $85, will sell for $50 never been bolted to anything.

Stock cast iron cylinder heads off of my 350. Less than 5k on the heads with new valve springs (wrong ones for my Lunati cam but better than factory) $60 for the pair.

I also have 2 more sets of cylinder heads, one off of a 327 vette motor i believe in good shape $50 for those, another set off of a 350 in need of complete tear down and rebuild, or a cool coffee table $25

I can also part with one of my 350 4-bolt blocks would need minor boring to clean up, hasn't been bored before and comes with a bucket of main caps rods and pistons. I would like to see $75 out of it, but we can talk about it.

I have a good passenger side fender for a 82-92 Camaro. $30

I have the front bumper with brand new headlights from my 84 Camaro in good shape needs paint $50.

If there are F-body parts you want but are not listed please message me and let me know, hardly anything on my car will be factory and lots will have to go. Feel free to give me a call at 262-352-0261

Side note I will be out of town July 28th-August 6th on a vacation but feel free to call and reserve something.

Tiresmokin
07-22-2006, 08:22 AM
I'm interested in the 350 4-bolt and the cylinder heads. Can you get me casting numbers from these items?
Thanks

350-Z28
07-22-2006, 10:37 AM
The block is a standard 010 casting, nothing special or rare, but which set of heads were you interested in?

Ricky Bobby
07-22-2006, 11:12 AM
im interested in the cams shoot me the specs on both plz

Tiresmokin
07-22-2006, 11:23 AM
The block is a standard 010 casting, nothing special or rare, but which set of heads were you interested in?
All of them.

350-Z28
07-22-2006, 11:41 AM
all as a package deal?

Gunmetal I had the specs for the Lunati but lost them, I know its .480/.480 lift, and i believe duration was in the nighborhood of 262? The mild cam I believe has .424/.414 for the lift the guy i bought it from knew the specs but i somehow managed to lose them. Only thing i could think of is trying to find the part number. I'll look up the lunati to make sure and post it back for ya

Ricky Bobby
07-22-2006, 12:35 PM
i need to know the duration at .05 for the lunati cam plz, and do u have springs to go with the cam maybe cause this is goin in a derby motor

350-Z28
07-22-2006, 02:37 PM
The springs i bought for the cam are not the right ones, the guy at the speed shop didn't know all the specs of the cam so I wouldn't want to sell those to you. Advertised duration is 292/292, duration at .05 230/230, lobe seperation angle is 109/107.

subliminal1284
07-22-2006, 03:25 PM
Got a good gray hardtop headliner?

hotshift13
07-22-2006, 03:27 PM
I have a 89 trans am. I am very intrested in the t5 trans!! do you have a pedal assembly also and the drive shaft too.

350-Z28
07-22-2006, 04:15 PM
My headliner was blue, and got thrown out when i stripped it, was sagging.

Hotshift i still have the driveshaft and pedal assembly, pedal assembly is still bolted in body but i could pull it for you if you like.

Poncho
07-22-2006, 05:51 PM
specs on both cams, I think I'm interested in that Lunati, want something that will play nice with the power band of my Tuned Port on my TA.

hotshift13
07-22-2006, 09:10 PM
cool I will call you on sunday:thumbsup are the heads pre 89 or what> I plan to build a nice small block for my wifes t/a and im just curious to what else you have lying around!!

Tiresmokin
07-22-2006, 11:07 PM
all as a package deal?

Gunmetal I had the specs for the Lunati but lost them, I know its .480/.480 lift, and i believe duration was in the nighborhood of 262? The mild cam I believe has .424/.414 for the lift the guy i bought it from knew the specs but i somehow managed to lose them. Only thing i could think of is trying to find the part number. I'll look up the lunati to make sure and post it back for ya
Yep, I would be interested in all 3 sets of heads and the 350 block. Just need some #'s off the heads.
Thanks

350-Z28
07-23-2006, 12:42 AM
All heads are pre-89 and i will look up the numbers tomorrow when i get back home.

Unfortunately i cannot locate specs on the other cam, but from all appearances it is very new, or never used, or at least not for long. If gunmetal doesn't buy the lunati it is yours judge. Like i told him i do not have the matching springs for it, however i do have some lifters i could throw in as part of the package.

I do have a set of comp cams lifters and springs to match up with a cam i bought a while ago for a nice build i was going to do for a friend before they shafted me. All pieces are brand new and have not left the box, i did however stealthe stickers =P I could see what i have in that set for you judge as an alternative and will post specs.

350-Z28
07-23-2006, 05:55 PM
Bumpity bump bump stuff needs to go, lets make a deal

Ricky Bobby
07-23-2006, 07:59 PM
the cam i found out wont work with my app. so thanx though and good luck sellin :(

Poncho
07-23-2006, 08:50 PM
i'm trying to find out from jasper what is in my current 350, or ****, if it's even a 350, lol. but a whole package would be nice, either cam, but would to know some kinda specs, as who knows whats in my jasper..

350-Z28
07-23-2006, 09:27 PM
I'll post specs on the comp cams cam tomorrow, i know for sure its a real aggressive cam, i asked him to get me a big cam that was still streetable with a 700-R4 so it shouldnt be too wild.

Poncho
07-23-2006, 09:52 PM
oh so it was in the Z?? then I'm sure I'll be fine.

I looked up the Lunati, and theres a bunch of bracket master II's. one of which should be mild enough for my ta.

350-Z28
07-23-2006, 10:58 PM
Well the Lunati was in my Z, still is in the block just gotta yank it if you for sure want it. I do have specs for the comp cams set up now. Here they are;

Advertised duration 284/296
Duration at .050 240/246
Lobe seperation angle 110
Valve lift .507/.510

That comes with dual spring valve springs and lifters also all new in their boxes. I paid about $240 for the complete set would sell for $200. If interested in that let me know. If you're set on the lunati I'll pull it out of the block tomorrow (monday)

Poncho
07-23-2006, 11:02 PM
whoa, thats alot of cam.

which ever is milder, i have a feeling this comp will be the milder.

it'll be one hell of a cam on a ta choked up w/ TPI runners.

damn, i wanna fix up DD, then sell this TA, and you got me here thinking about vortec heads, Mini Ram, or SLP runners and making a real car outta this thing.

I'll say I'm very interested in that setup. but I will have to weigh my options and whats right, I was thinking about something milder like a 224/224, hell if the lift were in the .600 range it'd be a 450whp cam for my GTO, I have a feeling the TA will be extremely choked and run like ass. I'll have to hope somebody who knows can chime in and direct me somewhere.... bigger is not always better.

Corvette Jabo
07-24-2006, 06:31 AM
I am interested in the heads. Can you please send send the part and date casting numbers.
Jabo

350-Z28
07-24-2006, 07:15 AM
Will check casting numbers today when i get back from work.

Judge you're set on the Lunati or the comp cams set up?

Poncho
07-24-2006, 04:27 PM
whichever is milder. gauging from what I saw on the net, the lunati will be waaayyyyy too wild.

350-Z28
07-24-2006, 08:02 PM
I can sell you the comp cams set up and include for free the other unknown spec cam and see if you have better luck with part numbers than me

Poncho
07-24-2006, 08:17 PM
well ****...

that works.

lol

I'll start savin!! believe me i'm working all the hours I can.

350-Z28
07-24-2006, 11:48 PM
Could just trade me your GTO for everything i own =P

Cylinder head numbers are as follows:

327; 3795896 GM3
350?: 3890462 GM5
350 (from my maro): 333882 GM8T

Corvette Jabo
07-25-2006, 07:04 AM
Could just trade me your GTO for everything i own =P

Cylinder head numbers are as follows:

327; 3795896 GM3
350?: 3890462 GM5
350 (from my maro): 333882 GM8T

The date code is located right under the cast part number, it is also a cast. The GM3 & GM5 is not the date code. Can you tke another look?

Jabo

350-Z28
07-25-2006, 05:37 PM
Will do, might have trouble gettin the code off the heads from my camaro cause it took me about 5 minutes of solid staring to decipher the cast number, but I will look again tonight when i'm out in the garage again.

Poncho
07-28-2006, 07:20 PM
still interested. just trying to save up some money.

Corvette Jabo
07-31-2006, 06:21 PM
The date code is located right under the cast part number, it is also a cast. The GM3 & GM5 is not the date code. Can you tke another look?

Jabo

Anything.....Date code?
Jabo

350-Z28
08-03-2006, 06:28 PM
To any still interested in my parts I'm in Arkansas until tomorrow but will be functionally dead until sturday afternoon (Long haul). I'm getting date codes for Jabo. So if anyone else has any questions the best way to reach me is by phone.

262-352-0261

Corvette Jabo
08-06-2006, 10:52 AM
:crying :( :confused :crying :( :confused :crying :( :confused

Poncho
08-06-2006, 03:14 PM
i am interested.

just trying to collect some money.

Corvette Jabo
08-08-2006, 12:35 PM
If you leave the key under the mat and tell me where the 2 sets of heads are I could get the date code my self and if I don't want them I could post a picture and the date codes for every one else.

Jabo
:)

350-Z28
08-08-2006, 07:33 PM
Alright finally got to em, this week kinda has been hectic.

For the heads needing total rebuild J106
327 heads D245
For my camaro 350 heads i'm still not sure i have it right but its the only other number i saw and could barely decipher C24 75 (as it appears)

350-Z28
08-09-2006, 11:43 PM
Bumpin it up date codes are posted Jabo

350-Z28
08-12-2006, 08:04 PM
bumpity bump bump bump buy something so this thread can die

350-Z28
08-16-2006, 06:14 PM
pretty please so i can Judge's GTO? =P

Poncho
08-16-2006, 08:01 PM
money is tight, and your cam is too much cam for me